Johan Herland <johan@xxxxxxxxxxx> writes:
> On Thursday 26 March 2009, Junio C Hamano wrote:
>> How about doing it like this, instead?
>
> Looks good, and is obviously much less intrusive than my attempt.
>
> There's still one issue as compared to my series: Hook scripts in
> .git/hooks lose their executable bit when copied from template dir.
> You probably need to do some kind of special x-bit handling, similar
> to what's already done for directories.
>
> Other than that:
> Tested-by: Johan Herland <johan@xxxxxxxxxxx>
Sorry to invalidate your Tested-by, but here is a re-roll using a slightly
different strategy.
To fix the loose object codepath, the earlier patch added a call to
adjust_shared_perm() to write_loose_object() function, but after looking
at your 7th patch, I realized that the pattern of file creation inside
$GIT_DIR typically is to first create a temporary file, write to it, and
then finish it off by calling move_temp_to_file(). The true purpose of
the function is to "finalize the file being created", and it is misnamed
in that it describes how its implementation does it currently (i.e. by
renaming the temporary file to its final name), but it makes perfect sense
to call adjust_shared_perm() inside it as a part of finalization. I think
this should cover the codepaths your 7th patch fixed without actually
touching them.
Could you eyeball and re-test it?
-- >8 --
[PATCH] "core.sharedrepository = 0mode" should set, not loosen
This fixes the behaviour of octal notation to how it is defined in the
documentation, while keeping the traditional "loosen only" semantics
intact for "group" and "everybody".
Three main points of this patch are:
- For an explicit octal notation, the internal shared_repository variable
is set to a negative value, so that we can tell "group" (which is to
"OR" in 0660) and 0660 (which is to "SET" to 0660);
- git-init did not set shared_repository variable early enough to affect
the initial creation of many files, notably copied templates and the
configuration. We set it very early when a command-line option
specifies a custom value.
- Many codepaths create files inside $GIT_DIR by various codepaths that
involve mkstemp(), and then call move_temp_to_file() to rename it to
its final destination. We can add adjust_shared_perm() call here; for
the traditional "loosen-only", this would be a no-op for many codepaths
because the mode is already loose enough, but with the new behaviour it
makes a difference.
Signed-off-by: Junio C Hamano <gitster@xxxxxxxxx>
---
builtin-init-db.c | 12 ++++++++++--
path.c | 36 +++++++++++++++++++++---------------
setup.c | 4 ++--
sha1_file.c | 8 +++++++-
t/t1301-shared-repo.sh | 37 +++++++++++++++++++++++++++++++++++++
5 files changed, 77 insertions(+), 20 deletions(-)
diff --git a/builtin-init-db.c b/builtin-init-db.c
index ee3911f..8199e5d 100644
--- a/builtin-init-db.c
+++ b/builtin-init-db.c
@@ -195,6 +195,8 @@ static int create_default_files(const char *template_path)
git_config(git_default_config, NULL);
is_bare_repository_cfg = init_is_bare_repository;
+
+ /* reading existing config may have overwrote it */
if (init_shared_repository != -1)
shared_repository = init_shared_repository;
@@ -313,12 +315,15 @@ int init_db(const char *template_dir, unsigned int flags)
* and compatibility values for PERM_GROUP and
* PERM_EVERYBODY.
*/
- if (shared_repository == PERM_GROUP)
+ if (shared_repository < 0)
+ /* force to the mode value */
+ sprintf(buf, "0%o", -shared_repository);
+ else if (shared_repository == PERM_GROUP)
sprintf(buf, "%d", OLD_PERM_GROUP);
else if (shared_repository == PERM_EVERYBODY)
sprintf(buf, "%d", OLD_PERM_EVERYBODY);
else
- sprintf(buf, "0%o", shared_repository);
+ die("oops");
git_config_set("core.sharedrepository", buf);
git_config_set("receive.denyNonFastforwards", "true");
}
@@ -398,6 +403,9 @@ int cmd_init_db(int argc, const char **argv, const char *prefix)
usage(init_db_usage);
}
+ if (init_shared_repository != -1)
+ shared_repository = init_shared_repository;
+
/*
* GIT_WORK_TREE makes sense only in conjunction with GIT_DIR
* without --bare. Catch the error early.
diff --git a/path.c b/path.c
index e332b50..42898e0 100644
--- a/path.c
+++ b/path.c
@@ -314,33 +314,39 @@ char *enter_repo(char *path, int strict)
int adjust_shared_perm(const char *path)
{
struct stat st;
- int mode;
+ int mode, tweak, shared;
if (!shared_repository)
return 0;
if (lstat(path, &st) < 0)
return -1;
mode = st.st_mode;
-
- if (shared_repository) {
- int tweak = shared_repository;
- if (!(mode & S_IWUSR))
- tweak &= ~0222;
+ if (shared_repository < 0)
+ shared = -shared_repository;
+ else
+ shared = shared_repository;
+ tweak = shared;
+
+ if (!(mode & S_IWUSR))
+ tweak &= ~0222;
+ if (mode & S_IXUSR)
+ /* Copy read bits to execute bits */
+ tweak |= (tweak & 0444) >> 2;
+ if (shared_repository < 0)
+ mode = (mode & ~0777) | tweak;
+ else
mode |= tweak;
- } else {
- /* Preserve old PERM_UMASK behaviour */
- if (mode & S_IWUSR)
- mode |= S_IWGRP;
- }
if (S_ISDIR(mode)) {
- mode |= FORCE_DIR_SET_GID;
-
/* Copy read bits to execute bits */
- mode |= (shared_repository & 0444) >> 2;
+ mode |= (shared & 0444) >> 2;
+ mode |= FORCE_DIR_SET_GID;
}
- if ((mode & st.st_mode) != mode && chmod(path, mode) < 0)
+ if (((shared_repository < 0
+ ? (st.st_mode & (FORCE_DIR_SET_GID | 0777))
+ : (st.st_mode & mode)) != mode) &&
+ chmod(path, mode) < 0)
return -2;
return 0;
}
diff --git a/setup.c b/setup.c
index 6c2deda..ebd60de 100644
--- a/setup.c
+++ b/setup.c
@@ -434,7 +434,7 @@ int git_config_perm(const char *var, const char *value)
/*
* Treat values 0, 1 and 2 as compatibility cases, otherwise it is
- * a chmod value.
+ * a chmod value to restrict to.
*/
switch (i) {
case PERM_UMASK: /* 0 */
@@ -456,7 +456,7 @@ int git_config_perm(const char *var, const char *value)
* Mask filemode value. Others can not get write permission.
* x flags for directories are handled separately.
*/
- return i & 0666;
+ return -(i & 0666);
}
int check_repository_format_version(const char *var, const char *value, void *cb)
diff --git a/sha1_file.c b/sha1_file.c
index a07aa4e..45987bd 100644
--- a/sha1_file.c
+++ b/sha1_file.c
@@ -2243,11 +2243,15 @@ static void write_sha1_file_prepare(const void *buf, unsigned long len,
}
/*
- * Move the just written object into its final resting place
+ * Move the just written object into its final resting place.
+ * NEEDSWORK: this should be renamed to finalize_temp_file() as
+ * "moving" is only a part of what it does, when no patch between
+ * master to pu changes the call sites of this function.
*/
int move_temp_to_file(const char *tmpfile, const char *filename)
{
int ret = 0;
+
if (link(tmpfile, filename))
ret = errno;
@@ -2275,6 +2279,8 @@ int move_temp_to_file(const char *tmpfile, const char *filename)
/* FIXME!!! Collision check here ? */
}
+ if (adjust_shared_perm(filename))
+ return error("unable to set permission to '%s'", filename);
return 0;
}
diff --git a/t/t1301-shared-repo.sh b/t/t1301-shared-repo.sh
index 653362b..d459854 100755
--- a/t/t1301-shared-repo.sh
+++ b/t/t1301-shared-repo.sh
@@ -126,4 +126,41 @@ test_expect_success 'git reflog expire honors core.sharedRepository' '
esac
'
+test_expect_success 'forced modes' '
+ mkdir -p templates/hooks &&
+ echo update-server-info >templates/hooks/post-update &&
+ chmod +x templates/hooks/post-update &&
+ echo : >random-file &&
+ mkdir new &&
+ (
+ cd new &&
+ umask 002 &&
+ git init --shared=0660 --template=../templates &&
+ >frotz &&
+ git add frotz &&
+ git commit -a -m initial &&
+ git repack
+ ) &&
+ find new/.git -print |
+ xargs ls -ld >actual &&
+
+ # Everything must be unaccessible to others
+ test -z "$(sed -n -e "/^.......---/d" actual)" &&
+
+ # All directories must have 2770
+ test -z "$(sed -n -e "/^drwxrws---/d" -e "/^d/p" actual)" &&
+
+ # post-update hook must be 0770
+ test -z "$(sed -n -e "/post-update/{
+ /^-rwxrwx---/d
+ p
+ }" actual)" &&
+
+ # All files inside objects must be 0440
+ test -z "$(sed -n -e "/objects\//{
+ /^d/d
+ /^-r--r-----/d
+ }" actual)"
+'
+
test_done
--
1.6.2.1.394.g50949
--
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
