locate_stage3.sh now supports. NFS and SAMBA
support. for stage3 sources.
HTTP framework ready..but not fully supported.
Regards
Harshavardhana
? locate-stage3.diff
Index: stage2/skel-master/etc/stage2/locate_stage3.sh
===================================================================
RCS file: /sources/gluster/gluster-alpha1/stage2/skel-master/etc/stage2/locate_stage3.sh,v
retrieving revision 1.5
diff -p -u -r1.5 locate_stage3.sh
--- stage2/skel-master/etc/stage2/locate_stage3.sh 21 Feb 2006 12:48:13 -0000 1.5
+++ stage2/skel-master/etc/stage2/locate_stage3.sh 6 Apr 2006 18:01:59 -0000
@@ -15,36 +15,66 @@ list_cdrom_devices ()
done
}
+
method_nfs ()
{
local ip;
- local exportpoint;
+ local share;
+ local ip_exportpoint;
+ local exportpoint_subdir;
while :
do
- ip=$( dialog --inputbox "NFS server IP" 0 0 "${ip}" 2>&1 >&3 ) || return 1;
- exportpoint=$( dialog --inputbox "NFS server export path" 0 0 "${exportpoint}" 2>&1 >&3 ) || return 1;
-
+ ip_exportpoint=$( dialog --inputbox " Specify NFS share address as \n example: HOSTNAME:/YOURSHARNAME,\n HOSTNAME example: 192.168.0.1 \n
+ NFS server share path " 0 0 "${ip_exportpoint}" 2>&1 >&3 ) || return 1;
+ [ -z "${ip_exportpoint}" ] && {
+ dialog --msgbox " Given NFS share path is invalid " 0 0;
+ continue;
+ }
+ ip=$(echo $ip_exportpoint | cut -f1 -d':');
+ [ -z "{ip}" ] && {
+ dialog --msgbox " Specified HOSTNAME is invalid... " 0 0;
+ continue;
+ }
+ share=$(echo $ip_exportpoint | cut -f2 -d':');
+ [ -z "${share}" ] && {
+ dialog --msgbox " Specified share point is invalid... " 0 0;
+ continue;
+ }
+ exportpoint_subdir=$( dialog --inputbox " if remote directory path is \n 192.168.0.1:/YOURSHARENAME/Gluster/extensions \n then enter example: /Gluster/extensions \n NFS server subdirectory path " 0 0 "${exportpoint_subdir}" 2>&1 >&3 ) || return 1;
while :
- do
+ do
/sbin/ip route get "${ip}";
[ $? -eq 0 ] && break;
- dialog --yesno "${ip} is not reachable. configure network?" 0 0 || break
+ dialog --yesno " ${ip} is not reachable. configure network? " 0 0 || break;
/etc/stage2/config_network.sh;
done
/sbin/ip route get "${ip}";
[ $? -eq 0 ] || continue;
mkdir -p /mnt/nfs;
- mount -t nfs $ip:$exportpoint /mnt/nfs;
+ [ -z "${exportpoint_subdir}" ] && {
+ mount -t nfs $ip_exportpoint /mnt/nfs;
+ [ $? -eq 0 ] || {
+ dialog --msgbox " Could not mount NFS volume from $ip_exportpoint " 0 0;
+ continue;
+ }
+ [ -f /mnt/nfs/core.gex ] || {
+ dialog --msgbox " $ip_exportpoint is not a valid gluster stage3 directory " 0 0;
+ umount /mnt/nfs;
+ continue;
+ }
+ }
+ mount -t nfs $ip_exportpoint$exportpoint_subdir /mnt/nfs;
[ $? -eq 0 ] || {
- dialog --msgbox " Could not mount NFS volume from $ip:$exportpoint " 0 0;
+ dialog --msgbox " Could not mount NFS volume from $ip_exportpoint$exportpoint_subdir " 0 0 ;
continue;
}
[ -f /mnt/nfs/core.gex ] || {
- dialog --msgbox " $ip:$exportpoint is not a valid gluster stage3 export " 0 0;
+ dialog --msgbox " $ip_exportpoint$exportpoint_subdir is not a valid gluster stage3 directory " 0 0;
umount /mnt/nfs;
continue;
}
+
rm -rf /stage3 && ln -sf /mnt/nfs /stage3;
[ $? -eq 0 ] || {
dialog --msgbox " Could not create symlink " 0 0;
@@ -54,7 +84,100 @@ method_nfs ()
return 0;
done
}
+method_samba()
+{
+ local ip;
+ local share;
+ local ip_sambapath;
+ local samba_subdir;
+ while :
+ do
+ ip_sambapath=$( dialog --inputbox " Specify SAMBA share path as \n example : //HOSTNAME/YOURSHARE \n HOSTNAME example: 192.168.0.1 \n SAMBA server path " 0 0 "${ip_sambapath}" 2>&1 >&3) || return 1;
+ ip=$(echo $ip_sambapath | sed -e 's/^.*\/\///' | cut -f1 -d'/');
+ share=$(echo $ip_sambapath | sed -e 's/^.*\/\///' | cut -f2 -d'/');
+ [ -z "${ip_sambapath}" ] && {
+ dialog --msgbox " Given SMB share path is invalid " 0 0;
+ continue;
+ }
+ [ -z "${ip}" ] && {
+ dialog --msgbox " Given Hostname is invalid... " 0 0;
+ continue;
+ }
+ [ -z "${share}" ] && {
+ dialog --msgbox " Given Sharepath is invalid... " 0 0;
+ continue;
+ }
+ samba_subdir=$( dialog --inputbox " If remote directory path is \n /YOURSHARE/Gluster/extensions/ \n example: Gluster/extensions/ \n SAMBA server subdir path " 0 0 "${samba_subdir}" 2>&1 >&3) || return 1;
+ while :
+ do
+ /sbin/ip route get "${ip}";
+ [ $? -eq 0 ] && break;
+ dialog --yesno " $ip is not reachable. configure network? " || break;
+ /etc/stage2/config_network.sh
+ done
+ /sbin/ip route get "${ip}";
+ [ $? -eq 0 ] || continue;
+ mkdir -p /mnt/samba;
+ [ -z "${samba_subdir}" ] && {
+ mount -f smbfs $ip_sambapath /mnt/samba;
+ [ $? -eq 0 ] || {
+ dialog --msgbox " Could not mount SAMBA volume from $ip_sambapath " 0 0;
+ continue;
+ }
+ [ -f /mnt/samba/core.gex ] || {
+ dialog --msgbox " $ip_sambapath is not a VALID gluster stage3 directory " 0 0;
+ umount /mnt/samba;
+ continue;
+ }
+ }
+ mount -t smbfs $ip_sambapath/$samba_subdir /mnt/samba;
+ [ $? -eq 0 ] || {
+ dialog --msgbox " Could not mount SAMBA volume from $ip_sambapath/$samba_subdir " 0 0;
+ continue;
+ }
+ [ -f /mnt/samba/core.gex ] || {
+ dialog --msgbox " $ip_sambapath/$samba_subdir is not a VALID gluster stage3 subdir " 0 0;
+ umount /mnt/samba;
+ continue;
+ }
+ rm -rf /stage3 && ln -sf /mnt/samba/ /stage3;
+ [ $? -eq 0 ] || {
+ dialog --msgbox " Could not create symlink " 0 0;
+ umount /mnt/samba;
+ continue;
+ }
+ done
+}
+
+method_http()
+{
+ local url;
+ local ip;
+ while :
+ do
+ http_path=$( dialog --inputbox "Specify HTTP server path for example: http://192.168.0.1/share/ \n HTTP server path " 0 0 "${http_path}" 2>&1 >&3 ) || return 1;
+ [ -z "${http_path}" ] && {
+ dialog --msgbox " Specified HTTP path is invalid... " 0 0;
+ continue;
+ }
+ ip=$(echo $http_path | sed 's/^.*http:\/\///' | cut -f1 -d'/');
+ subdir_path=$( dialog --inputbox "Specify the subdir path for example: http://192.168.0.1/share/Gluster/extensions/ " 0 0 "${subdir_path}" 2>&1 >&3 ) || return 1;
+ [ -z "${subdir_path}" ] && {
+ dialog --msgbox " Specified SUBDIR path is invalid ..." 0 0;
+ continue;
+ }
+ while :
+ do
+ /sbin/ip route get "${ip}";
+ [ $? -eq 0 ] && break;
+ dialog --yesno " $ip is not reachable. configure network? " || break;
+ /etc/stage2/config_network.sh
+ done
+ /sbin/ip route get "${ip}";
+ [ $? -eq 0 ] || continue;
+ done
+}
method_cdrom ()
{
local dev;
@@ -142,10 +265,12 @@ main ()
"Select method to reach gluster stage3" 0 0 0\
"cdrom" "Select Gluster CD/DVD-ROM device"\
"nfs" "NFS mount stage3 extensions" \
+ "samba" "SAMBA mount stage3 extensions" \
"path" "Manually specify stage3 path" 2>&1 >&3) || break;
[ "${method}" = "cdrom" ] && method_cdrom && break;
[ "${method}" = "path" ] && method_path && break;
[ "${method}" = "nfs" ] && method_nfs && break;
+ [ "${method}" = "samba" ] && method_samba && break;
done
exec /etc/stage2/load_stage3.sh /stage3/core.tgz
