Node2 has been booted with PXE and waiting at Starting
Gping daemon.....
So I believe the node 2 is healthy. Master recognizes the MAC
address
when it is capturing all the MAC addresses. I have 5 as the number
of
total nodes. 1 master and 4 clients. I accepted all 5.
Susumu Urata
Technical Consultant
408-873-2760 (Voice)
408-873-2761 (Fax)
----- Original Message -----
From: "Anand Babu" <ab@xxxxxxxxxx>
To: "Susumu Urata (Technocross)" <susumu_urata@xxxxxxxxxxxxxxx>
Cc: <gluster-devel@xxxxxxxxxx>
Sent: Thursday, June 22, 2006 3:18 PM
Subject: Re: Active Nodes cannot find all
,----[ Susumu Urata (Technocross) wrote: ]
| I have 1 master and 4 client nodes but I can only see three
nodes
| listed in Active Nodes. Node2 is always missing.
|
| No matter how many times I hit refresh, the second node does
not
| get listed.
|
| node names : glusterhpc1, glusterhpc2 (missing), glusterhpc3,
| glusterhpc4, glusterhpc5
|
| Hit OK and select the partition, then three nodes listed in the
| active nodes start loading but node 2.
|
| What I am doing wrong?
|
| Susumu Urata
| Technical Consultant
`----
It looks like PXE network booting is not working on node2. Attach
a
monitor to your node2 while it is booting and see it if attempts
network booting.
If network booting not enabled. Check in your BIOS settings, if
enable
BOOT-ROM option is enabled and network booting is listed in the
boot
order.
--
Anand Babu
GPG Key ID: 0x62E15A31
Blog [http://ab.freeshell.org]
The GNU Operating System [http://www.gnu.org]
