Brick is Offline

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,


I have the setup of two boards A and B with two bricks in replica mode.

There is one test scenario

1. A acts as an active board and having the glusterfs mount point on it.
2. B acts as Passive board.
3. We are repetitively rebooting the B board (In this time period peer status on A board will be "peer in cluster (Disconnected)" and brick is not present in "gluster volume status") and when Board B comes up, starts the gluster daemon.
4. if Gluster daemon starts successfully it will make "peer in cluster(Connected)"
5. At the same with the immediate effect "gluster volume status" command should show the brick is available in online.


But in my case sometime step 5 takes immediate reflection sometime 10-15 second and sometime doesn't show brick is online even after the 1minute.

Could you please confirm why this type of unpredictable behavior is occuring. It should be reflect with immediate effect in "gluster volume status" command.
 

--
Regards
Abhishek Paliwal
_______________________________________________
Gluster-devel mailing list
Gluster-devel@xxxxxxxxxxx
http://www.gluster.org/mailman/listinfo/gluster-devel

[Index of Archives]     [Gluster Users]     [Ceph Users]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux