Anand Avati wrote: > what kernel version are you using? it seems like a misbehaving epoll(). can > you give a log of dmesg? 2.6.12.6 The 'dmesg' output is attached. Sincerely yours. -- Thierry.EXCOFFIER@@liris.univ-lyon1.fr// GO: Oriental Strategy Game LIRIS/UFR Informatique, bat710 //DYLAN: Programming Language Universite Claude Bernard LYON 1 __// UNIX: Standard Operating System 43 Bd du 11 novembre 1918 // 69622 VILLEURBANNE, FRANCE //WWW: http://www710.univ-lyon1.fr/~exco
Linux version 2.6.12.6-arm1 (root@localhost.localdomain) (gcc version 3.4.4 (release) (CodeSourcery ARM 2005q3-2)) #79 Wed Oct 4 13:37:40 JST 2006 CPU: ARM926EJ-Sid(wb) [41069260] revision 0 (ARMv5TEJ) CPU0: D VIVT write-back cache CPU0: I cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets CPU0: D cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets Machine: MV-88fxx81 Using UBoot passing parameters structure Sys Clk = 200000000, Tclk = 166664740 - Warning - This LSP release was tested only with U-Boot release 1.7.3 Memory policy: ECC disabled, Data cache writeback On node 0 totalpages: 32768 DMA zone: 32768 pages, LIFO batch:15 Normal zone: 0 pages, LIFO batch:1 HighMem zone: 0 pages, LIFO batch:1 Built 1 zonelists Kernel command line: console=ttyS0,115200 root=/dev/sda2 rw initrd=0x00800040,15M panic=5 BOOTVER=1.01 PID hash table entries: 1024 (order: 10, 16384 bytes) Console: colour dummy device 80x30 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 128MB 0MB 0MB 0MB = 128MB total Memory: 110592KB available (3066K code, 513K data, 112K init) Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 15360K NET: Registered protocol family 16 FLASH boardId = 12 Flash bankwidth 1, base ff800000, size 400000 BUFFALO LS_GL FLASH size 4096[KB] Marvell Development Board (LSP Version 1.7.8_NAS)-- BUFFALO_BOARD_LS_GL Detected Tclk 166664740 and SysClk 200000000 Marvell USB EHCI Host controller #0: c1702b00 Marvell USB EHCI Host controller #1: c1702bc0 pexBarOverlapDetect: winNum 2 overlap current 0 mvPexInit:Warning :Bar 2 size is illigal it will be disabled please check Pex and CPU windows configuration PCI: bus0: Fast back to back transfers enabled PCI: bus1: Fast back to back transfers enabled SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub use IDMA acceleration in copy to/from user buffers. used channels 2 and 3 Done. cesadev_init(c0011304) mvCesaInit: sessions=640, queue=32, pSram=f0000000 Fast Floating Point Emulator V0.9 (c) Peter Teichmann. SGI XFS with no debug enabled Initializing Cryptographic API Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled ttyS0 at MMIO 0x0 (irq = 3) is a 16550A ttyS1 at MMIO 0x0 (irq = 4) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 3 RAM disks of 16384K size 1024 blocksize loop: loaded (max 8 devices) Marvell Gigabit Ethernet Driver 'egiga': o Ethernet descriptors in DRAM o DRAM SW cache-coherency o Checksum offload enabled o Loading network interface ** egiga_init_module (0) 'eth0' Intergrated Sata device found scsi0 : Marvell SCSI to SATA adapter scsi1 : Marvell SCSI to SATA adapter Vendor: Hitachi Model: HDT725050VLA360 Rev: V56O Type: Direct-Access ANSI SCSI revision: 03 SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) SCSI device sda: drive cache: write back SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda4 < sda5 sda6 > Attached scsi disk sda at scsi1, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi1, channel 0, id 0, lun 0, type 0 physmap flash device: 400000 at ff800000 CFI: Found no phys_mapped_flash device at location zero >jedec_probe Found: SST 39LF020 phys_mapped_flash: Found 1 x8 devices at 0x0 in 8-bit bank phys_mapped_flash: Found an alias at 0x40000 for the chip at 0x0 phys_mapped_flash: Found an alias at 0x80000 for the chip at 0x0 phys_mapped_flash: Found an alias at 0xc0000 for the chip at 0x0 phys_mapped_flash: Found an alias at 0x100000 for the chip at 0x0 phys_mapped_flash: Found an alias at 0x140000 for the chip at 0x0 phys_mapped_flash: Found an alias at 0x180000 for the chip at 0x0 phys_mapped_flash: Found an alias at 0x1c0000 for the chip at 0x0 phys_mapped_flash: Found an alias at 0x200000 for the chip at 0x0 phys_mapped_flash: Found an alias at 0x240000 for the chip at 0x0 phys_mapped_flash: Found an alias at 0x280000 for the chip at 0x0 phys_mapped_flash: Found an alias at 0x2c0000 for the chip at 0x0 phys_mapped_flash: Found an alias at 0x300000 for the chip at 0x0 phys_mapped_flash: Found an alias at 0x340000 for the chip at 0x0 phys_mapped_flash: Found an alias at 0x380000 for the chip at 0x0 phys_mapped_flash: Found an alias at 0x3c0000 for the chip at 0x0 number of JEDEC chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. cmdlinepart partition parsing not available RedBoot partition parsing not available ehci_platform ehci_platform.4523: EHCI Host Controller ehci_platform ehci_platform.4523: new USB bus registered, assigned bus number 1 ehci_platform ehci_platform.4523: irq 17, io mem 0x00000000 ehci_platform ehci_platform.4523: park 0 ehci_platform ehci_platform.4523: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected ehci_platform ehci_platform.16781: EHCI Host Controller ehci_platform ehci_platform.16781: new USB bus registered, assigned bus number 2 ehci_platform ehci_platform.16781: irq 12, io mem 0x00000000 ehci_platform ehci_platform.16781: park 0 ehci_platform ehci_platform.16781: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v2.2 Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice MICON ctrl (C) BUFFALO INC. V.1.00 installed. Kernel event proc (C) BUFFALO INC. V.1.00 installed. MICON V2 (C) BUFFALO INC. V.1.00 installed. NET: Registered protocol family 2 IP: routing cache hash table of 1024 buckets, 8Kbytes TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) NET: Registered protocol family 1 NET: Registered protocol family 17 RAMDISK: Compressed image found at block 0 EXT2-fs warning: checktime reached, running e2fsck is recommended VFS: Mounted root (ext2 filesystem). kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. XFS mounting filesystem sda2 Ending clean XFS mount for filesystem: sda2 XFS mounting filesystem sda2 Ending clean XFS mount for filesystem: sda2 VFS: Mounted root (xfs filesystem). Trying to move old root to /initrd ... failed Unmounting old root Trying to free ramdisk memory ... okay Freeing init memory: 112K Adding 136512k swap on /dev/ls_disk1_5. Priority:-1 extents:1 kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. eth0: link down XFS mounting filesystem sda6 Starting XFS recovery on filesystem: sda6 (dev: sda6) eth0: link up<5>, full duplex<5>, speed 100 Mbps<5> Ending XFS recovery on filesystem: sda6 (dev: sda6) usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
