Re: Need help with https://bugzilla.redhat.com/show_bug.cgi?id=1224180

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



+gluster-devel

----- Original Message -----
> From: "Sanoj Unnikrishnan" <sunnikri@xxxxxxxxxx>
> To: "Pranith Kumar Karampuri" <pkarampu@xxxxxxxxxx>, "Ashish Pandey" <aspandey@xxxxxxxxxx>, xhernandez@xxxxxxxxxx,
> "Raghavendra Gowdappa" <rgowdapp@xxxxxxxxxx>
> Sent: Monday, September 12, 2016 7:06:59 PM
> Subject: Need help with https://bugzilla.redhat.com/show_bug.cgi?id=1224180
> 
> Hello Xavi/Pranith,
> 
> I have been able to reproduce the BZ with the following steps:
> 
> gluster volume create v_disp disperse 6 redundancy 2 $tm1:/export/sdb/br1
> $tm2:/export/sdb/b2 $tm3:/export/sdb/br3  $tm1:/export/sdb/b4
> $tm2:/export/sdb/b5 $tm3:/export/sdb/b6 force
> #(Used only 3 nodes, should not matter here)
> gluster volume start v_disp
> mount -t glusterfs $tm1:v_disp /gluster_vols/v_disp
> mkdir /gluster_vols/v_disp/dir1
> dd if=/dev/zero of=/gluster_vols/v_disp/dir1/x bs=10k count=90000 &
> gluster v quota v_disp enable
> gluster v quota v_disp limit-usage /dir1 200MB
> gluster v quota v_disp soft-timeout 0
> gluster v quota v_disp hard-timeout 0
> #optional remove 2 bricks (reproduces more often with this)
> #pgrep glusterfsd | xargs kill -9
> 
> IO error on stdout when Quota exceeds, followed by Disk Quota exceeded.
> 
> Also note the issue is seen when A flush happens simultaneous with quota
> limit hit, Hence Its not seen only on some runs.
> 
> The following are the error in logs.
> [2016-09-12 10:40:02.431568] E [MSGID: 122034]
> [ec-common.c:488:ec_child_select] 0-v_disp-disperse-0: Insufficient
> available childs for this request (have 0, need 4)
> [2016-09-12 10:40:02.431627] E [MSGID: 122037]
> [ec-common.c:1830:ec_update_size_version_done] 0-Disperse: sku-debug:
> pre-version=0/0, size=0post-version=1865/1865, size=209571840
> [2016-09-12 10:40:02.431637] E [MSGID: 122037]
> [ec-common.c:1835:ec_update_size_version_done] 0-v_disp-disperse-0: Failed
> to update version and size [Input/output error]
> [2016-09-12 10:40:02.431664] E [MSGID: 122034]
> [ec-common.c:417:ec_child_select] 0-v_disp-disperse-0: sku-debug: mask: 36,
> ec->xl_up 36, ec->node_mask 3f, parent->mask:36, fop->parent->healing:0,
> id:29
> 
> [2016-09-12 10:40:02.431673] E [MSGID: 122034]
> [ec-common.c:480:ec_child_select] 0-v_disp-disperse-0: sku-debug: mask: 36,
> remaining: 36, healing: 0, ec->xl_up 36, ec->node_mask 3f, parent->mask:36,
> num:4, minimum: 1, id:29
> 
> ...
> [2016-09-12 10:40:02.487302] W [fuse-bridge.c:2311:fuse_writev_cbk]
> 0-glusterfs-fuse: 41159: WRITE => -1
> gfid=ee0b4aa1-1f44-486a-883c-acddc13ee318 fd=0x7f1d9c003edc (Input/output
> error)
> [2016-09-12 10:40:02.500151] W [MSGID: 122006]
> [ec-combine.c:206:ec_iatt_combine] 0-v_disp-disperse-0: Failed to combine
> iatt (inode: 9816911356190712600-9816911356190712600, links: 1-1, uid: 0-0,
> gid: 0-0, rdev: 0-0, size: 52423680-52413440, mode: 100644-100644)
> [2016-09-12 10:40:02.500188] N [MSGID: 122029]
> [ec-combine.c:93:ec_combine_write] 0-v_disp-disperse-0: Mismatching iatt in
> answers of 'WRITE'
> [2016-09-12 10:40:02.504551] W [MSGID: 122006]
> [ec-combine.c:206:ec_iatt_combine] 0-v_disp-disperse-0: Failed to combine
> iatt (inode: 9816911356190712600-9816911356190712600, links: 1-1, uid: 0-0,
> gid: 0-0, rdev: 0-0, size: 52423680-52413440, mode: 100644-100644)
> ....
> ....
> 
> [2016-09-12 10:40:02.571272] N [MSGID: 122029]
> [ec-combine.c:93:ec_combine_write] 0-v_disp-disperse-0: Mismatching iatt in
> answers of 'WRITE'
> [2016-09-12 10:40:02.571510] W [MSGID: 122006]
> [ec-combine.c:206:ec_iatt_combine] 0-v_disp-disperse-0: Failed to combine
> iatt (inode: 9816911356190712600-9816911356190712600, links: 1-1, uid: 0-0,
> gid: 0-0, rdev: 0-0, size: 52423680-52413440, mode: 100644-100644)
> [2016-09-12 10:40:02.571544] N [MSGID: 122029]
> [ec-combine.c:93:ec_combine_write] 0-v_disp-disperse-0: Mismatching iatt in
> answers of 'WRITE'
> [2016-09-12 10:40:02.571772] W [fuse-bridge.c:1290:fuse_err_cbk]
> 0-glusterfs-fuse: 41160: FLUSH() ERR => -1 (Input/output error)
> 
> Also, for some fops before the write I noticed the fop->mask field as 0, Its
> not clear why this happens ??
> 
> [2016-09-12 10:40:02.431561] E [MSGID: 122034]
> [ec-common.c:480:ec_child_select] 0-v_disp-disperse-0: sku-debug: mask: 0,
> remaining: 0, healing: 0, ec->xl_up 36, ec->node_mask 3f, parent->mask:36,
> num:0, minimum: 4, fop->id:34
> [2016-09-12 10:40:02.431568] E [MSGID: 122034]
> [ec-common.c:488:ec_child_select] 0-v_disp-disperse-0: Insufficient
> available childs for this request (have 0, need 4)
> [2016-09-12 10:40:02.431637] E [MSGID: 122037]
> [ec-common.c:1835:ec_update_size_version_done] 0-v_disp-disperse-0: Failed
> to update version and size [Input/output error]
> 
> Is the zero value of fop->mask related to mismatch in iatt ?
> Any scenario of race between write/flush fop?
> please suggest how to proceed.
> 
> Thanks and Regards,
> Sanoj
> 
_______________________________________________
Gluster-devel mailing list
Gluster-devel@xxxxxxxxxxx
http://www.gluster.org/mailman/listinfo/gluster-devel



[Index of Archives]     [Gluster Users]     [Ceph Users]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux