Re: Custom Transport layers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



2016-10-31 12:40 GMT+01:00 Lindsay Mathieson <lindsay.mathieson@xxxxxxxxx>:
> But you can broadcast with UDP - one packet of data through one nic to all
> nodes, so in theory you could broadcast 1GB *per nic* or 3GB via three nics.
> Minus overhead for acks, nacks and ordering :)
>
> But I'm not sure it would work at all in practice now through a switch.

I don't like this idea.
I stil prefere a properly configured bonding. There is a bonding mode
that does exactly this.
Probably, also balance-xor and active-tld could do the trick
_______________________________________________
Gluster-devel mailing list
Gluster-devel@xxxxxxxxxxx
http://www.gluster.org/mailman/listinfo/gluster-devel



[Index of Archives]     [Gluster Users]     [Ceph Users]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux