Since the vast majority of our tests run without multiplexing, I'm going to start running regular runs of all tests with multiplexing turned on. You can see the patch here: https://review.gluster.org/#/c/17145/ There are currently two tests that fail with multiplexing. Note that these are all tests that passed as of when multiplexing was introduced. I don't know about these specific tests, but most tests had passed with multiplexing turned *many times* - sometimes literally over a hundred because I did more runs that that during development. These are tests that have been broken since then, because without regular tests the people making changes could not have known how their changes interact with multiplexing. 19:14:41 ./tests/bugs/glusterd/bug-1367478-volume-start-validation-after-glusterd-restart.t .. 19:14:41 not ok 17 Got "0" instead of "1", LINENUM:37 19:14:41 FAILED COMMAND: 1 brick_up_status_1 patchy1 127.1.1.2 /d/backends/2/patchy12 20:52:10 ./tests/features/trash.t .. 20:52:10 not ok 53 Got "2" instead of "1", LINENUM:221 20:52:10 FAILED COMMAND: 1 online_brick_count 20:52:10 ok 54, LINENUM:223 20:52:10 ok 55, LINENUM:226 20:52:10 not ok 56 Got "3" instead of "2", LINENUM:227 20:52:10 FAILED COMMAND: 2 online_brick_count 20:52:10 ok 57, LINENUM:228 20:52:10 ok 58, LINENUM:233 20:52:10 ok 59, LINENUM:236 20:52:10 ok 60, LINENUM:237 20:52:10 not ok 61 , LINENUM:238 20:52:10 FAILED COMMAND: [ -e /mnt/glusterfs/0/abc -a ! -e /mnt/glusterfs/0/.trashcan ] Do we have any volunteers to look into these? I looked at the first one a bit and didn't find any obvious clues; I haven't looked at the second. _______________________________________________ Gluster-devel mailing list Gluster-devel@xxxxxxxxxxx http://lists.gluster.org/mailman/listinfo/gluster-devel
