On Sat, May 30, 2015 at 06:57:41AM +0530, Pranith Kumar Karampuri wrote: > hi, > I don't understand rpmbuild logs that well. But the following seems to > be the issue: > Start: build phase for glusterfs-3.8dev-0.314.git471b2e0.el6.src.rpm > Start: build setup for glusterfs-3.8dev-0.314.git471b2e0.el6.src.rpm > Finish: build setup for glusterfs-3.8dev-0.314.git471b2e0.el6.src.rpm > Start: rpmbuild glusterfs-3.8dev-0.314.git471b2e0.el6.src.rpm > ERROR: Exception(glusterfs-3.8dev-0.314.git471b2e0.el6.src.rpm) > Config(epel-6-x86_64) 1 minutes 5 seconds > > Please feel free to take a look at the following links for sample runs: > http://build.gluster.org/job/glusterfs-devrpms-el6/9019/console > http://build.gluster.org/job/glusterfs-devrpms/9141/console > http://build.gluster.org/job/glusterfs-devrpms-el7/2179/console In case you have a glusterfs-devrpms* job fail, you can find the full logs of the build as an "artifact". Steps to find it with the last link you gave: - open http://build.gluster.org/job/glusterfs-devrpms-el7/2179/console - click "Status" in the left menu - click "build.log" under the "Build Artifacts" - scroll to the bottom of the log and find your error Niels _______________________________________________ Gluster-devel mailing list Gluster-devel@xxxxxxxxxxx http://www.gluster.org/mailman/listinfo/gluster-devel
