Hi Paul, Can you switch to fuse-2.7.0-glfs3 ? because glfs1 and glfs2 have some known issues. Also after upgrading to new fuse (you need both libfuse and fuse kernel module), recompile the glusterfs. do 'rmmod fuse' and 'modprobe fuse' to the latest fuse Hope that helps.. if the problem persists, let us know. Regards, Amar On 9/7/07, Paul Jochum <jochum@xxxxxxxxxxxxxxxxxx> wrote: > > Hi All: > > Ok, now that I have glusterfs up and running, first test is an rsync > (well, actually, the second test, because the first test was a simple cp > and that worked). > This is what I get: > > *rsync -avHP /usr/local/ /mnt/point* > building file list ... > 188 files to consider > lib/ > lib/libfuse.a > 156462 100% 5.90MB/s 0:00:00 (xfer#1, to-check=169/188) > lib/libfuse.la > 986 100% 45.85kB/s 0:00:00 (xfer#2, to-check=168/188) > lib/libfuse.so.2.7.0 > rsync: writefd_unbuffered failed to write 4 bytes [sender]: Broken pipe > (32) > rsync: write failed on "/mnt/point/lib/libfuse.a": Input/output error (5) > rsync error: error in file IO (code 11) at receiver.c(253) [receiver=2.6.8 > ] > rsync: connection unexpectedly closed (3963 bytes received so far) > [generator] > rsync error: error in rsync protocol data stream (code 12) at io.c(463) > [generator=2.6.8] > rsync: connection unexpectedly closed (80 bytes received so far) [sender] > rsync error: error in rsync protocol data stream (code 12) at io.c(463) > [sender=2.6.8] > > Here is some background information: > *Client Side:* > No messages in the log files (either gluster's log file or > /var/log/messages) > > glusterfs -V > glusterfs 1.3.1 > > fuse version is fuse-2.7.0-glfs1 > > spec file: > volume client > type protocol/client > option transport-type tcp/client # for TCP/IP transport > option remote-host 192.168.1.225 # IP address of the remote brick > option remote-subvolume brick # name of the remote volume > end-volume > > machine's OS = CentOS release 5 (Final) > 2.6.18-8.1.8.el5 #1 SMP Tue Jul 10 06:50:22 EDT 2007 i686 i686 i386 > GNU/Linux > > > *Server Side:* > No messages in the log files (either gluster's log file or > /var/log/messages) > > glusterfsd -V > glusterfs 1.3.1 > > spec file: > volume brick > type storage/posix # POSIX FS translator > option directory /home/export # Export this directory > end-volume > > volume server > type protocol/server > option transport-type tcp/server # For TCP/IP transport > subvolumes brick > option auth.ip.brick.allow * # Allow access to "brick" volume > end-volume > > machine's OS = Scientific Linux SL release 5.0 (Boron) > 2.6.18-8.1.6.el5 #1 SMP Thu Jun 14 11:57:17 EDT 2007 i686 > > The server and client are connected through a wireless connection (I am > testing for usability, not for performance). I can perform an rsync > using an SSH connection between the two computers without a problem, but > over glusterfs I keep hitting the same errors. If I perform an rsync of > only the file that caused the initial error, that works fine. However, > starting a new rsync will then fail on another file. > > So, any suggestions? > > thanks, > > Paul Jochum > _______________________________________________ > Gluster-devel mailing list > Gluster-devel@xxxxxxxxxx > http://lists.nongnu.org/mailman/listinfo/gluster-devel > -- Amar Tumballi Engineer - Gluster Core Team [bulde on #gluster/irc.gnu.org] http://www.zresearch.com - Commoditizing Supercomputing and Superstorage!
