On Fri, Jul 7, 2017 at 1:13 PM, Xavier Hernandez <xhernandez@xxxxxxxxxx> wrote:
Hi Pranith,
On 05/07/17 12:28, Pranith Kumar Karampuri wrote:
On Tue, Jul 4, 2017 at 2:26 PM, Xavier Hernandez <xhernandez@xxxxxxxxxx
<mailto:xhernandez@xxxxxxxxxx>> wrote:
Hi Pranith,
On 03/07/17 08:33, Pranith Kumar Karampuri wrote:
Xavi,
Now that the change has been reverted, we can resume this
discussion and decide on the exact format that considers, tier, dht,
afr, ec. People working geo-rep/dht/afr/ec had an internal
discussion
and we all agreed that this proposal would be a good way forward. I
think once we agree on the format and decide on the initial
encoding/decoding functions of the xattr and this change is
merged, we
can send patches on afr/ec/dht and geo-rep to take it to closure.
Could you propose the new format you have in mind that considers
all of
the xlators?
My idea was to create a new xattr not bound to any particular
function but which could give enough information to be used in many
places.
Currently we have another attribute called glusterfs.pathinfo that
returns hierarchical information about the location of a file. Maybe
we can extend this to unify all these attributes into a single
feature that could be used for multiple purposes.
Since we have time to discuss it, I would like to design it with
more information than we already talked.
First of all, the amount of information that this attribute can
contain is quite big if we expect to have volumes with thousands of
bricks. Even in the most simple case of returning only an UUID, we
can easily go beyond the limit of 64KB.
Consider also, for example, what shard should return when pathinfo
is requested for a file. Probably it should return a list of shards,
each one with all its associated pathinfo. We are talking about big
amounts of data here.
I think this kind of information doesn't fit very well in an
extended attribute. Another think to consider is that most probably
the requester of the data only needs a fragment of it, so we are
generating big amounts of data only to be parsed and reduced later,
dismissing most of it.
What do you think about using a very special virtual file to manage
all this information ? it could be easily read using normal read
fops, so it could manage big amounts of data easily. Also, accessing
only to some parts of the file we could go directly where we want,
avoiding the read of all remaining data.
A very basic idea could be this:
Each xlator would have a reserved area of the file. We can reserve
up to 4GB per xlator (32 bits). The remaining 32 bits of the offset
would indicate the xlator we want to access.
At offset 0 we have generic information about the volume. One of the
the things that this information should include is a basic hierarchy
of the whole volume and the offset for each xlator.
After reading this, the user will seek to the desired offset and
read the information related to the xlator it is interested in.
All the information should be stored in a format easily extensible
that will be kept compatible even if new information is added in the
future (for example doing special mappings of the 32 bits offsets
reserved for the xlator).
For example we can reserve the first megabyte of the xlator area to
have a mapping of attributes with its respective offset.
I think that using a binary format would simplify all this a lot.
Do you think this is a way to explore or should I stop wasting time
here ?
I think this just became a very big feature :-). Shall we just live with
it the way it is now?
I supposed it...
Only thing we need to check is if shard needs to handle this xattr. If so, what it should return ? only the UUID's corresponding to the first shard or the UUID's of all bricks containing at least one shard ? I guess that the first one is enough, but just to be sure...
My proposal was to implement a new xattr, for example glusterfs.layout, that contains enough information to be usable in all current use cases.
Actually pathinfo is supposed to give this information and it already has the following format: for a 5x2 distributed-replicate volume
root@dhcp35-190 - /mnt/v3
13:38:12 :) ⚡ getfattr -n trusted.glusterfs.pathinfo d
# file: d
trusted.glusterfs.pathinfo="((<DISTRIBUTE:v3-dht> (<REPLICATE:v3-replicate-0> <POSIX(/home/gfs/v3_0):dhcp35-190.lab.eng.blr.redhat.com:/home/gfs/v3_0/d> <POSIX(/home/gfs/v3_1):dhcp35-190.lab.eng.blr.redhat.com:/home/gfs/v3_1/d>) (<REPLICATE:v3-replicate-2> <POSIX(/home/gfs/v3_5):dhcp35-190.lab.eng.blr.redhat.com:/home/gfs/v3_5/d> <POSIX(/home/gfs/v3_4):dhcp35-190.lab.eng.blr.redhat.com:/home/gfs/v3_4/d>) (<REPLICATE:v3-replicate-1> <POSIX(/home/gfs/v3_3):dhcp35-190.lab.eng.blr.redhat.com:/home/gfs/v3_3/d> <POSIX(/home/gfs/v3_2):dhcp35-190.lab.eng.blr.redhat.com:/home/gfs/v3_2/d>) (<REPLICATE:v3-replicate-4> <POSIX(/home/gfs/v3_8):dhcp35-190.lab.eng.blr.redhat.com:/home/gfs/v3_8/d> <POSIX(/home/gfs/v3_9):dhcp35-190.lab.eng.blr.redhat.com:/home/gfs/v3_9/d>) (<REPLICATE:v3-replicate-3> <POSIX(/home/gfs/v3_6):dhcp35-190.lab.eng.blr.redhat.com:/home/gfs/v3_6/d> <POSIX(/home/gfs/v3_7):dhcp35-190.lab.eng.blr.redhat.com:/home/gfs/v3_7/d>)) (v3-dht-layout (v3-replicate-0 0 858993458) (v3-replicate-1 858993459 1717986917) (v3-replicate-2 1717986918 2576980376) (v3-replicate-3 2576980377 3435973835) (v3-replicate-4 3435973836 4294967295)))"
root@dhcp35-190 - /mnt/v3
13:38:26 :) ⚡ getfattr -n trusted.glusterfs.pathinfo d/a
# file: d/a
trusted.glusterfs.pathinfo="(<DISTRIBUTE:v3-dht> (<REPLICATE:v3-replicate-1> <POSIX(/home/gfs/v3_3):dhcp35-190.lab.eng.blr.redhat.com:/home/gfs/v3_3/d/a> <POSIX(/home/gfs/v3_2):dhcp35-190.lab.eng.blr.redhat.com:/home/gfs/v3_2/d/a>))"
root@dhcp35-190 - /mnt/v3
13:38:12 :) ⚡ getfattr -n trusted.glusterfs.pathinfo d
# file: d
trusted.glusterfs.pathinfo="((<DISTRIBUTE:v3-dht> (<REPLICATE:v3-replicate-0> <POSIX(/home/gfs/v3_0):dhcp35-190.lab.eng.blr.redhat.com:/home/gfs/v3_0/d> <POSIX(/home/gfs/v3_1):dhcp35-190.lab.eng.blr.redhat.com:/home/gfs/v3_1/d>) (<REPLICATE:v3-replicate-2> <POSIX(/home/gfs/v3_5):dhcp35-190.lab.eng.blr.redhat.com:/home/gfs/v3_5/d> <POSIX(/home/gfs/v3_4):dhcp35-190.lab.eng.blr.redhat.com:/home/gfs/v3_4/d>) (<REPLICATE:v3-replicate-1> <POSIX(/home/gfs/v3_3):dhcp35-190.lab.eng.blr.redhat.com:/home/gfs/v3_3/d> <POSIX(/home/gfs/v3_2):dhcp35-190.lab.eng.blr.redhat.com:/home/gfs/v3_2/d>) (<REPLICATE:v3-replicate-4> <POSIX(/home/gfs/v3_8):dhcp35-190.lab.eng.blr.redhat.com:/home/gfs/v3_8/d> <POSIX(/home/gfs/v3_9):dhcp35-190.lab.eng.blr.redhat.com:/home/gfs/v3_9/d>) (<REPLICATE:v3-replicate-3> <POSIX(/home/gfs/v3_6):dhcp35-190.lab.eng.blr.redhat.com:/home/gfs/v3_6/d> <POSIX(/home/gfs/v3_7):dhcp35-190.lab.eng.blr.redhat.com:/home/gfs/v3_7/d>)) (v3-dht-layout (v3-replicate-0 0 858993458) (v3-replicate-1 858993459 1717986917) (v3-replicate-2 1717986918 2576980376) (v3-replicate-3 2576980377 3435973835) (v3-replicate-4 3435973836 4294967295)))"
root@dhcp35-190 - /mnt/v3
13:38:26 :) ⚡ getfattr -n trusted.glusterfs.pathinfo d/a
# file: d/a
trusted.glusterfs.pathinfo="(<DISTRIBUTE:v3-dht> (<REPLICATE:v3-replicate-1> <POSIX(/home/gfs/v3_3):dhcp35-190.lab.eng.blr.redhat.com:/home/gfs/v3_3/d/a> <POSIX(/home/gfs/v3_2):dhcp35-190.lab.eng.blr.redhat.com:/home/gfs/v3_2/d/a>))"
The idea would be that each xlator that makes a significant change in the way or the place where files are stored, should put information in this xattr. The information should include:
* Type (basically AFR, EC, DHT, ...)
* Basic configuration (replication and arbiter for AFR, data and redundancy for EC, # subvolumes for DHT, shard size for sharding, ...)
* Quorum imposed by the xlator
* UUID data comming from subvolumes (sorted by brick position)
* It should be easily extensible in the future
The last point is very important to avoid the issues we have seen now. We must be able to incorporate more information without breaking backward compatibility. To do so, we can add tags for each value.
For example, a distribute 2, replica 2 volume with 1 arbiter should be represented by this string:
DHT[dist=2,quorum=1](
AFR[rep=2,arbiter=1,quorum=2](
NODE[quorum=2,uuid=<UUID1>](<path1>),
NODE[quorum=2,uuid=<UUID2>](<path2>),
NODE[quorum=2,uuid=<UUID3>](<path3>)
),
AFR[rep=2,arbiter=1,quorum=2](
NODE[quorum=2,uuid=<UUID4>](<path4>),
NODE[quorum=2,uuid=<UUID5>](<path5>),
NODE[quorum=2,uuid=<UUID6>](<path6>)
)
)
Some explanations:
AFAIK DHT doesn't have quorum, so the default is '1'. We may decide to omit it when it's '1' for any xlator.
Quorum in AFR represents client-side enforced quorum. Quorum in NODE represents the server-side enforced quorum.
The <path> shown in each NODE represents the physical location of the file (similar to current glusterfs.pathinfo) because this xattr can be retrieved for a particular file using getxattr. This is nice, but we can remove it for now if it's difficult to implement.
We can decide to have a verbose string or try to omit some fields when not strictly necessary. For example, if there are no arbiters, we can omit the 'arbiter' tag instead of writing 'arbiter=0'. We could also implicitly compute 'dist' and 'rep' from the number of elements contained between '()'.
What do you think ?
Quite a few people are already familiar with path-info. So I am of the opinion that we give this information for that xattr itself. This xattr hasn't changed after quorum/arbiter/shard came in, so may be they should?
Xavi
Xavi
On Wed, Jun 21, 2017 at 2:08 PM, Karthik Subrahmanya
<ksubrahm@xxxxxxxxxx <mailto:ksubrahm@xxxxxxxxxx>
<mailto:ksubrahm@xxxxxxxxxx <mailto:ksubrahm@xxxxxxxxxx>>> wrote:
On Wed, Jun 21, 2017 at 1:56 PM, Xavier Hernandez
<xhernandez@xxxxxxxxxx <mailto:xhernandez@xxxxxxxxxx>
<mailto:xhernandez@xxxxxxxxxx <mailto:xhernandez@xxxxxxxxxx>>>
wrote:
That's ok. I'm currently unable to write a patch for
this on ec.
Sunil is working on this patch.
~Karthik
If no one can do it, I can try to do it in 6 - 7 hours...
Xavi
On Wednesday, June 21, 2017 09:48 CEST, Pranith Kumar
Karampuri
<pkarampu@xxxxxxxxxx <mailto:pkarampu@xxxxxxxxxx>
<mailto:pkarampu@xxxxxxxxxx <mailto:pkarampu@xxxxxxxxxx>>> wrote:
On Wed, Jun 21, 2017 at 1:00 PM, Xavier Hernandez
<xhernandez@xxxxxxxxxx
<mailto:xhernandez@xxxxxxxxxx> <mailto:xhernandez@xxxxxxxxxx
<mailto:xhernandez@xxxxxxxxxx>>> wrote:
I'm ok with reverting node-uuid content to the
previous
format and create a new xattr for the new format.
Currently, only rebalance will use it.
Only thing to consider is what can happen if we
have a
half upgraded cluster where some clients have
this change
and some not. Can rebalance work in this
situation ? if
so, could there be any issue ?
I think there shouldn't be any problem, because this is
in-memory xattr so layers below afr/ec will only see
node-uuid
xattr.
This also gives us a chance to do whatever we want
to do in
future with this xattr without any problems about
backward
compatibility.
You can check
https://review.gluster.org/#/c/17576/3/xlators/cluster/afr/s rc/afr-inode-read.c@1507
<https://review.gluster.org/#/c/17576/3/xlators/cluster/afr/ >src/afr-inode-read.c@1507
<https://review.gluster.org/#/c/17576/3/xlators/cluster/afr/ src/afr-inode-read.c@1507
<https://review.gluster.org/#/c/17576/3/xlators/cluster/afr/ >>src/afr-inode-read.c@1507
for how karthik implemented this in AFR (this got merged
accidentally yesterday, but looks like this is what
we are
settling on)
Xavi
On Wednesday, June 21, 2017 06:56 CEST, Pranith
Kumar
Karampuri <pkarampu@xxxxxxxxxx
<mailto:pkarampu@xxxxxxxxxx>
<mailto:pkarampu@xxxxxxxxxx
<mailto:pkarampu@xxxxxxxxxx>>> wrote:
On Wed, Jun 21, 2017 at 10:07 AM, Nithya
Balachandran
<nbalacha@xxxxxxxxxx
<mailto:nbalacha@xxxxxxxxxx> <mailto:nbalacha@xxxxxxxxxx
<mailto:nbalacha@xxxxxxxxxx>>> wrote:
On 20 June 2017 at 20:38, Aravinda
<avishwan@xxxxxxxxxx
<mailto:avishwan@xxxxxxxxxx> <mailto:avishwan@xxxxxxxxxx
<mailto:avishwan@xxxxxxxxxx>>> wrote:
On 06/20/2017 06:02 PM, Pranith
Kumar Karampuri
wrote:
Xavi, Aravinda and I had a
discussion on
#gluster-dev and we agreed to go
with the format
Aravinda suggested for now and
in future we
wanted some more changes for dht
to detect which
subvolume went down came back
up, at that time
we will revisit the solution
suggested by Xavi.
Susanth is doing the dht changes
Aravinda is doing geo-rep changes
Done. Geo-rep patch sent for review
https://review.gluster.org/17582
<https://review.gluster.org/17582 >
<https://review.gluster.org/17582
<https://review.gluster.org/17582 >>
The proposed changes to the node-uuid
behaviour
(while good) are going to break tiering
. Tiering
changes will take a little more time to
be coded and
tested.
As this is a regression for 3.11 and a
blocker for
3.11.1, I suggest we go back to the original
node-uuid behaviour for now so as to
unblock the
release and target the proposed changes
for the next
3.11 releases.
Let me see if I understand the changes
correctly. We are
restoring the behavior of node-uuid xattr
and adding a
new xattr for parallel rebalance for both
afr and ec,
correct? Otherwise that is one more
regression. If yes,
we will also wait for Xavi's inputs. Jeff
accidentally
merged the afr patch yesterday which does
these changes.
If everyone is in agreement, we will leave
it as is and
add similar changes in ec as well. If we are
not in
agreement, then we will let the discussion
progress :-)
Regards,
Nithya
--
Aravinda
Thanks to all of you guys for
the discussions!
On Tue, Jun 20, 2017 at 5:05 PM,
Xavier
Hernandez <xhernandez@xxxxxxxxxx
<mailto:xhernandez@xxxxxxxxxx>
<mailto:xhernandez@xxxxxxxxxx
<mailto:xhernandez@xxxxxxxxxx>>> wrote:
Hi Aravinda,
On 20/06/17 12:42, Aravinda
wrote:
I think following format
can be easily
adopted by all components
UUIDs of a subvolume are
seperated by
space and subvolumes are
separated
by comma
For example, node1 and
node2 are replica
with U1 and U2 UUIDs
respectively and
node3 and node4 are
replica with U3 and
U4 UUIDs respectively
node-uuid can return "U1
U2,U3 U4"
While this is ok for current
implementation,
I think this can be
insufficient if there
are more layers of xlators
that require to
indicate some sort of
grouping. Some
representation that can
represent hierarchy
would be better. For
example: "(U1 U2) (U3
U4)" (we can use spaces or
comma as a
separator).
Geo-rep can split by ","
and then split
by space and take first UUID
DHT can split the value
by space or
comma and get unique
UUIDs list
This doesn't solve the
problem I described
in the previous email. Some
more logic will
need to be added to avoid
more than one node
from each replica-set to be
active. If we
have some explicit hierarchy
information in
the node-uuid value, more
decisions can be
taken.
An initial proposal I made
was this:
DHT[2](AFR[2,0](NODE(U1),
NODE(U2)),
AFR[2,0](NODE(U1), NODE(U2)))
This is harder to parse, but
gives a lot of
information: DHT with 2
subvolumes, each
subvolume is an AFR with
replica 2 and no
arbiters. It's also easily
extensible with
any new xlator that changes
the layout.
However maybe this is not
the moment to do
this, and probably we could
implement this
in a new xattr with a better
name.
Xavi
Another question is
about the behavior
when a node is down,
existing
node-uuid xattr will not
return that
UUID if a node is down.
What is the
behavior with the
proposed xattr?
Let me know your thoughts.
regards
Aravinda VK
On 06/20/2017 03:06 PM,
Aravinda wrote:
Hi Xavi,
On 06/20/2017 02:51
PM, Xavier
Hernandez wrote:
Hi Aravinda,
On 20/06/17
11:05, Pranith Kumar
Karampuri wrote:
Adding more
people to get a
consensus
about this.
On Tue, Jun
20, 2017 at 1:49
PM, Aravinda
<avishwan@xxxxxxxxxx <mailto:avishwan@xxxxxxxxxx>
<mailto:avishwan@xxxxxxxxxx
<mailto:avishwan@xxxxxxxxxx>>
<mailto:avishwan@xxxxxxxxxx <mailto:avishwan@xxxxxxxxxx>
<mailto:avishwan@xxxxxxxxxx
<mailto:avishwan@xxxxxxxxxx>>>>
wrote:
regards
Aravinda VK
On
06/20/2017 01:26 PM,
Xavier
Hernandez wrote:
Hi
Pranith,
adding
gluster-devel, Kotresh and
Aravinda,
On
20/06/17 09:45,
Pranith
Kumar Karampuri wrote:
On Tue, Jun 20,
2017 at 1:12
PM, Xavier
Hernandez
<xhernandez@xxxxxxxxxx <mailto:xhernandez@xxxxxxxxxx>
<mailto:xhernandez@xxxxxxxxxx
<mailto:xhernandez@xxxxxxxxxx>>
<mailto:xhernandez@xxxxxxxxxx
<mailto:xhernandez@xxxxxxxxxx>
<mailto:xhernandez@xxxxxxxxxx
<mailto:xhernandez@xxxxxxxxxx>>>
<mailto:xhernandez@xxxxxxxxxx
<mailto:xhernandez@xxxxxxxxxx>
<mailto:xhernandez@xxxxxxxxxx
<mailto:xhernandez@xxxxxxxxxx>>
<mailto:xhernandez@xxxxxxxxxx
<mailto:xhernandez@xxxxxxxxxx>
<mailto:xhernandez@xxxxxxxxxx
<mailto:xhernandez@xxxxxxxxxx>>>>>
wrote:
On 20/06/17
09:31,
Pranith Kumar
Karampuri wrote:
The way
geo-replication works is:
On each
machine, it
does getxattr of
node-uuid and
check if its
own uuid
is
present in
the list. If it
is present
then it
will consider
it active
otherwise it
will be
considered
passive. With this
change we are
giving
all
uuids
instead of first-up
subvolume.
So all
machines think
they are
ACTIVE
which is bad
apparently. So
that is the
reason. Even I
felt bad
that we
are doing
this change.
And what
about
changing the content
of node-uuid to
include some
sort of
hierarchy ?
for example:
a single brick:
NODE(<guid>)
AFR/EC:
AFR[2](NODE(<guid>),
NODE(<guid>))
EC[3,1](NODE(<guid>),
NODE(<guid>), NODE(<guid>))
DHT:
DHT[2](AFR[2](NODE(<guid>),
NODE(<guid>)),
AFR[2](NODE(<guid>),
NODE(<guid>)))
This gives a
lot of
information that can
be used to
take the
appropriate
decisions.
I guess that is
not backward
compatible.
Shall I CC
gluster-devel and
Kotresh/Aravinda?
Is
the change we did
backward
compatible ? if we
only require
the
first field to
be a GUID to
support
backward
compatibility,
we
can use something
like this:
No. But
the necessary
change can
be made to
Geo-rep code
as well if
format
is changed, Since
all these
are built/shipped
together.
Geo-rep
uses node-id as
follows,
list =
listxattr(node-uuid)
active_node_uuids =
list.split(SPACE)
active_node_flag = True
if
self.node_id exists in
active_node_uuids
else False
How was this
case solved ?
suppose we have
three servers
and 2 bricks in
each server. A
replicated
volume is created
using the
following command:
gluster volume
create test
replica 2
server1:/brick1
server2:/brick1
server2:/brick2
server3:/brick1
server3:/brick1
server1:/brick2
In this case we
have three
replica-sets:
*
server1:/brick1 server2:/brick1
*
server2:/brick2 server3:/brick1
*
server3:/brick2 server2:/brick2
Old AFR
implementation for
node-uuid always
returned the
uuid of the
node of the
first brick, so in
this case we
will get the uuid
of the
three nodes
because all of them
are the first
brick of a
replica-set.
Does this mean
that with this
configuration
all nodes are
active ? Is
this a problem ?
Is there any
other check to
avoid this
situation if
it's not good ?
Yes all Geo-rep
workers will become
Active and
participate in syncing.
Since changelogs
will have the same
information in
replica bricks this
will lead to
duplicate syncing and
consuming network
bandwidth.
Node-uuid based
Active worker is the
default
configuration in Geo-rep
till now, Geo-rep
also has Meta
Volume based
syncronization for Active
worker using lock
files.(Can be
opted using Geo-rep
configuration,
with this config
node-uuid will not
be used)
Kotresh proposed a
solution to
configure which
worker to become
Active. This will
give more control
to Admin to choose
Active workers,
This will become default
configuration from 3.12
https://github.com/gluster/glusterfs/issues/244
<https://github.com/gluster/glusterfs/issues/244 >
<https://github.com/gluster/glusterfs/issues/244
<https://github.com/gluster/glusterfs/issues/244 >>
--
Aravinda
Xavi
Bricks:
<guid>
AFR/EC:
<guid>(<guid>, <guid>)
DHT:
<guid>(<guid>(<guid>, ...),
<guid>(<guid>, ...))
In
this case, AFR
and EC would
return the same
<guid> they
returned before the
patch, but
between '(' and
')' they put the
full
list of guid's
of all
nodes. The first
<guid> can
be used
by
geo-replication.
The list
after the first
<guid> can
be used
for
rebalance.
Not
sure if there's
any user of
node-uuid above DHT.
Xavi
Xavi
On Tue,
Jun 20, 2017
at 12:46 PM,
Xavier Hernandez
<xhernandez@xxxxxxxxxx <mailto:xhernandez@xxxxxxxxxx>
<mailto:xhernandez@xxxxxxxxxx
<mailto:xhernandez@xxxxxxxxxx>>
<mailto:xhernandez@xxxxxxxxxx
<mailto:xhernandez@xxxxxxxxxx>
<mailto:xhernandez@xxxxxxxxxx
<mailto:xhernandez@xxxxxxxxxx>>>
<mailto:xhernandez@xxxxxxxxxx
<mailto:xhernandez@xxxxxxxxxx>
<mailto:xhernandez@xxxxxxxxxx
<mailto:xhernandez@xxxxxxxxxx>>
<mailto:xhernandez@xxxxxxxxxx
<mailto:xhernandez@xxxxxxxxxx>
<mailto:xhernandez@xxxxxxxxxx
<mailto:xhernandez@xxxxxxxxxx>>>>
<mailto:xhernandez@xxxxxxxxxx
<mailto:xhernandez@xxxxxxxxxx>
<mailto:xhernandez@xxxxxxxxxx
<mailto:xhernandez@xxxxxxxxxx>>
<mailto:xhernandez@xxxxxxxxxx
<mailto:xhernandez@xxxxxxxxxx>
<mailto:xhernandez@xxxxxxxxxx
<mailto:xhernandez@xxxxxxxxxx>>>
<mailto:xhernandez@xxxxxxxxxx
<mailto:xhernandez@xxxxxxxxxx>
<mailto:xhernandez@xxxxxxxxxx
<mailto:xhernandez@xxxxxxxxxx>>
<mailto:xhernandez@xxxxxxxxxx
<mailto:xhernandez@xxxxxxxxxx>
<mailto:xhernandez@xxxxxxxxxx
<mailto:xhernandez@xxxxxxxxxx>>>>>>
wrote:
Hi
Pranith,
On
20/06/17
07:53, Pranith
Kumar Karampuri
wrote:
hi Xavi,
We
all made the
mistake of not
sending about
changing
behavior of
node-uuid
xattr so that
rebalance
can use
multiple nodes
for doing
rebalance.
Because of this
on geo-rep all
the workers
are becoming
active
instead of one per
EC/AFR
subvolume.
So we are
frantically
trying
to restore
the functionality
of node-uuid
and introduce
a new
xattr for
--
Pranith
_______________________________________________ Gluster-devel mailing list Gluster-devel@xxxxxxxxxxx http://lists.gluster.org/mailman/listinfo/gluster-devel
