Hans, please ensure that the volume which has been specified as 'option remote-subvolume <name>' in the client has been properly exported with 'option auth.ip.<name>.allow *' and that the <name>'s are actually matching. thanks, avati 2007/7/4, Hans Einar Gautun <einar.gautun@xxxxxxxxxxx>:
Ok. First: Todays running setup on version 1.2.3, running in one server process: ### Export volume "home" with the contents of "/tellus/home" directory. volume home type storage/posix # POSIX FS translator option directory /tellus/home # Export this directory end-volume volume local type storage/posix # POSIX FS translator option directory /tellus/local # Export this directory end-volume ### Add network serving capability to above brick. volume server type protocol/server option transport-type tcp/server # For TCP/IP transport # option transport-type ib-sdp/server # For Infiniband transport option bind-address 159.162.84.8 # Default is to listen on all interfaces option listen-port 6996 # Default is 6996 option client-volume-filename /etc/glusterfs/glusterfs-client.home.vol subvolumes home # NOTE: Access to any volume through protocol/server is denied by # default. You need to explicitly grant access through # "auth" # option. option auth.ip.home.allow 159.162.84.* # Allow access to "brick" volume #option auth.ip.brick.allow 127.0.0.1 # Allow access to "brick" volume end-volume volume server type protocol/server option transport-type tcp/server # For TCP/IP transport # option transport-type ib-sdp/server # For Infiniband transport option bind-address 159.162.84.8 # Default is to listen on all interfaces option listen-port 6997 # Default is 6996 option client-volume-filename /etc/glusterfs/glusterfs-client.local.vol subvolumes local # NOTE: Access to any volume through protocol/server is denied by # default. You need to explicitly grant access through # "auth" # option. option auth.ip.local.allow 159.162.84.* # Allow access to "brick" volume end-volume _________________________________________________________________ I want to use the newest version, 1.3.0-pre5, and here is a test config that doesn't work: volume tester type storage/posix # POSIX FS translator option directory /m1 # Export this directory end-volume volume test #volume io-threads1 type performance/io-threads option thread-count 4 option cache-size 32MB subvolumes tester end-volume ### Add POSIX record locking support to the storage brick #volume test # type features/posix-locks # option mandatory on # enables mandatory locking on all files # subvolumes io-threads1 #end-volume ### Add network serving capability to above brick. volume server type protocol/server option transport-type tcp/server # For TCP/IP transport # option transport-type ib-sdp/server # For Infiniband transport # option bind-address 192.168.1.10 # Default is to listen on all interfaces option listen-port 6996 # Default is 6996 # option client-volume-filename /etc/glusterfs/glusterfs-client.vol subvolumes tester # NOTE: Access to any volume through protocol/server is denied by # default. You need to explicitly grant access through # "auth" # option. option auth.ip.tester.allow 159.162.84.* # Allow access to "brick" volume # option auth.ip.trashcan.allow 192.168.* # Allow access to "trashcan" volume end-volume volume tester2 type storage/posix # POSIX FS translator option directory /m2 # Export this directory end-volume volume test2 #volume io-threads2 type performance/io-threads option thread-count 4 option cache-size 32MB subvolumes tester2 end-volume ### Add POSIX record locking support to the storage brick #volume test2 # type features/posix-locks # option mandatory on # enables mandatory locking on all files # subvolumes io-threads2 #end-volume ### Add 'trashcan' support, which stores the deleted files in '/.trash' dir #volume trashcan # type features/trash # subvolumes brick #end-volume ### Add network serving capability to above brick. volume server type protocol/server option transport-type tcp/server # For TCP/IP transport # option transport-type ib-sdp/server # For Infiniband transport # option bind-address 192.168.1.10 # Default is to listen on all interfaces option listen-port 6997 # Default is 6996 # option client-volume-filename /etc/glusterfs/glusterfs-client.vol subvolumes tester2 # NOTE: Access to any volume through protocol/server is denied by # default. You need to explicitly grant access through # "auth" # option. option auth.ip.tester2.allow 159.162.84.* # Allow access to "brick" volume # option auth.ip.trashcan.allow 192.168.* # Allow access to "trashcan" volume end-volume Only the first volume is mountable, if any. If I remove one definition the config works. regards Einar On ons, 2007-07-04 at 19:39 +0530, Anand Avati wrote: > Hans, > I dint quite understand your question. Can you please attach your > configs and mention what exactly did not work? > > regards, > avati > > > 2007/7/4, Hans Einar Gautun < einar.gautun@xxxxxxxxxxx>: > Hi all, > > I'm not able to use my old server config declaring two > different > directories for plain "NFS" export. > Is this right, or is the syntax just different? > Or do I have to start another server process for the second > directory? > > Thanks in advance. > > -- > Einar Gautun gauhan@xxxxxxxxxxx > > Statens kartverk | Norwegian Mapping Authority > 3507 Hønefoss | NO-3507 Hønefoss, Norway > > Ph +47 32118372 Fax +47 32118101 Mob +47 92692662 > > > _______________________________________________ > Gluster-devel mailing list > Gluster-devel@xxxxxxxxxx > http://lists.nongnu.org/mailman/listinfo/gluster-devel > > > > -- > Anand V. Avati -- Einar Gautun gauhan@xxxxxxxxxxx Statens kartverk | Norwegian Mapping Authority 3507 Hønefoss | NO-3507 Hønefoss, Norway Ph +47 32118372 Fax +47 32118101 Mob +47 92692662
-- Anand V. Avati
