Spurious failure in ./tests/basic/mgmt_v3-locks.t [11, 12, 13]

[Pranith Kumar Karampuri <pkarampu@xxxxxxxxxx>]

hi Avra,
      Could you please look into it.
      
Patch                     ==> http://review.gluster.com/6652/5
Author                    ==>  Varun Shastry vshastry@xxxxxxxxxx
Build triggered by        ==> amarts
Build-url                 ==> http://build.gluster.org/job/regression/4588/consoleFull
Download-log-at           ==> http://build.gluster.org:443/logs/regression/glusterfs-logs-20140527:17:31:44.tgz
Test written by           ==> Author: Avra Sengupta <asengupt@xxxxxxxxxx>

./tests/basic/mgmt_v3-locks.t [11, 12, 13]
      #!/bin/bash
      
      . $(dirname $0)/../include.rc
      . $(dirname $0)/../cluster.rc
      
      function check_peers {
              $CLI_1 peer status | grep 'Peer in Cluster (Connected)' | wc -l
      }
      
      function volume_count {
              local cli=$1;
              if [ $cli -eq '1' ] ; then
                      $CLI_1 volume info | grep 'Volume Name' | wc -l;
              else
                      $CLI_2 volume info | grep 'Volume Name' | wc -l;
              fi
      }
      
      function volinfo_field()
      {
          local vol=$1;
          local field=$2;
      
          $CLI_1 volume info $vol | grep "^$field: " | sed 's/.*: //';
      }
      
      function two_diff_vols_create {
              # Both volume creates should be successful
              $CLI_1 volume create $V0 $H1:$B1/$V0 $H2:$B2/$V0 $H3:$B3/$V0 &
              PID_1=$!
      
              $CLI_2 volume create $V1 $H1:$B1/$V1 $H2:$B2/$V1 $H3:$B3/$V1 &
              PID_2=$!
      
              wait $PID_1 $PID_2
      }
      
      function two_diff_vols_start {
              # Both volume starts should be successful
              $CLI_1 volume start $V0 &
              PID_1=$!
      
              $CLI_2 volume start $V1 &
              PID_2=$!
      
              wait $PID_1 $PID_2
      }
      
      function two_diff_vols_stop_force {
              # Force stop, so that if rebalance from the
              # remove bricks is in progress, stop can
              # still go ahead. Both volume stops should
              # be successful
              $CLI_1 volume stop $V0 force &
              PID_1=$!
      
              $CLI_2 volume stop $V1 force &
              PID_2=$!
      
              wait $PID_1 $PID_2
      }
      
      function same_vol_remove_brick {
      
              # Running two same vol commands at the same time can result in
              # two success', two failures, or one success and one failure, all
              # of which are valid. The only thing that shouldn't happen is a
              # glusterd crash.
      
              local vol=$1
              local brick=$2
              $CLI_1 volume remove-brick $1 $2 start &
              $CLI_2 volume remove-brick $1 $2 start
      }
      
      cleanup;
      
    1 TEST launch_cluster 3;
    2 TEST $CLI_1 peer probe $H2;
    3 TEST $CLI_1 peer probe $H3;
      
    4 EXPECT_WITHIN $PROBE_TIMEOUT 2 check_peers
      
      two_diff_vols_create
    5 EXPECT 'Created' volinfo_field $V0 'Status';
    6 EXPECT 'Created' volinfo_field $V1 'Status';
      
      two_diff_vols_start
    7 EXPECT 'Started' volinfo_field $V0 'Status';
    8 EXPECT 'Started' volinfo_field $V1 'Status';
      
      same_vol_remove_brick $V0 $H2:$B2/$V0
      # Checking glusterd crashed or not after same volume remove brick
      # on both nodes.
    9 EXPECT_WITHIN $PROBE_TIMEOUT 2 check_peers
      
      same_vol_remove_brick $V1 $H2:$B2/$V1
      # Checking glusterd crashed or not after same volume remove brick
      # on both nodes.
   10 EXPECT_WITHIN $PROBE_TIMEOUT 2 check_peers
      
      $CLI_1 volume set $V0 diagnostics.client-log-level DEBUG &
      $CLI_1 volume set $V1 diagnostics.client-log-level DEBUG
      kill_glusterd 3
      $CLI_1 volume status $V0
      $CLI_2 volume status $V1
      $CLI_1 peer status
***11 EXPECT_WITHIN $PROBE_TIMEOUT 1 check_peers
***12 EXPECT 'Started' volinfo_field $V0 'Status';
***13 EXPECT 'Started' volinfo_field $V1 'Status';
      
   14 TEST $glusterd_3
      $CLI_1 volume status $V0
      $CLI_2 volume status $V1
      $CLI_1 peer status
      #EXPECT_WITHIN $PROBE_TIMEOUT 2 check_peers
      #EXPECT 'Started' volinfo_field $V0 'Status';
      #EXPECT 'Started' volinfo_field $V1 'Status';
      #two_diff_vols_stop_force
      #EXPECT_WITHIN $PROBE_TIMEOUT 2 check_peers
      cleanup;
_______________________________________________
Gluster-devel mailing list
Gluster-devel@xxxxxxxxxxx
http://supercolony.gluster.org/mailman/listinfo/gluster-devel