I'll let you know after we run with this for a few days but so far everything is fine and working normally. I'm on Centos 5.3 x86_64 btw.
An interesting note, after applying the inode64 option the "ifree" output after running xfs_db didn't actually change but the filesystem is working normally. I found a bunch of posts on the interweb of people who had that exact experience.
liam
On Tue, Jul 28, 2009 at 2:55 AM, Roger Torrentsgenerós <rtorrents@xxxxxxxxxxxxx> wrote:
Any light on this issue?
To sum up, I need to know if GlusterFS is capable of dealing with an xfs
filesystem mounted with the inode64 option, or if it will be shortly.
Sorry but it's an urgent matter to me.
Thanks a lot.
Roger
On Thu, 2009-07-23 at 04:13 -0700, Liam Slusser wrote:
>
>
> This brings up an interesting
> question. I just had a look on our large cluster (which is using xfs) and i've eaten up 98% of my free inodes. I am mounting the filesystem without any options so i assume i am not using the inode64 option. (i dont believe it is default even on 64bit systems).
>
>
> Is gluster giggy with using the inode64 mount option on xfs? My understanding is as long as the binary is 64bit it shouldnt have any issue (im using 64bit gluster binary i compiled myself).
>
>
> Anybody have some insight into this?
>
>
> liam
>
> On Thu, Jul 23, 2009 at 2:59 AM, Matthias Saou
> <thias@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
> wrote:
> Hi,
>
> Replying to myself with some more details : The servers are
> 64bit
> (x86_64) whereas the clients are 32bit (ix86). It seems like
> this could
> be the cause of this problem...
>
> http://oss.sgi.com/archives/xfs/2009-07/msg00044.html
>
> But if the glusterfs client doesn't know about the original
> inodes of
> the files, then it should be possible to fix, right?
>
> Matthias
>
> Matthias Saou wrote :
>
>
> > Hi,
> >
> > (Note: I have access to the systems referenced in the
> initial post)
> >
> > I think I've found the problem. It's the filesystem, XFS,
> which has
> > been mounted with the "inode64" option, as it can't be
> mounted without
> > since it has been grown to 39TB. I've just checked this :
> >
> > # ls -1 -ai /file/data/cust | sort -n
> >
> > And the last few lines are like this :
> >
> > [...]
> > 2148235729 cust2
> > 2148236297 cust6
> > 2148236751 cust5
> > 2148236974 cust7
> > 2148237729 cust3
> > 2148239365 cust4
> > 2156210172 cust8
> > 61637541899 cust1
> > 96636784146 cust9
> >
> > Note that "cust1" here is the one where the problem has been
> seen
> > initially. I've just checked, and the "cust9" directory is
> affected in
> > the exact same way.
> >
> > So it seems like the glusterfs build being used has problems
> with 64bit
> > inodes. Is this a known limitation? Is it easy to fix or
> work around?
> >
> > Matthias
> >
> > Roger Torrentsgenerós wrote :
> >
> > >
> > > We have 2 servers, let's name them file01 and file02. They
> are synced
> > > very frequently, so we can assume contents are the same.
> Then we have
> > > lots of clients, everyone of each has two glusterfs
> mountings, one
> > > against every file server.
> > >
> > > Before you ask, let me say the clients are in a production
> environment,
> > > where I can't afford any downtime. To make the migration
> from glusterfs
> > > v1.3 to glusterfs v2.0 as smooth as possible, I recompiled
> the packages
> > > to run under glusterfs2 name. Servers are running two
> instances of the
> > > glusterfs daemon, and the old one is to be stopped when
> all the
> > > migration is complete. So you'll be seeing some glusterfs2
> and build
> > > dates that may not be normal, but you'll also see this has
> nothing to do
> > > with this matter.
> > >
> > > file01 server log:
> > >
> > >
> ================================================================================
> > > Version : glusterfs 2.0.1 built on May 26 2009
> 05:11:51
> > > TLA Revision : 5c1d9108c1529a1155963cb1911f8870a674ab5b
> > > Starting Time: 2009-07-14 18:07:12
> > > Command line : /usr/sbin/glusterfsd2
> -p /var/run/glusterfsd2.pid
> > > PID : 6337
> > > System name : Linux
> > > Nodename : file01
> > > Kernel Release : 2.6.18-128.1.14.el5
> > > Hardware Identifier: x86_64
> > >
> > > Given volfile:
> > >
> +------------------------------------------------------------------------------+
> > > 1: # The data store directory to serve
> > > 2: volume filedata-ds
> > > 3: type storage/posix
> > > 4: option directory /file/data
> > > 5: end-volume
> > > 6:
> > > 7: # Make the data store read-only
> > > 8: volume filedata-readonly
> > > 9: type testing/features/filter
> > > 10: option read-only on
> > > 11: subvolumes filedata-ds
> > > 12: end-volume
> > > 13:
> > > 14: # Optimize
> > > 15: volume filedata-iothreads
> > > 16: type performance/io-threads
> > > 17: option thread-count 64
> > > 18: # option autoscaling on
> > > 19: # option min-threads 16
> > > 20: # option max-threads 256
> > > 21: subvolumes filedata-readonly
> > > 22: end-volume
> > > 23:
> > > 24: # Add readahead feature
> > > 25: volume filedata
> > > 26: type performance/read-ahead # cache per file =
> (page-count x
> > > page-size)
> > > 27: # option page-size 256kB # 256KB is the
> default option ?
> > > 28: # option page-count 8 # 16 is default
> option ?
> > > 29: subvolumes filedata-iothreads
> > > 30: end-volume
> > > 31:
> > > 32: # Main server section
> > > 33: volume server
> > > 34: type protocol/server
> > > 35: option transport-type tcp
> > > 36: option transport.socket.listen-port 6997
> > > 37: subvolumes filedata
> > > 38: option auth.addr.filedata.allow 192.168.128.* #
> streamers
> > > 39: option verify-volfile-checksum off # don't have
> clients complain
> > > 40: end-volume
> > > 41:
> > >
> > >
> +------------------------------------------------------------------------------+
> > > [2009-07-14 18:07:12] N [glusterfsd.c:1152:main]
> glusterfs: Successfully
> > > started
> > >
> > > file02 server log:
> > >
> > >
> ================================================================================
> > > Version : glusterfs 2.0.1 built on May 26 2009
> 05:11:51
> > > TLA Revision : 5c1d9108c1529a1155963cb1911f8870a674ab5b
> > > Starting Time: 2009-06-28 08:42:13
> > > Command line : /usr/sbin/glusterfsd2
> -p /var/run/glusterfsd2.pid
> > > PID : 5846
> > > System name : Linux
> > > Nodename : file02
> > > Kernel Release : 2.6.18-92.1.10.el5
> > > Hardware Identifier: x86_64
> > >
> > > Given volfile:
> > >
> +------------------------------------------------------------------------------+
> > > 1: # The data store directory to serve
> > > 2: volume filedata-ds
> > > 3: type storage/posix
> > > 4: option directory /file/data
> > > 5: end-volume
> > > 6:
> > > 7: # Make the data store read-only
> > > 8: volume filedata-readonly
> > > 9: type testing/features/filter
> > > 10: option read-only on
> > > 11: subvolumes filedata-ds
> > > 12: end-volume
> > > 13:
> > > 14: # Optimize
> > > 15: volume filedata-iothreads
> > > 16: type performance/io-threads
> > > 17: option thread-count 64
> > > 18: # option autoscaling on
> > > 19: # option min-threads 16
> > > 20: # option max-threads 256
> > > 21: subvolumes filedata-readonly
> > > 22: end-volume
> > > 23:
> > > 24: # Add readahead feature
> > > 25: volume filedata
> > > 26: type performance/read-ahead # cache per file =
> (page-count x
> > > page-size)
> > > 27: # option page-size 256kB # 256KB is the
> default option ?
> > > 28: # option page-count 8 # 16 is default
> option ?
> > > 29: subvolumes filedata-iothreads
> > > 30: end-volume
> > > 31:
> > > 32: # Main server section
> > > 33: volume server
> > > 34: type protocol/server
> > > 35: option transport-type tcp
> > > 36: option transport.socket.listen-port 6997
> > > 37: subvolumes filedata
> > > 38: option auth.addr.filedata.allow 192.168.128.* #
> streamers
> > > 39: option verify-volfile-checksum off # don't have
> clients complain
> > > 40: end-volume
> > > 41:
> > >
> > >
> +------------------------------------------------------------------------------+
> > > [2009-06-28 08:42:13] N [glusterfsd.c:1152:main]
> glusterfs: Successfully
> > > started
> > >
> > > Now let's pick a random client, for example streamer013,
> and see its
> > > log:
> > >
> > >
> ================================================================================
> > > Version : glusterfs 2.0.1 built on May 26 2009
> 05:23:52
> > > TLA Revision : 5c1d9108c1529a1155963cb1911f8870a674ab5b
> > > Starting Time: 2009-07-22 18:34:31
> > > Command line : /usr/sbin/glusterfs2 --log-level=NORMAL
> > > --volfile-server=file02.priv
> --volfile-server-port=6997 /mnt/file02
> > > PID : 14519
> > > System name : Linux
> > > Nodename : streamer013
> > > Kernel Release : 2.6.18-92.1.10.el5PAE
> > > Hardware Identifier: i686
> > >
> > > Given volfile:
> > >
> +------------------------------------------------------------------------------+
> > > 1: # filedata
> > > 2: volume filedata
> > > 3: type protocol/client
> > > 4: option transport-type tcp
> > > 5: option remote-host file02.priv
> > > 6: option remote-port 6997 # use non default
> to run in
> > > parallel
> > > 7: option remote-subvolume filedata
> > > 8: end-volume
> > > 9:
> > > 10: # Add readahead feature
> > > 11: volume readahead
> > > 12: type performance/read-ahead # cache per file =
> (page-count x
> > > page-size)
> > > 13: # option page-size 256kB # 256KB is the
> default option ?
> > > 14: # option page-count 2 # 16 is default
> option ?
> > > 15: subvolumes filedata
> > > 16: end-volume
> > > 17:
> > > 18: # Add threads
> > > 19: volume iothreads
> > > 20: type performance/io-threads
> > > 21: option thread-count 8
> > > 22: # option autoscaling on
> > > 23: # option min-threads 16
> > > 24: # option max-threads 256
> > > 25: subvolumes readahead
> > > 26: end-volume
> > > 27:
> > > 28: # Add IO-Cache feature
> > > 29: volume iocache
> > > 30: type performance/io-cache
> > > 31: option cache-size 64MB # default is 32MB (in
> 1.3)
> > > 32: option page-size 256KB # 128KB is default
> option (in 1.3)
> > > 33: subvolumes iothreads
> > > 34: end-volume
> > > 35:
> > >
> > >
> +------------------------------------------------------------------------------+
> > > [2009-07-22 18:34:31] N [glusterfsd.c:1152:main]
> glusterfs: Successfully
> > > started
> > > [2009-07-22 18:34:31] N
> [client-protocol.c:5557:client_setvolume_cbk]
> > > filedata: Connected to 192.168.128.232:6997, attached to
> remote volume
> > > 'filedata'.
> > > [2009-07-22 18:34:31] N
> [client-protocol.c:5557:client_setvolume_cbk]
> > > filedata: Connected to 192.168.128.232:6997, attached to
> remote volume
> > > 'filedata'.
> > >
> > > The mountings seem ok:
> > >
> > > [root@streamer013 /]# mount
> > > /dev/mapper/VolGroup00-LogVol00 on / type ext3 (rw)
> > > proc on /proc type proc (rw)
> > > sysfs on /sys type sysfs (rw)
> > > devpts on /dev/pts type devpts (rw,gid=5,mode=620)
> > > /dev/sda1 on /boot type ext3 (rw)
> > > tmpfs on /dev/shm type tmpfs (rw)
> > > none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
> > > glusterfs#file01.priv on /mnt/file01 type fuse
> > > (rw,max_read=131072,allow_other,default_permissions)
> > > glusterfs#file02.priv on /mnt/file02 type fuse
> > > (rw,max_read=131072,allow_other,default_permissions)
> > >
> > > They work:
> > >
> > > [root@streamer013 /]# ls /mnt/file01/
> > > cust
> > > [root@streamer013 /]# ls /mnt/file02/
> > > cust
> > >
> > > And they are seen by both servers:
> > >
> > > file01:
> > >
> > > [2009-07-22 18:34:19] N
> [server-helpers.c:723:server_connection_destroy]
> > > server: destroyed connection of streamer013.
> > >
> p4.bt.bcn.flumotion.net-14335-2009/07/22-18:34:13:210609-filedata
> > > [2009-07-22 18:34:31] N [server-protocol.c:7796:notify]
> server:
> > > 192.168.128.213:1017 disconnected
> > > [2009-07-22 18:34:31] N [server-protocol.c:7796:notify]
> server:
> > > 192.168.128.213:1018 disconnected
> > > [2009-07-22 18:34:31] N
> [server-protocol.c:7035:mop_setvolume] server:
> > > accepted client from 192.168.128.213:1017
> > > [2009-07-22 18:34:31] N
> [server-protocol.c:7035:mop_setvolume] server:
> > > accepted client from 192.168.128.213:1018
> > >
> > > file02:
> > >
> > > [2009-07-22 18:34:20] N
> [server-helpers.c:723:server_connection_destroy]
> > > server: destroyed connection of streamer013.
> > >
> p4.bt.bcn.flumotion.net-14379-2009/07/22-18:34:13:267495-filedata
> > > [2009-07-22 18:34:31] N [server-protocol.c:7796:notify]
> server:
> > > 192.168.128.213:1014 disconnected
> > > [2009-07-22 18:34:31] N [server-protocol.c:7796:notify]
> server:
> > > 192.168.128.213:1015 disconnected
> > > [2009-07-22 18:34:31] N
> [server-protocol.c:7035:mop_setvolume] server:
> > > accepted client from 192.168.128.213:1015
> > > [2009-07-22 18:34:31] N
> [server-protocol.c:7035:mop_setvolume] server:
> > > accepted client from 192.168.128.213:1014
> > >
> > > Now let's see the funny things. First, a content listing
> of a particular
> > > directory, locally from both servers:
> > >
> > > [root@file01 ~]# ls /file/data/cust/cust1
> > > configs files outgoing reports
> > >
> > > [root@file02 ~]# ls /file/data/cust/cust1
> > > configs files outgoing reports
> > >
> > > Now let's try to see the same from the client side:
> > >
> > > [root@streamer013 /]# ls /mnt/file01/cust/cust1
> > > ls: /mnt/file01/cust/cust1: No such file or directory
> > > [root@streamer013 /]# ls /mnt/file02/cust/cust1
> > > configs files outgoing reports
> > >
> > > Oops :( And the client log says:
> > >
> > > [2009-07-22 18:41:22] W [fuse-bridge.c:1651:fuse_opendir]
> > > glusterfs-fuse: 64: OPENDIR (null) (fuse_loc_fill()
> failed)
> > >
> > > While none of the servers logs say anything.
> > >
> > > So files really exist in the servers, but the same client
> can see them
> > > in one of the filers but not in the other, although both
> are running
> > > exactly the same software. But there's more. It seems it
> only happens
> > > for certain directories (I can't show you the contents due
> to privacity,
> > > but I guess you'll figure it out):
> > >
> > > [root@streamer013 /]# ls /mnt/file01/cust/|wc -l
> > > 95
> > > [root@streamer013 /]# ls /mnt/file02/cust/|wc -l
> > > 95
> > > [root@streamer013 /]# for i in `ls /mnt/file01/cust/`; do
> > > ls /mnt/file01/cust/$i; done|grep such
> > > ls: /mnt/file01/cust/cust1: No such file or directory
> > > ls: /mnt/file01/cust/cust2: No such file or directory
> > > [root@streamer013 /]# for i in `ls /mnt/file02/cust/`; do
> > > ls /mnt/file02/cust/$i; done|grep such
> > > [root@streamer013 /]#
> > >
> > > And of course, our client log error twice:
> > >
> > > [2009-07-22 18:49:21] W [fuse-bridge.c:1651:fuse_opendir]
> > > glusterfs-fuse: 2119: OPENDIR (null) (fuse_loc_fill()
> failed)
> > > [2009-07-22 18:49:21] W [fuse-bridge.c:1651:fuse_opendir]
> > > glusterfs-fuse: 2376: OPENDIR (null) (fuse_loc_fill()
> failed)
> > >
> > >
> > > I hope having been clear enough this time. If you need
> more data just
> > > let me know and I'll see what I can do.
> > >
> > > And thanks again for your help.
> > >
> > > Roger
> > >
> > >
> > > On Wed, 2009-07-22 at 09:10 -0700, Anand Avati wrote:
> > > > > I have been witnessing some strange behaviour with my
> GlusterFS system.
> > > > > Fact is there are some files which exist and are
> completely accessible
> > > > > in the server, while they can't be accessed from a
> client, while other
> > > > > files do.
> > > > >
> > > > > To be sure, I copied the same files to another
> directory and I still was
> > > > > unable to see them from the client. To be sure it
> wasn't any kind of
> > > > > file permissions, selinux or whatever issue, I created
> a copy from a
> > > > > working directory, and still wasn't seen from the
> client. All I get is
> > > > > a:
> > > > >
> > > > > ls: .: No such file or directory
> > > > >
> > > > > And the client log says:
> > > > >
> > > > > [2009-07-22 14:04:18] W
> [fuse-bridge.c:1651:fuse_opendir]
> > > > > glusterfs-fuse: 104778: OPENDIR (null)
> (fuse_loc_fill() failed)
> > > > >
> > > > > While the server log says nothing.
> > > > >
> > > > > Funniest thing is the same client has another
> GlusterFS mount to another
> > > > > server, which has exactly the same contents as the
> first one, and this
> > > > > mount does work.
> > > > >
> > > > > Some data:
> > > > >
> > > > > [root@streamer001 /]# ls /mnt/file01/cust/cust1/
> > > > > ls: /mnt/file01/cust/cust1/: No such file or directory
> > > > >
> > > > > [root@streamer001 /]# ls /mnt/file02/cust/cust1/
> > > > > configs files outgoing reports
> > > > >
> > > > > [root@streamer001 /]# mount
> > > > > /dev/mapper/VolGroup00-LogVol00 on / type ext3 (rw)
> > > > > proc on /proc type proc (rw)
> > > > > sysfs on /sys type sysfs (rw)
> > > > > devpts on /dev/pts type devpts (rw,gid=5,mode=620)
> > > > > /dev/sda1 on /boot type ext3 (rw)
> > > > > tmpfs on /dev/shm type tmpfs (rw)
> > > > > none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
> > > > > sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)
> > > > > glusterfs#file01.priv on /mnt/file01 type fuse
> > > > > (rw,max_read=131072,allow_other,default_permissions)
> > > > > glusterfs#file02.priv on /mnt/file02 type fuse
> > > > > (rw,max_read=131072,allow_other,default_permissions)
> > > > >
> > > > > [root@file01 /]# ls /file/data/cust/cust1
> > > > > configs files outgoing reports
> > > > >
> > > > > [root@file02 /]# ls /file/data/cust/cust1
> > > > > configs files outgoing reports
> > > > >
> > > > > Any ideas?
> > > >
> > > > Can you please post all your client and server logs and
> volfiles? Are
> > > > you quite certain that this is not a result of some
> misconfiguration?
> > > >
> > > > Avati
> > >
> > >
> > > _______________________________________________
> > > Gluster-devel mailing list
> > > Gluster-devel@xxxxxxxxxx
> > > http://lists.nongnu.org/mailman/listinfo/gluster-devel
> >
> >
>
>
> --
> Clean custom Red Hat Linux rpm packages :
> http://freshrpms.net/
> Fedora release 10 (Cambridge) - Linux kernel
>
> 2.6.27.25-170.2.72.fc10.x86_64 Load : 0.50 3.32 2.58
>
>
>
> _______________________________________________
> Gluster-devel mailing list
> Gluster-devel@xxxxxxxxxx
> http://lists.nongnu.org/mailman/listinfo/gluster-devel
>
>
>
> _______________________________________________
> Gluster-devel mailing list
> Gluster-devel@xxxxxxxxxx
> http://lists.nongnu.org/mailman/listinfo/gluster-devel
_______________________________________________
Gluster-devel mailing list
Gluster-devel@xxxxxxxxxx
http://lists.nongnu.org/mailman/listinfo/gluster-devel
