Hi, You can create a list of IP addresses which is comment delimited. For example: option auth.ip.brick.allow 192.168.28.6,192.168.28.7 Hope that helps. Majied On Mon, 30 Apr 2007 17:38:07 +0200 Sebastien LELIEVRE <slelievre@xxxxxxxxxxxxxxxx> wrote: > Hello everyone > > I'm posting this here because I need an advice from you. > > On all examples presented on the web-site, and the user-config posted > here, you always allow a wide range of IP address (something like option > auth.ip.brick.allow 192.168.28.* ) > > My question is : how to I configure the servers in order to accept just > a list of IP addresses ? > > I've tried this config : > > volume server > type protocol/server > option transport-type tcp/server > interfaces > subvolumes brick > option auth.ip.brick.allow 192.168.28.6 > option auth.ip.brick.allow 192.168.28.7 > end-volume > > and client 192.168.28.6 wasn't able to connect. > Error message on this client side is : Transport endpoint is not connected > > and on the server side, the log give us this : > > [Apr 30 17:16:57] [DEBUG/tcp-server.c:134/tcp_server_notify()] > tcp/server:Registering socket (5) for new transport object of 192.168.28.6 > [Apr 30 17:17:08] [DEBUG/proto-srv.c:2418/mop_setvolume()] > server-protocol:mop_setvolume: received port = 1022 > [Apr 30 17:17:08] [DEBUG/proto-srv.c:2434/mop_setvolume()] > server-protocol:mop_setvolume: IP addr = 192.168.28.7, received ip addr > = 192.168.28.6 > [Apr 30 17:17:08] [ERROR/common-utils.c:55/full_rw()] > libglusterfs:full_rw: 0 bytes r/w instead of 113 (errno=17) > [Apr 30 17:17:08] > [DEBUG/protocol.c:244/gf_block_unserialize_transport()] > libglusterfs/protocol:gf_block_unserialize_transport: full_read of > header failed > [Apr 30 17:17:08] [DEBUG/proto-srv.c:2868/proto_srv_cleanup()] > protocol/server:cleaned up xl_private of 0x8050998 > [Apr 30 17:17:08] [CRITICAL/tcp.c:82/tcp_disconnect()] > transport/tcp:closing socket: 5 priv->connected = 1 > [Apr 30 17:17:08] [DEBUG/tcp-server.c:229/gf_transport_fini()] > tcp/server:destroying transport object for 192.168.28.6:1022 (fd=5) > [Apr 30 17:17:19] [DEBUG/tcp-server.c:134/tcp_server_notify()] > tcp/server:Registering socket (5) for new transport object of 192.168.28.6 > [Apr 30 17:17:28] [DEBUG/proto-srv.c:2418/mop_setvolume()] > server-protocol:mop_setvolume: received port = 1021 > [Apr 30 17:17:28] [DEBUG/proto-srv.c:2434/mop_setvolume()] > server-protocol:mop_setvolume: IP addr = 192.168.28.7, received ip addr > = 192.168.28.6 > [Apr 30 17:17:28] [ERROR/common-utils.c:55/full_rw()] > libglusterfs:full_rw: 0 bytes r/w instead of 113 (errno=9) > [Apr 30 17:17:28] > [DEBUG/protocol.c:244/gf_block_unserialize_transport()] > libglusterfs/protocol:gf_block_unserialize_transport: full_read of > header failed > [Apr 30 17:17:28] [DEBUG/proto-srv.c:2868/proto_srv_cleanup()] > protocol/server:cleaned up xl_private of 0x804b1e8 > [Apr 30 17:17:28] [CRITICAL/tcp.c:82/tcp_disconnect()] > transport/tcp:closing socket: 5 priv->connected = 1 > [Apr 30 17:17:28] [DEBUG/tcp-server.c:229/gf_transport_fini()] > tcp/server:destroying transport object for 192.168.28.6:1021 (fd=5) > > On the other hand, client 192.168.28.7 is successfully connected. > > Both server and client versions are 1.3.0-pre3 from the latest tla. > > Regards, > > Enkahel > > Sebastien LELIEVRE > slelievre@xxxxxxxxxxxxxxxx Services to ISP > TBS-internet http://www.TBS-internet.com: > > > _______________________________________________ > Gluster-devel mailing list > Gluster-devel@xxxxxxxxxx > http://lists.nongnu.org/mailman/listinfo/gluster-devel
