Re: svn co / cp fail

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Pooya,
      please update the appropriate 'option auth.ip.<brick>.allow'
lines in the protocol/server translator to allow the new volume names
(locks*) from the preivous names (brick*)

thanks,
avati


On Thu, Apr 26, 2007 at 10:27:46AM -0700, Pooya Woodcock wrote:
> Avati,
> Thanks, I confirmed that the bug is fixed!
> 
> I loaded the posix-locks translater as follows on the server side.  
> Did I do this right? I couldn't get the volume to mount when I put  
> "subvolumes locks locks-afr" in the protocol/server translator (and  
> then also changing the client side to look for remote-subvolume locks  
> and remote-subvolume locks-afr). When I had the remote subvolumes set  
> to locks and locks-afr, I got this error:
> Apr 26 10:05:13] [ERROR/tcp-client.c:123/do_handshake()] tcp/ 
> client:SETVOLUME on remo
> te server failed (Volume "locks-afr" is not attachable from host  
> 10.175.175.134)
> 
> ## current server.vol ###
> volume brick
>         type storage/posix
>         option directory /GlusterFS
> end-volume
> 
> volume locks
>   type features/posix-locks
>   subvolumes brick
> end-volume
> 
> volume brick-afr
>         type storage/posix
>         option directory /GlusterFS-AFR
> end-volume
> 
> volume locks-afr
>   type features/posix-locks
>   subvolumes brick-afr
> end-volume
> 
> volume server
>         type protocol/server
>         option transport-type tcp/server
>         option bind-address 10.175.175.137
>         option listen-port 6996
>         subvolumes brick brick-afr
>         option auth.ip.brick.allow 10.175.175.*
>         option auth.ip.brick-afr.allow 10.175.175.*
> end-volume
> 
> 
> 
> On Apr 26, 2007, at 9:43 AM, Anand Avati wrote:
> 
> >Pooya,
> >  the bug was in posix-locks. posis-locks is supposed to be loaded on
> >server side just above the storage/posix trnaslator. loading it on the
> >client side makes it lock only for processes within the same machine.
> >
> >the bug has been fixed in posix locks, but nonetheless you need to
> >load posix-locks on server side for it to be put to use at all. please
> >tla update to get the fix (or just loading posix-locks on serverside
> >alone will fix it too)
> >
> >avati
> >
> >On Thu, Apr 26, 2007 at 08:31:27AM -0700, Pooya Woodcock wrote:
> >>
> >>On Apr 26, 2007, at 2:51 AM, Anand Avati wrote:
> >>>Pooya,
> >>> the svn was failing because of the same root cause as brent was
> >>>facing for mtime failures. i have committed some changes to
> >>>write-behind to use a more 'play safe' flushing policy. I am able to
> >>>successfully svn co now.
> >>>
> >>> I am still unable to reprodcue the cp issue. please give me your
> >>>spec files and the commands you executed before you got the bug.
> >>>
> >>>regards,
> >>>avati
> >>
> >>
> >>Hi Avati,
> >>   After upgrading to patch-123, all I did was start copying files
> >>around and then noticed that I can't overwrite any file. My shell
> >>thinks that the file is a directory when it is not. I just did
> >>another test:
> >>
> >>[root@node01 www]# touch hi
> >>[root@node01 www]# touch hi2
> >>[root@node01 www]# cp hi2 hi
> >>cp: overwrite `hi'? yes
> >>cp: cannot create regular file `hi': No such file or directory
> >>
> >>[root@node01 www]# mv hi2 hi
> >>mv: overwrite `hi'? yes
> >>
> >>[root@node01 www]# cp hi hi2
> >>[root@node01 www]# ls -l hi*
> >>-rw-r--r--  1 root root 0 Apr 26 08:22 hi
> >>-rw-r--r--  1 root root 0 Apr 26 08:23 hi2
> >>
> >>[root@node01 www]# rm hi
> >>rm: remove regular empty file `hi'? yes
> >>[root@node01 www]# rm hi2
> >>rm: remove regular empty file `hi2'? yes
> >>[root@node01 www]#
> >>
> >>
> >>So you see, it is just the cp/overwrite which fails. This happens on
> >>nodes 2-4 also.
> >>***After reverting to patch 119, all the above commands work fine***
> >>
> >>Here are the conf files for glusterfs/glusterfsd I am using....
> >>
> >>There are 4 servers and 4 clients.
> >>## SERVER.VOL (same on each except for bind-address) ##
> >>
> >>volume brick
> >>        type storage/posix
> >>        option directory /GlusterFS
> >>end-volume
> >>
> >>volume brick-afr
> >>        type storage/posix
> >>        option directory /GlusterFS-AFR
> >>end-volume
> >>
> >>volume server
> >>        type protocol/server
> >>        option transport-type tcp/server
> >>        option bind-address 10.175.175.134
> >>        option listen-port 6996
> >>        subvolumes brick brick-afr
> >>        option auth.ip.brick.allow 10.175.175.*
> >>        option auth.ip.brick-afr.allow 10.175.175.*
> >>end-volume
> >>
> >>
> >>### CLIENT.VOL ###
> >>volume brick1
> >>type protocol/client
> >>option transport-type tcp/client
> >>option remote-host 10.175.175.134
> >>option remote-port 6996
> >>option remote-subvolume brick
> >>end-volume
> >>
> >>volume brick1-afr
> >>type protocol/client
> >>option transport-type tcp/client
> >>option remote-host 10.175.175.135
> >>option remote-port 6996
> >>option remote-subvolume brick-afr
> >>end-volume
> >>
> >>volume brick2
> >>type protocol/client
> >>option transport-type tcp/client
> >>option remote-host 10.175.175.135
> >>option remote-port 6996
> >>option remote-subvolume brick
> >>end-volume
> >>
> >>volume brick2-afr
> >>type protocol/client
> >>option transport-type tcp/client
> >>option remote-host 10.175.175.136
> >>option remote-port 6996
> >>option remote-subvolume brick-afr
> >>end-volume
> >>
> >>volume brick3
> >>type protocol/client
> >>option transport-type tcp/client
> >>option remote-host 10.175.175.136
> >>option remote-port 6996
> >>option remote-subvolume brick
> >>end-volume
> >>
> >>volume brick3-afr
> >>type protocol/client
> >>option transport-type tcp/client
> >>option remote-host 10.175.175.137
> >>option remote-port 6996
> >>option remote-subvolume brick-afr
> >>end-volume
> >>
> >>volume brick4
> >>type protocol/client
> >>option transport-type tcp/client
> >>option remote-host 10.175.175.137
> >>option remote-port 6996
> >>option remote-subvolume brick
> >>end-volume
> >>
> >>volume brick4-afr
> >>type protocol/client
> >>option transport-type tcp/client
> >>option remote-host 10.175.175.134
> >>option remote-port 6996
> >>option remote-subvolume brick-afr
> >>end-volume
> >>
> >>volume afr1
> >>type cluster/afr
> >>subvolumes brick1 brick1-afr
> >>option replicate *:2
> >>end-volume
> >>
> >>volume afr2
> >>type cluster/afr
> >>subvolumes brick2 brick2-afr
> >>option replicate *:2
> >>end-volume
> >>
> >>volume afr3
> >>type cluster/afr
> >>subvolumes brick3 brick3-afr
> >>option replicate *:2
> >>end-volume
> >>
> >>volume afr4
> >>type cluster/afr
> >>subvolumes brick4 brick4-afr
> >>option replicate *:2
> >>end-volume
> >>
> >>volume unify1
> >>type cluster/unify
> >>subvolumes afr1 afr2 afr3 afr4
> >>  option readdir-force-success on
> >>  option scheduler rr
> >>  option rr.limits.min-free-disk 10GB
> >>end-volume
> >>
> >>volume locks
> >>        type features/posix-locks
> >>        subvolumes unify1
> >>end-volume
> >>
> >
> >-- 
> >ultimate_answer_t
> >deep_thought (void)
> >{
> >  sleep (years2secs (7500000));
> >  return 42;
> >}
> 
> 

-- 
ultimate_answer_t
deep_thought (void)
{ 
  sleep (years2secs (7500000)); 
  return 42;
}




[Index of Archives]     [Gluster Users]     [Ceph Users]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux