Hi,
I'm trying out different configurations of GlusterFS. I have 7 nodes each
with two 320 GB disks where 300 GB om each disk is for the distributed
file system.
Each node is called N. Every file system is on the server side mirrored to
the other disk on the next node, wrapped around so that the last node
mirrors its disk to the first. invented. The real config is included in
the end of this mail.
Pseudodefinitions:
fs(1) = a file system on the first disk
fs(2) = a file system on the second disk
n(I, fs(J)) = the fs J on node I
afr(N .. M) = mirror the volumes
stripe(N .. M) = stripe the volumes
Server:
Forw(N) = afr(fs(1), node(N+1, fs(2))
Back(N) = afr(fs(2), node(N-1, fs(1))
Client:
FStr(N .. M) = stripe(n(N, Forw(N)) .. n(N+i, Forw(N+1)) .. n(M, Forw(M)))
BStr(N .. M) = stripe(n(N, Back(N)) .. n(N+i, Back(N+1)) .. n(M, Back(M)))
mount /glusterfs = union(FStr(1 .. 7), BStr(1..7))
The goal was to get good performance but also redundancy. But this setup
will not will it? The stripes will not work when a part of is gone and the
union will not not magically find the other part of a file on the other
stripe? And where to put the union namespace for good performance?
But my major question is this: I tried to stripe a single stripe (not
using union on the client, just striping on the servers which in turn
mirrored) When rsync'ing in data on it on a single server things worked
fine, but when I put some load on it from the other nodes (dd'ing in and
out some large files) the glusterfsd's on the first server died... Do you
want me to check this up more and try to reproduce and narrow down the
problem, or is this kind of setup in general not a good idea?
Regards
Jerker Nyberg.
### client config
# remote slices
volume brick2
type protocol/client
option transport-type tcp/client
option remote-host 10.0.0.2
option remote-subvolume brick
end-volume
volume brick3
type protocol/client
option transport-type tcp/client
option remote-host 10.0.0.3
option remote-subvolume brick
end-volume
volume brick4
type protocol/client
option transport-type tcp/client
option remote-host 10.0.0.4
option remote-subvolume brick
end-volume
volume brick5
type protocol/client
option transport-type tcp/client # for TCP/IP transport
option remote-host 10.0.0.5
option remote-subvolume brick
end-volume
volume brick6
type protocol/client
option transport-type tcp/client
option remote-host 10.0.0.6
option remote-subvolume brick
end-volume
volume brick7
type protocol/client
option transport-type tcp/client
option remote-host 10.0.0.7
option remote-subvolume brick
end-volume
volume brick8
type protocol/client
option transport-type tcp/client
option remote-host 10.0.0.8
option remote-subvolume brick
end-volume
volume stripe
type cluster/stripe
subvolumes brick2 brick3 brick4 brick5 brick6 brick7 brick8
option block-size *:32KB
end-volume
### Add iothreads
volume iothreads
type performance/io-threads
option thread-count 32 # deault is 1
option cache-size 64MB #64MB
subvolumes stripe
end-volume
### Add readahead feature
volume readahead
type performance/read-ahead
option page-size 256kB # unit in bytes
# option page-count 20 # cache per file = (page-count x page-size)
option page-count 10 # cache per file = (page-count x page-size)
subvolumes iothreads
end-volume
### Add IO-Cache feature
volume iocache
type performance/io-cache
option page-size 256KB
# option page-size 100MB
option page-count 10
subvolumes readahead
end-volume
### Add writeback feature
volume writeback
type performance/write-behind
option aggregate-size 1MB
option flush-behind off
subvolumes iocache
end-volume
### server config for the 10.0.0.2
# posix
volume ba
type storage/posix
option directory /hda/glusterfs-a
end-volume
volume bc
type storage/posix
option directory /hdc/glusterfs-c
end-volume
# remote mirror
volume mc
type protocol/client
option transport-type tcp/client
option remote-host 10.0.0.3 # the next node
option remote-subvolume bc
end-volume
# join
volume afr
type cluster/afr
subvolumes ba mc
end-volume
# lock
volume pl
type features/posix-locks
subvolumes afr
end-volume
# threads
volume brick
type performance/io-threads
option thread-count 16 # deault is 1
option cache-size 128MB #64MB
subvolumes pl
end-volume
# export
volume server
type protocol/server
option transport-type tcp/server
subvolumes brick, bc
option auth.ip.brick.allow *
option auth.ip.bc.allow *
end-volume
# glusterfs --version
glusterfs 1.3.8 built on Nov 16 2007
Copyright (c) 2006, 2007 Z RESEARCH Inc. <http://www.zresearch.com>
GlusterFS comes with ABSOLUTELY NO WARRANTY.
You may redistribute copies of GlusterFS under the terms of the GNU
General Public License.
