On Thu, Dec 03, 2015 at 03:26:27PM +0100, Niels de Vos wrote: > On Wed, Dec 02, 2015 at 08:26:45PM -0500, Paul Moore wrote: > > On Wednesday, December 02, 2015 01:02:00 PM Niels de Vos wrote: > > > Hi, > > > > > > At the moment it is not possible to set an SElinux context over a FUSE > > > mount. This is because FUSE (in the kernel) does not support SElinux. > > > I'll try to explain what we need to accomplish to get this working. > > > > > > 1. make it possible for SElinux to check sub-filesystems > > > > > > Currently SElinux only can check if a filesystem supports SElinux, > > > based on the base filesystem. By default FUSE does not support > > > SElinux, so it is not possible for sub-filesystems to support it > > > either. When checking /proc/mounts a Gluster mount identifies itself > > > with "fuse.glusterfs", which is <mainfs>.<subfs>. > > > > > > An experimental patch for the kernel has been attached to > > > https://bugzilla.redhat.com/1272868 > > > > I'm not very knowledgeable about gluster so I don't have much constructive to > > say about any of the points below, and my comments in the BZ above are still > > valid. I will say that I didn't have much luck getting a response from Eric, > > but I don't think that should stop anything at this point; if the gluster > > folks are okay with everything else, I have no problems with the proposed > > SELinux kernel bits (that weren't already mentioned in the BZ). > > The approach looks good, but did not have any success with our testing > yet. The patch applied and running with the test-kernel does not make it > possible yet to change the SElinux context with "chcon". Even mounting > with the additional "seclabel" mount option does not help with that (but > it looks like a no-op in the kernel sources anyway). > > # chcon -t home_user_t /mnt/README > chcon: failed to change context of ‘/mnt/README’ to ‘system_u:object_r:home_user_t:s0’: Operation not supported > > Systemtap shows that the subtype is set correctly in the super_block at > the time selinux_sb_kern_mount() is called. I'm not sure what else is > needed to make this work. A suggestion what to check from a SElinux side > is welcome. The audit.log does not contain anything relevant at the time > of the mounting, maybe there is a way to enable more verbose logging of > some kind? > I believe fuse modifications are required to enable SELinux support via xattrs. I had posted some prototype patches a ways back: http://sourceforge.net/p/fuse/mailman/fuse-devel/thread/1385389343-55663-1-git-send-email-bfoster%40redhat.com/#msg31678712 These patches basically add the ability for the userspace fs to enable selinux in fuse, add the hooks for fuse to initialize security properly on new inodes (fairly boilerplate if you take a look at some other linux fs'), and add a notification mechanism to help userspace invalidate the security context on remote context changes. IIRC, the latter is required since otherwise the security context is initialized on the in-memory inode once and never changed except via the explicit chcon (setxattr?) path. Therefore, client A doesn't have any clean way to notify the local kernel that the backend security context has changed via a chcon on client B. I also think an selinux policy update that enables selinux via xattrs support for "fuse.glusterfs" filesystems is a requirement to actually test any of this stuff. My understanding is that the kernel subtype thing is a requirement to distinguish glusterfs from other types of fuse filesystems, but the actual policy enablement for such fuse.glusterfs fs' is part of the userspace selinux-policy package. I have old, custom selinux-policy-3.12.1-95.fc21 rpm packages sitting around here that you're welcome to, but they might be too old at this point. I also might have prototype-level supporting code in glusterfs for some of this stuff (e.g., xattr name translation, remote context invalidation, etc.), but I'd have to dig around for that... Brian > # stap vfs_kern_mount_subtype.stp > Beginning probe, press CTRL+C to exit... > vfs_kern_mount_subtype with subtype=glusterfs > mount_fs with type=fuse, subtype=glusterfs > security_sb_kern_mount with type=fuse, subtype=glusterfs > selinux_sb_kern_mount with type=fuse, subtype=glusterfs > selinux_parse_opts_str with options=seclabel > > > I've attached the systemtap script for reference. > > Thanks, > Niels > #!/usr/bin/stap > # > # Script to help with investigation and debugging of the kernel patch posted at > # https://bugzilla.redhat.com/1272868 > # > # This systemtap script will only work against a kernel that has the test-patch > # applied, otherwise you will get errors about unresolvable functions (most > # likely vfs_kern_mount_subtype). > # > > probe begin > { > printf("Beginning probe, press CTRL+C to exit...\n"); > } > > probe kernel.function("vfs_kern_mount_subtype") > { > printf("vfs_kern_mount_subtype with subtype=%s\n", > kernel_string($subtype)); > } > > probe kernel.function("mount_fs") > { > printf("mount_fs with type=%s, subtype=%s\n", > kernel_string($type->name), kernel_string($subtype)); > } > > probe kernel.function("security_sb_kern_mount"), > kernel.function("selinux_sb_kern_mount") > { > printf("%s with type=%s, subtype=%s\n", probefunc(), > kernel_string($sb->s_type->name), > kernel_string($sb->s_subtype)); > } > > probe kernel.function("selinux_parse_opts_str") > { > printf("selinux_parse_opts_str with options=%s\n", > kernel_string($options)); > } _______________________________________________ Gluster-devel mailing list Gluster-devel@xxxxxxxxxxx http://www.gluster.org/mailman/listinfo/gluster-devel
