Re: Messup with peer status!!

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 03/15/2016 10:54 AM, ABHISHEK PALIWAL wrote:
> Hi Atin,
> 
> Is these files are ok? or you need some other files.
I just started going through the log files you shared. I've few
questions for you looking at the log:
1. Are you sure the log what you have provided from board B is post a
reboot? If you claim that a reboot wipes of /var/lib/glusterd/ then why
am I seeing that glusterd has restored value from the disk files?

2. From the content of glusterd configurations which you shared earlier
the peer UUIDs are 4bf982c0-b21b-415c-b870-e72f36c7f2e7,
4bf982c0-b21b-415c-b870-e72f36c7f2e7 002500/glusterd/peers &
c6b64e36-76da-4e98-a616-48e0e52c7006 from 000300/glusterd/peers. They
don't even exist in glusterd.log.

Somehow I have a feeling that the sequence of log and configurations
files you shared don't match!

~Atin

> 
> Regards,
> Abhishek
> 
> On Mon, Mar 14, 2016 at 6:12 PM, ABHISHEK PALIWAL
> <abhishpaliwal@xxxxxxxxx <mailto:abhishpaliwal@xxxxxxxxx>> wrote:
> 
>     You mean etc*-glusterd-*.log file from both of the boards?
> 
>     if yes please find the attachment for the same.
> 
>     On Mon, Mar 14, 2016 at 5:27 PM, Atin Mukherjee <amukherj@xxxxxxxxxx
>     <mailto:amukherj@xxxxxxxxxx>> wrote:
> 
> 
> 
>         On 03/14/2016 05:09 PM, ABHISHEK PALIWAL wrote:
>         > I am not getting you which glusterd directory you are asking. if you are
>         > asking about the /var/lib/glusterd directory then which I shared earlier
>         > is the same.
>         1. Go to /var/log/glusterfs directory
>         2. Look for glusterd log file
>         3. attach the log
>         Do it for both the boards.
>         >
>         > I have two directories related to gluster
>         >
>         > 1. /var/log/glusterfs
>         > 2./var/lib/glusterd
>         >
>         > On Mon, Mar 14, 2016 at 4:12 PM, Atin Mukherjee <amukherj@xxxxxxxxxx <mailto:amukherj@xxxxxxxxxx>
>         > <mailto:amukherj@xxxxxxxxxx <mailto:amukherj@xxxxxxxxxx>>> wrote:
>         >
>         >
>         >
>         >     On 03/14/2016 03:59 PM, ABHISHEK PALIWAL wrote:
>         >     > I have only these glusterd files available on the nodes
>         >     Look for etc-*-glusterd*.log in /var/log/glusterfs, that represents the
>         >     glusterd log file.
>         >     >
>         >     > Regards,
>         >     > Abhishek
>         >     >
>         >     > On Mon, Mar 14, 2016 at 3:43 PM, Atin Mukherjee <amukherj@xxxxxxxxxx <mailto:amukherj@xxxxxxxxxx>
>         <mailto:amukherj@xxxxxxxxxx <mailto:amukherj@xxxxxxxxxx>>
>         >     > <mailto:amukherj@xxxxxxxxxx <mailto:amukherj@xxxxxxxxxx>
>         <mailto:amukherj@xxxxxxxxxx <mailto:amukherj@xxxxxxxxxx>>>> wrote:
>         >     >
>         >     >
>         >     >
>         >     >     On 03/14/2016 02:18 PM, ABHISHEK PALIWAL wrote:
>         >     >     >
>         >     >     >
>         >     >     > On Mon, Mar 14, 2016 at 12:12 PM, Atin Mukherjee
>         <amukherj@xxxxxxxxxx <mailto:amukherj@xxxxxxxxxx>
>         <mailto:amukherj@xxxxxxxxxx <mailto:amukherj@xxxxxxxxxx>>
>         >     <mailto:amukherj@xxxxxxxxxx <mailto:amukherj@xxxxxxxxxx>
>         <mailto:amukherj@xxxxxxxxxx <mailto:amukherj@xxxxxxxxxx>>>
>         >     >     > <mailto:amukherj@xxxxxxxxxx
>         <mailto:amukherj@xxxxxxxxxx> <mailto:amukherj@xxxxxxxxxx
>         <mailto:amukherj@xxxxxxxxxx>>
>         >     <mailto:amukherj@xxxxxxxxxx <mailto:amukherj@xxxxxxxxxx>
>         <mailto:amukherj@xxxxxxxxxx <mailto:amukherj@xxxxxxxxxx>>>>> wrote:
>         >     >     >
>         >     >     >
>         >     >     >
>         >     >     >     On 03/14/2016 10:52 AM, ABHISHEK PALIWAL wrote:
>         >     >     >     > Hi Team,
>         >     >     >     >
>         >     >     >     > I am facing some issue with peer status and
>         because of
>         >     that
>         >     >     remove-brick
>         >     >     >     > on replica volume is getting failed.
>         >     >     >     >
>         >     >     >     > Here. is the scenario what I am doing with
>         gluster:
>         >     >     >     >
>         >     >     >     > 1. I have two boards A & B and gluster is
>         running on
>         >     both of
>         >     >     the boards.
>         >     >     >     > 2. On  board I have created a replicated
>         volume with one
>         >     >     brick on each
>         >     >     >     > board.
>         >     >     >     > 3. Created one glusterfs mount point where
>         both of
>         >     brick are
>         >     >     mounted.
>         >     >     >     > 4. start the volume with nfs.disable=true.
>         >     >     >     > 5. Till now everything is in sync between
>         both of bricks.
>         >     >     >     >
>         >     >     >     > Now when I manually plug-out the board B
>         from the slot and
>         >     >     plug-in it again.
>         >     >     >     >
>         >     >     >     > 1. After bootup the board B I have started
>         the glusted on
>         >     >     the board B.
>         >     >     >     >
>         >     >     >     > Following are the some gluster command
>         output on Board B
>         >     >     after the step 1.
>         >     >     >     >
>         >     >     >     > # gluster peer status
>         >     >     >     > Number of Peers: 2
>         >     >     >     >
>         >     >     >     > Hostname: 10.32.0.48
>         >     >     >     > Uuid: f4ebe3c5-b6a4-4795-98e0-732337f76faf
>         >     >     >     > State: Accepted peer request (Connected)
>         >     >     >     >
>         >     >     >     > Hostname: 10.32.0.48
>         >     >     >     > Uuid: 4bf982c0-b21b-415c-b870-e72f36c7f2e7
>         >     >     >     > State: Peer is connected and Accepted
>         (Connected)
>         >     >     >     >
>         >     >     >     > Why this peer status is showing two peer with
>         >     different UUID?
>         >     >     >     GlusterD doesn't generate a new UUID on init
>         if it has
>         >     already
>         >     >     generated
>         >     >     >     an UUID earlier. This clearly indicates that
>         on reboot
>         >     of board B
>         >     >     >     content of /var/lib/glusterd were wiped off.
>         I've asked this
>         >     >     question to
>         >     >     >     you multiple times that is it the case?
>         >     >     >
>         >     >     >
>         >     >     > Yes I am following the same which is mentioned in
>         the link:
>         >     >     >
>         >     >     >
>         >     >
>         >     
>         http://www.gluster.org/community/documentation/index.php/Resolving_Peer_Rejected
>         >     >     >
>         >     >     > but why it is showing two peer enteries?
>         >     >     >
>         >     >     >     >
>         >     >     >     > # gluster volume info
>         >     >     >     >
>         >     >     >     > Volume Name: c_glusterfs
>         >     >     >     > Type: Replicate
>         >     >     >     > Volume ID: c11f1f13-64a0-4aca-98b5-91d609a4a18d
>         >     >     >     > Status: Started
>         >     >     >     > Number of Bricks: 1 x 2 = 2
>         >     >     >     > Transport-type: tcp
>         >     >     >     > Bricks:
>         >     >     >     > Brick1: 10.32.0.48:/opt/lvmdir/c2/brick
>         >     >     >     > Brick2: 10.32.1.144:/opt/lvmdir/c2/brick
>         >     >     >     > Options Reconfigured:
>         >     >     >     > performance.readdir-ahead: on
>         >     >     >     > network.ping-timeout: 4
>         >     >     >     > nfs.disable: on
>         >     >     >     > # gluster volume heal c_glusterfs info
>         >     >     >     > c_glusterfs: Not able to fetch volfile from
>         glusterd
>         >     >     >     > Volume heal failed.
>         >     >     >     > # gluster volume status c_glusterfs
>         >     >     >     > Status of volume: c_glusterfs
>         >     >     >     > Gluster process                           
>          TCP Port
>         >     RDMA Port
>         >     >     >     Online
>         >     >     >     > Pid
>         >     >     >     >
>         >     >     >
>         >     >
>         >   
>          ------------------------------------------------------------------------------
>         >     >     >     >
>         >     >     >     > Brick 10.32.1.144:/opt/lvmdir/c2/brick     
>         N/A       N/A
>         >     >         N
>         >     >     >     > N/A
>         >     >     >     > Self-heal Daemon on localhost             
>          N/A       N/A
>         >     >         Y
>         >     >     >     > 3922
>         >     >     >     >
>         >     >     >     > Task Status of Volume c_glusterfs
>         >     >     >     >
>         >     >     >
>         >     >
>         >   
>          ------------------------------------------------------------------------------
>         >     >     >     >
>         >     >     >     > There are no active volume tasks
>         >     >     >     > --
>         >     >     >     >
>         >     >     >     > At the same time Board A have the following
>         gluster
>         >     commands
>         >     >     outcome:
>         >     >     >     >
>         >     >     >     > # gluster peer status
>         >     >     >     > Number of Peers: 1
>         >     >     >     >
>         >     >     >     > Hostname: 10.32.1.144
>         >     >     >     > Uuid: c6b64e36-76da-4e98-a616-48e0e52c7006
>         >     >     >     > State: Peer in Cluster (Connected)
>         >     >     >     >
>         >     >     >     > Why it is showing the older UUID of host
>         10.32.1.144
>         >     when this
>         >     >     >     UUID has
>         >     >     >     > been changed and new UUID is
>         >     >     267a92c3-fd28-4811-903c-c1d54854bda9
>         >     >     >     >
>         >     >     >     >
>         >     >     >     > # gluster volume heal c_glusterfs info
>         >     >     >     > c_glusterfs: Not able to fetch volfile from
>         glusterd
>         >     >     >     > Volume heal failed.
>         >     >     >     > # gluster volume status c_glusterfs
>         >     >     >     > Status of volume: c_glusterfs
>         >     >     >     > Gluster process                           
>          TCP Port
>         >     RDMA Port
>         >     >     >     Online
>         >     >     >     > Pid
>         >     >     >     >
>         >     >     >
>         >     >
>         >   
>          ------------------------------------------------------------------------------
>         >     >     >     >
>         >     >     >     > Brick 10.32.0.48:/opt/lvmdir/c2/brick     
>          49169     0
>         >     >         Y
>         >     >     >     > 2427
>         >     >     >     > Brick 10.32.1.144:/opt/lvmdir/c2/brick     
>         N/A       N/A
>         >     >         N
>         >     >     >     > N/A
>         >     >     >     > Self-heal Daemon on localhost             
>          N/A       N/A
>         >     >         Y
>         >     >     >     > 3388
>         >     >     >     > Self-heal Daemon on 10.32.1.144           
>          N/A       N/A
>         >     >         Y
>         >     >     >     > 3922
>         >     >     >     >
>         >     >     >     > Task Status of Volume c_glusterfs
>         >     >     >     >
>         >     >     >
>         >     >
>         >   
>          ------------------------------------------------------------------------------
>         >     >     >     >
>         >     >     >     > There are no active volume tasks
>         >     >     >     >
>         >     >     >     > As you see in the "gluster volume status"
>         showing that
>         >     Brick
>         >     >     >     > "10.32.1.144:/opt/lvmdir/c2/brick " is
>         offline so We have
>         >     >     tried to
>         >     >     >     > remove it but getting "volume remove-brick
>         c_glusterfs
>         >     replica 1
>         >     >     >     > 10.32.1.144:/opt/lvmdir/c2/brick force :
>         FAILED :
>         >     Incorrect
>         >     >     brick
>         >     >     >     > 10.32.1.144:/opt/lvmdir/c2/brick for volume
>         c_glusterfs"
>         >     >     error on the
>         >     >     >     > Board A.
>         >     >     >     >
>         >     >     >     > Please reply on this post because I am
>         always getting
>         >     this error
>         >     >     >     in this
>         >     >     >     > scenario.
>         >     >     >     >
>         >     >     >     > For more detail I am also adding the logs of
>         both of the
>         >     >     board which
>         >     >     >     > having some manual created file in which you
>         can find the
>         >     >     output of
>         >     >     >     > glulster command from both of the boards
>         >     >     >     >
>         >     >     >     > in logs
>         >     >     >     > 00030 is board A
>         >     >     >     > 00250 is board B.
>         >     >     >     This attachment doesn't help much. Could you
>         attach full
>         >     >     glusterd log
>         >     >     >     files from both the nodes?
>         >     >     >     >
>         >     >     >
>         >     >     > inside this attachment you will found full
>         glusterd log file
>         >     >     > 00300/glusterd/ and 002500/glusterd/
>         >     >     No, that contains the configuration files.
>         >     >     >
>         >     >     >     > Thanks in advance waiting for the reply.
>         >     >     >     >
>         >     >     >     > Regards,
>         >     >     >     > Abhishek
>         >     >     >     >
>         >     >     >     >
>         >     >     >     > Regards
>         >     >     >     > Abhishek Paliwal
>         >     >     >     >
>         >     >     >     >
>         >     >     >     > _______________________________________________
>         >     >     >     > Gluster-devel mailing list
>         >     >     >     > Gluster-devel@xxxxxxxxxxx
>         <mailto:Gluster-devel@xxxxxxxxxxx>
>         >     <mailto:Gluster-devel@xxxxxxxxxxx
>         <mailto:Gluster-devel@xxxxxxxxxxx>>
>         <mailto:Gluster-devel@xxxxxxxxxxx <mailto:Gluster-devel@xxxxxxxxxxx>
>         >     <mailto:Gluster-devel@xxxxxxxxxxx
>         <mailto:Gluster-devel@xxxxxxxxxxx>>>
>         >     >     <mailto:Gluster-devel@xxxxxxxxxxx
>         <mailto:Gluster-devel@xxxxxxxxxxx>
>         >     <mailto:Gluster-devel@xxxxxxxxxxx
>         <mailto:Gluster-devel@xxxxxxxxxxx>>
>         <mailto:Gluster-devel@xxxxxxxxxxx <mailto:Gluster-devel@xxxxxxxxxxx>
>         >     <mailto:Gluster-devel@xxxxxxxxxxx
>         <mailto:Gluster-devel@xxxxxxxxxxx>>>>
>         >     >     >     >
>         http://www.gluster.org/mailman/listinfo/gluster-devel
>         >     >     >     >
>         >     >     >
>         >     >     >
>         >     >     >
>         >     >     >
>         >     >     > --
>         >     >     >
>         >     >     >
>         >     >     >
>         >     >     >
>         >     >     > Regards
>         >     >     > Abhishek Paliwal
>         >     >
>         >     >
>         >     >
>         >     >
>         >     > --
>         >     >
>         >     >
>         >     >
>         >     >
>         >     > Regards
>         >     > Abhishek Paliwal
>         >
>         >
>         >
>         >
>         > --
>         >
>         >
>         >
>         >
>         > Regards
>         > Abhishek Paliwal
> 
> 
> 
> 
>     -- 
> 
> 
> 
> 
>     Regards
>     Abhishek Paliwal
> 
> 
> 
> 
> -- 
> 
> 
> 
> 
> Regards
> Abhishek Paliwal
_______________________________________________
Gluster-devel mailing list
Gluster-devel@xxxxxxxxxxx
http://www.gluster.org/mailman/listinfo/gluster-devel



[Index of Archives]     [Gluster Users]     [Ceph Users]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux