Re: [Gluster-users] GlusterFS FUSE client hangs on rsyncing lots of file

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



the client statedump is at http://pastebin.centos.org/38671/

On Mon, Jan 25, 2016 at 3:33 PM, baul jianguo <roidinev@xxxxxxxxx> wrote:
> 3.5.7 also hangs.only the flush op hung. Yes,off the
> performance.client-io-threads ,no hang.
>
> The hang does not relate the client kernel version.
>
> One client statdump about flush op,any abnormal?
>
> [global.callpool.stack.12]
>
> uid=0
>
> gid=0
>
> pid=14432
>
> unique=16336007098
>
> lk-owner=77cb199aa36f3641
>
> op=FLUSH
>
> type=1
>
> cnt=6
>
>
>
> [global.callpool.stack.12.frame.1]
>
> ref_count=1
>
> translator=fuse
>
> complete=0
>
>
>
> [global.callpool.stack.12.frame.2]
>
> ref_count=0
>
> translator=datavolume-write-behind
>
> complete=0
>
> parent=datavolume-read-ahead
>
> wind_from=ra_flush
>
> wind_to=FIRST_CHILD (this)->fops->flush
>
> unwind_to=ra_flush_cbk
>
>
>
> [global.callpool.stack.12.frame.3]
>
> ref_count=1
>
> translator=datavolume-read-ahead
>
> complete=0
>
> parent=datavolume-open-behind
>
> wind_from=default_flush_resume
>
> wind_to=FIRST_CHILD(this)->fops->flush
>
> unwind_to=default_flush_cbk
>
>
>
> [global.callpool.stack.12.frame.4]
>
> ref_count=1
>
> translator=datavolume-open-behind
>
> complete=0
>
> parent=datavolume-io-threads
>
> wind_from=iot_flush_wrapper
>
> wind_to=FIRST_CHILD(this)->fops->flush
>
> unwind_to=iot_flush_cbk
>
>
>
> [global.callpool.stack.12.frame.5]
>
> ref_count=1
>
> translator=datavolume-io-threads
>
> complete=0
>
> parent=datavolume
>
> wind_from=io_stats_flush
>
> wind_to=FIRST_CHILD(this)->fops->flush
>
> unwind_to=io_stats_flush_cbk
>
>
>
> [global.callpool.stack.12.frame.6]
>
> ref_count=1
>
> translator=datavolume
>
> complete=0
>
> parent=fuse
>
> wind_from=fuse_flush_resume
>
> wind_to=xl->fops->flush
>
> unwind_to=fuse_err_cbk
>
>
>
> On Sun, Jan 24, 2016 at 5:35 AM, Oleksandr Natalenko
> <oleksandr@xxxxxxxxxxxxxx> wrote:
>> With "performance.client-io-threads" set to "off" no hangs occurred in 3
>> rsync/rm rounds. Could that be some fuse-bridge lock race? Will bring that
>> option to "on" back again and try to get full statedump.
>>
>> On четвер, 21 січня 2016 р. 14:54:47 EET Raghavendra G wrote:
>>> On Thu, Jan 21, 2016 at 10:49 AM, Pranith Kumar Karampuri <
>>>
>>> pkarampu@xxxxxxxxxx> wrote:
>>> > On 01/18/2016 02:28 PM, Oleksandr Natalenko wrote:
>>> >> XFS. Server side works OK, I'm able to mount volume again. Brick is 30%
>>> >> full.
>>> >
>>> > Oleksandr,
>>> >
>>> >       Will it be possible to get the statedump of the client, bricks
>>> >
>>> > output next time it happens?
>>> >
>>> > https://github.com/gluster/glusterfs/blob/master/doc/debugging/statedump.m
>>> > d#how-to-generate-statedump
>>> We also need to dump inode information. To do that you've to add "all=yes"
>>> to /var/run/gluster/glusterdump.options before you issue commands to get
>>> statedump.
>>>
>>> > Pranith
>>> >
>>> >> On понеділок, 18 січня 2016 р. 15:07:18 EET baul jianguo wrote:
>>> >>> What is your brick file system? and the glusterfsd process and all
>>> >>> thread status?
>>> >>> I met same issue when client app such as rsync stay in D status,and
>>> >>> the brick process and relate thread also be in the D status.
>>> >>> And the brick dev disk util is 100% .
>>> >>>
>>> >>> On Sun, Jan 17, 2016 at 6:13 AM, Oleksandr Natalenko
>>> >>>
>>> >>> <oleksandr@xxxxxxxxxxxxxx> wrote:
>>> >>>> Wrong assumption, rsync hung again.
>>> >>>>
>>> >>>> On субота, 16 січня 2016 р. 22:53:04 EET Oleksandr Natalenko wrote:
>>> >>>>> One possible reason:
>>> >>>>>
>>> >>>>> cluster.lookup-optimize: on
>>> >>>>> cluster.readdir-optimize: on
>>> >>>>>
>>> >>>>> I've disabled both optimizations, and at least as of now rsync still
>>> >>>>> does
>>> >>>>> its job with no issues. I would like to find out what option causes
>>> >>>>> such
>>> >>>>> a
>>> >>>>> behavior and why. Will test more.
>>> >>>>>
>>> >>>>> On пʼятниця, 15 січня 2016 р. 16:09:51 EET Oleksandr Natalenko wrote:
>>> >>>>>> Another observation: if rsyncing is resumed after hang, rsync itself
>>> >>>>>> hangs a lot faster because it does stat of already copied files. So,
>>> >>>>>> the
>>> >>>>>> reason may be not writing itself, but massive stat on GlusterFS
>>> >>>>>> volume
>>> >>>>>> as well.
>>> >>>>>>
>>> >>>>>> 15.01.2016 09:40, Oleksandr Natalenko написав:
>>> >>>>>>> While doing rsync over millions of files from ordinary partition to
>>> >>>>>>> GlusterFS volume, just after approx. first 2 million rsync hang
>>> >>>>>>> happens, and the following info appears in dmesg:
>>> >>>>>>>
>>> >>>>>>> ===
>>> >>>>>>> [17075038.924481] INFO: task rsync:10310 blocked for more than 120
>>> >>>>>>> seconds.
>>> >>>>>>> [17075038.931948] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
>>> >>>>>>> disables this message.
>>> >>>>>>> [17075038.940748] rsync           D ffff88207fc13680     0 10310
>>> >>>>>>> 10309 0x00000080
>>> >>>>>>> [17075038.940752]  ffff8809c578be18 0000000000000086
>>> >>>>>>> ffff8809c578bfd8
>>> >>>>>>> 0000000000013680
>>> >>>>>>> [17075038.940756]  ffff8809c578bfd8 0000000000013680
>>> >>>>>>> ffff880310cbe660
>>> >>>>>>> ffff881159d16a30
>>> >>>>>>> [17075038.940759]  ffff881e3aa25800 ffff8809c578be48
>>> >>>>>>> ffff881159d16b10
>>> >>>>>>> ffff88087d553980
>>> >>>>>>> [17075038.940762] Call Trace:
>>> >>>>>>> [17075038.940770]  [<ffffffff8160a1d9>] schedule+0x29/0x70
>>> >>>>>>> [17075038.940797]  [<ffffffffa023a53d>]
>>> >>>>>>> __fuse_request_send+0x13d/0x2c0
>>> >>>>>>> [fuse]
>>> >>>>>>> [17075038.940801]  [<ffffffffa023db30>] ?
>>> >>>>>>> fuse_get_req_nofail_nopages+0xc0/0x1e0 [fuse]
>>> >>>>>>> [17075038.940805]  [<ffffffff81098350>] ? wake_up_bit+0x30/0x30
>>> >>>>>>> [17075038.940809]  [<ffffffffa023a6d2>] fuse_request_send+0x12/0x20
>>> >>>>>>> [fuse]
>>> >>>>>>> [17075038.940813]  [<ffffffffa024382f>] fuse_flush+0xff/0x150 [fuse]
>>> >>>>>>> [17075038.940817]  [<ffffffff811c45c4>] filp_close+0x34/0x80
>>> >>>>>>> [17075038.940821]  [<ffffffff811e4ed8>] __close_fd+0x78/0xa0
>>> >>>>>>> [17075038.940824]  [<ffffffff811c6103>] SyS_close+0x23/0x50
>>> >>>>>>> [17075038.940828]  [<ffffffff81614de9>]
>>> >>>>>>> system_call_fastpath+0x16/0x1b
>>> >>>>>>> ===
>>> >>>>>>>
>>> >>>>>>> rsync blocks in D state, and to kill it, I have to do umount --lazy
>>> >>>>>>> on
>>> >>>>>>> GlusterFS mountpoint, and then kill corresponding client glusterfs
>>> >>>>>>> process. Then rsync exits.
>>> >>>>>>>
>>> >>>>>>> Here is GlusterFS volume info:
>>> >>>>>>>
>>> >>>>>>> ===
>>> >>>>>>> Volume Name: asterisk_records
>>> >>>>>>> Type: Distributed-Replicate
>>> >>>>>>> Volume ID: dc1fe561-fa3a-4f2e-8330-ec7e52c75ba4
>>> >>>>>>> Status: Started
>>> >>>>>>> Number of Bricks: 3 x 2 = 6
>>> >>>>>>> Transport-type: tcp
>>> >>>>>>> Bricks:
>>> >>>>>>> Brick1:
>>> >>>>>>> server1:/bricks/10_megaraid_0_3_9_x_0_4_3_hdd_r1_nolvm_hdd_storage_0
>>> >>>>>>> 1
>>> >>>>>>> /as
>>> >>>>>>> te
>>> >>>>>>> risk/records Brick2:
>>> >>>>>>> server2:/bricks/10_megaraid_8_5_14_x_8_6_16_hdd_r1_nolvm_hdd_storage
>>> >>>>>>> _
>>> >>>>>>> 01/
>>> >>>>>>> as
>>> >>>>>>> terisk/records Brick3:
>>> >>>>>>> server1:/bricks/11_megaraid_0_5_4_x_0_6_5_hdd_r1_nolvm_hdd_storage_0
>>> >>>>>>> 2
>>> >>>>>>> /as
>>> >>>>>>> te
>>> >>>>>>> risk/records Brick4:
>>> >>>>>>> server2:/bricks/11_megaraid_8_7_15_x_8_8_20_hdd_r1_nolvm_hdd_storage
>>> >>>>>>> _
>>> >>>>>>> 02/
>>> >>>>>>> as
>>> >>>>>>> terisk/records Brick5:
>>> >>>>>>> server1:/bricks/12_megaraid_0_7_6_x_0_13_14_hdd_r1_nolvm_hdd_storage
>>> >>>>>>> _
>>> >>>>>>> 03/
>>> >>>>>>> as
>>> >>>>>>> terisk/records Brick6:
>>> >>>>>>> server2:/bricks/12_megaraid_8_9_19_x_8_13_24_hdd_r1_nolvm_hdd_storag
>>> >>>>>>> e
>>> >>>>>>> _03
>>> >>>>>>> /a
>>> >>>>>>> sterisk/records Options Reconfigured:
>>> >>>>>>> cluster.lookup-optimize: on
>>> >>>>>>> cluster.readdir-optimize: on
>>> >>>>>>> client.event-threads: 2
>>> >>>>>>> network.inode-lru-limit: 4096
>>> >>>>>>> server.event-threads: 4
>>> >>>>>>> performance.client-io-threads: on
>>> >>>>>>> storage.linux-aio: on
>>> >>>>>>> performance.write-behind-window-size: 4194304
>>> >>>>>>> performance.stat-prefetch: on
>>> >>>>>>> performance.quick-read: on
>>> >>>>>>> performance.read-ahead: on
>>> >>>>>>> performance.flush-behind: on
>>> >>>>>>> performance.write-behind: on
>>> >>>>>>> performance.io-thread-count: 2
>>> >>>>>>> performance.cache-max-file-size: 1048576
>>> >>>>>>> performance.cache-size: 33554432
>>> >>>>>>> features.cache-invalidation: on
>>> >>>>>>> performance.readdir-ahead: on
>>> >>>>>>> ===
>>> >>>>>>>
>>> >>>>>>> The issue reproduces each time I rsync such an amount of files.
>>> >>>>>>>
>>> >>>>>>> How could I debug this issue better?
>>> >>>>>>> _______________________________________________
>>> >>>>>>> Gluster-users mailing list
>>> >>>>>>> Gluster-users@xxxxxxxxxxx
>>> >>>>>>> http://www.gluster.org/mailman/listinfo/gluster-users
>>> >>>>>>
>>> >>>>>> _______________________________________________
>>> >>>>>> Gluster-devel mailing list
>>> >>>>>> Gluster-devel@xxxxxxxxxxx
>>> >>>>>> http://www.gluster.org/mailman/listinfo/gluster-devel
>>> >>>>>
>>> >>>>> _______________________________________________
>>> >>>>> Gluster-devel mailing list
>>> >>>>> Gluster-devel@xxxxxxxxxxx
>>> >>>>> http://www.gluster.org/mailman/listinfo/gluster-devel
>>> >>>>
>>> >>>> _______________________________________________
>>> >>>> Gluster-devel mailing list
>>> >>>> Gluster-devel@xxxxxxxxxxx
>>> >>>> http://www.gluster.org/mailman/listinfo/gluster-devel
>>> >>
>>> >> _______________________________________________
>>> >> Gluster-users mailing list
>>> >> Gluster-users@xxxxxxxxxxx
>>> >> http://www.gluster.org/mailman/listinfo/gluster-users
>>> >
>>> > _______________________________________________
>>> > Gluster-devel mailing list
>>> > Gluster-devel@xxxxxxxxxxx
>>> > http://www.gluster.org/mailman/listinfo/gluster-devel
>>
>>
_______________________________________________
Gluster-devel mailing list
Gluster-devel@xxxxxxxxxxx
http://www.gluster.org/mailman/listinfo/gluster-devel




[Index of Archives]     [Gluster Users]     [Ceph Users]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux