Ok Today ill check on 32 bits and mail you the results next ill pick a 64bit machine .. Regards, Angel El Miércoles, 16 de Enero de 2008 Matt Paine escribió: > > Thankyou. > > > Are you using or have access to a 64bit machine. I cleaned up the spec > files to use a dynamic lib directory rather than the hardcoded switches. > > I also added the "--without client" option to build rpms without > requiring the fuse-devel rpm (of course it doesn't build the client rpm :) > > > Could you get the tla (copy it to another directory so it doens't screw > up your current tla working copy) and copy this file over the current > glusterfs.spec.in file, and then do as per normal and let me know the > results.... > > http://www.mattsoftware.com/temp/glusterfs/glusterfs.spec.in > > > you can still use --without ibverbs, but also the --without client > should work > > Also if you have access to a 64bit machine, could you let me know if the > libraries get put into the correct place (/usr/lib64) > > > Thankyou again > > Matt. > > > > Hi Matt > > > > I got tla636 up and running. Just following the indications avati told me and > > the page you send me http://www.gluster.org/docs/index.php/GlusterFS_Building_RPMs. > > > > full ./configure before make.dist just got things fine but i had to get libibverbs source from the > > net, created a libibverbs.rpm and install it ( libibverbs-devel-1.0.4-1 and libibverbs-1.0.4-1) to > > acomplish dist tarball process. rpmbuild --without ibverbs was pain free > > > > rpms installed just fine on Os10.3 and also 10.1 without any complaint.So just were issues from > > a newbie on the Rpm proccess. Now i think im confident that I can repeat the process for every > > next releases. > > > > Now ive made a client only setup for testing new tla features that i didnt know (switch scheduler, > > login etc..) encfs over gluster to replace my encfs over nfs > > ¡¡This magic piece of code can do anything you want!! > > > > GlusterFS is far the most avanced atop fuse development and the most promising but still is hard to understand. > > > > From the rpm point of view. > > > > I can test anything you send me, > > - i think interesting server-only-rpms without ibverbs because tcp setup are by far the most deployed and easy to test. > > - fine tuning avoiding ib-verbs is good also as i see you are now incluing 32 vs 64 compilations.. > > > > and any other features. > > > > My setup for Opensuse actually includes /etc/sysconfig/glusterfs but my vars setup perhaps is not on Suse way yet. > > > > Have you considered expanding the "--with ibverbs" code to cover conditional server rpm creation? > > > > so tell me what you need me to do and ill try to test it to help you fine-tune the specs :-) > > > > > > Regards > > > > > > El Miércoles, 16 de Enero de 2008 Matt Paine escribió: > > > >>Hi Angel.... > >> > >>Sorry for posting off-list, but there are a few things I would like from > >>you before I make any huge changes to the spec file. Its great you were > >>able to get the RPM's working, but now you have successfuly done it I > >>want to clarify if my list will correctly fix any issues you had :) > >> > >> > >>* What version are you working on (TLA patch number?)? > >> > >>* Exactly what issues do you have and how you got around them? > >> > >> > >> > >>At the moment I *think* I need to fix up the following things. > >> > >>* create option to only build server > >>* remove fuse-devel dependancy for server only build > >>* try to find ib-verbs left over for a non-ibverbs build > >>* modify all lib directory entries to %__libdir > >> > >> > >> > >>Any further information will be great, I'll get onto this tonight and > >>let you know how I go. > >> > >>Also, would you mind testing out the new spec file once I get it working? > >> > >> > >>Thankyou. > >> > >> > >>Matt. > >> > >> > >> > >> > >> > >> > >>>Hi > >>> > >>>I tried to recreate RPMS as you told me (Avati & Matt) ¡¡Thanks for your help!! > >>> > >>>Still im getting minor errors..as building RPM without ibverbs still > >>>requires transport/ib-verbs/Makefile.in somewhere along the make. > >>> > >>>Anyone has experienced same problems? > >>> > >>>About the conditional client compilation patch patch, Matt: > >>> > >>>amenophis:~/Datos/src # rpmbuild -ta glusterfs-1.3.7.tar.gz --without ibverbs > >>>error: Failed build dependencies: > >>> fuse-devel is needed by glusterfs-1.3.7-1 > >>> > >>>This machine in not using fuse at all and i only wat it to server some directories so my patch tried to overcome this failure > >>>avoinding the client part "--without fuseclient" i hope you'll find a better and generalised way to select what packages to build. > >>> > >>> > >>>Build process transcript------------------------------------------------------------- > >>> > >>> > >>> > >>>>$ tla get -A gluster@xxxxxxxxxx glusterfs--mainline--2.5 glusterfs-dir > >>>>$ cd glusterfs-dir > >>> > >>> > >>> $ edit configure.ac, change [1.3.8] to [1.3.8tla636] > >>> > >>> > >>> > >>>>$ ./autogen.sh > >>>>$ ./configure --disable-ibverbs > >>>>$ make dist > >>>><.. new tarball glusterfs-1.3.8tla629.tar.gz created ..> > >>>>$ rpmbuild -ta glusterfs-1.3.8tla629.tar.gz --without ibverbs > >>> > >>>Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.7409 > >>>+ umask 022 > >>>+ cd /usr/src/packages/BUILD > >>>+ cd /usr/src/packages/BUILD > >>>+ rm -rf glusterfs-1.3.8tla636 > >>>+ /usr/bin/gzip -dc /home/sinosuke/Tmp/kk/glusterfs-1.3.8tla636.tar.gz > >>>... > >>>... > >>>... > >>>config.status: creating transport/ib-sdp/client/src/Makefile > >>>config.status: error: cannot find input file: transport/ib-verbs/Makefile.in > >>>error: Bad exit status from /var/tmp/rpm-tmp.7409 (%build) > >>> > >>> > >>>RPM build errors: > >>> Bad exit status from /var/tmp/rpm-tmp.7409 (%build) > >>> > >>>----------------------------------------------------------------------------------------------------- > >>> > >>> > >>> > >>> > >>>Regards, Angel > >>> > >> > >> > >> > > > > > > > > > -- ------------------------------------------------ Clist UAH ------------------------------------------------
