Currently git over http only works with a .netrc file which required
that you store your password on the file system in plaintext. This
commit adds to configuration options for http for a username and an
optional password. If a http.username is set, then the .netrc file
is ignored and the username is used instead. If a http.password is
set, then that is used as well, otherwise the user is prompted for
their password.
With the old .netrc working, this patch provides backwards
compatibility while adding a more secure option for users whose
http password may be sensitive (such as if its a domain controller
password) and do not wish to have it on the filesystem.
Signed-off-by: Mike Gaffney <mike@xxxxxxxxx>
---
Documentation/config.txt | 7 +++
Documentation/howto/setup-git-server-over-http.txt | 38 ++++++++++++++++--
http.c | 41 ++++++++++++++++++-
http.h | 2 +
4 files changed, 81 insertions(+), 7 deletions(-)
diff --git a/Documentation/config.txt b/Documentation/config.txt
index f5152c5..821bf48 100644
--- a/Documentation/config.txt
+++ b/Documentation/config.txt
@@ -920,6 +920,13 @@ help.autocorrect::
value is 0 - the command will be just shown but not executed.
This is the default.
+http.username, http.password:
+ The username and password for http authentication. http.username is
+ required, http.password is optional. If supplied, the .netrc file will
+ be ignored. If a password is not supplied, git will prompt for it.
+ Be careful when configuring a password as it will be stored in plain text
+ on the filesystem.
+
http.proxy::
Override the HTTP proxy, normally configured using the 'http_proxy'
environment variable (see linkgit:curl[1]). This can be overridden
diff --git a/Documentation/howto/setup-git-server-over-http.txt b/Documentation/howto/setup-git-server-over-http.txt
index 622ee5c..462a9d4 100644
--- a/Documentation/howto/setup-git-server-over-http.txt
+++ b/Documentation/howto/setup-git-server-over-http.txt
@@ -189,8 +189,19 @@ Make sure that you have HTTP support, i.e. your git was built with
libcurl (version more recent than 7.10). The command 'git http-push' with
no argument should display a usage message.
-Then, add the following to your $HOME/.netrc (you can do without, but will be
-asked to input your password a _lot_ of times):
+There are 2 ways to authenticate with git http, netrc and via the git config.
+The netrc option requires that you put the username and password for the connection
+in $HOME/.netrc. The configuration method allows you to specify a username and
+optionally a password. If the password is not supplied then git will prompt you
+for the password. The downside to the netrc method is that you must have your
+username and password in plaintext on the filesystem, albeit in a protected file.
+If the username/password combo is a sensitive one, you may wish to use the
+git config method. The downside of the config method is that you will be prompted
+for your password every time you push or pull to the remote repository.
+
+Using netrc:
+
+Using your favourite ext editor, add the following to your $HOME/.netrc:
machine <servername>
login <username>
@@ -204,7 +215,7 @@ instead of the server name.
To check whether all is OK, do:
- curl --netrc --location -v http://<username>@<servername>/my-new-repo.git/HEAD
+ curl --netrc --location -v http://<servername>/my-new-repo.git/HEAD
...this should give something like 'ref: refs/heads/master', which is
the content of the file HEAD on the server.
@@ -213,12 +224,31 @@ Now, add the remote in your existing repository which contains the project
you want to export:
$ git-config remote.upload.url \
- http://<username>@<servername>/my-new-repo.git/
+ http://<servername>/my-new-repo.git/
It is important to put the last '/'; Without it, the server will send
a redirect which git-http-push does not (yet) understand, and git-http-push
will repeat the request infinitely.
+Using git config:
+
+curl --user <username>:<password> --location -v http://<servername>/my-new-repo.git/HEAD
+
+...this should give something like 'ref: refs/heads/master', which is
+the content of the file HEAD on the server.
+
+Now, add the remote in your existing repository which contains the project
+you want to export:
+
+ $ git-config remote.upload.url \
+ http://<servername>/my-new-repo.git/
+
+Also, add in your username with:
+ $ git-config http.username <username>
+
+And optionally your password (you will be prompted for it if you do not):
+ $ git-config http.password <password>
+
Step 4: make the initial push
-----------------------------
diff --git a/http.c b/http.c
index ee58799..348b9fb 100644
--- a/http.c
+++ b/http.c
@@ -26,6 +26,9 @@ static long curl_low_speed_time = -1;
static int curl_ftp_no_epsv = 0;
static const char *curl_http_proxy = NULL;
+static const char *curl_http_username = NULL;
+static const char *curl_http_password = NULL;
+
static struct curl_slist *pragma_header;
static struct active_request_slot *active_queue_head = NULL;
@@ -153,11 +156,45 @@ static int http_options(const char *var, const char *value, void *cb)
return git_config_string(&curl_http_proxy, var, value);
return 0;
}
+ if (!strcmp("http.username", var)) {
+ if (curl_http_username == NULL)
+ {
+ return git_config_string(&curl_http_username, var, value);
+ }
+ return 0;
+ }
+ if (!strcmp("http.password", var)) {
+ if (curl_http_password == NULL)
+ {
+ return git_config_string(&curl_http_password, var, value);
+ }
+ return 0;
+ }
/* Fall back on the default ones */
return git_default_config(var, value, cb);
}
+static void init_curl_http_auth(CURL* result){
+#if LIBCURL_VERSION_NUM >= 0x070907
+ struct strbuf userpass;
+ strbuf_init(&userpass, 0);
+ if (curl_http_username != NULL) {
+ strbuf_addstr(&userpass, curl_http_username);
+ strbuf_addstr(&userpass, ":");
+ if (curl_http_password != NULL) {
+ strbuf_addstr(&userpass, curl_http_password);
+ } else {
+ strbuf_addstr(&userpass, getpass("Password: "));
+ }
+ curl_easy_setopt(result, CURLOPT_USERPWD, userpass.buf);
+ curl_easy_setopt(result, CURLOPT_NETRC, CURL_NETRC_IGNORED);
+ } else {
+ curl_easy_setopt(result, CURLOPT_NETRC, CURL_NETRC_OPTIONAL);
+ }
+#endif
+}
+
static CURL* get_curl_handle(void)
{
CURL* result = curl_easy_init();
@@ -172,9 +209,7 @@ static CURL* get_curl_handle(void)
curl_easy_setopt(result, CURLOPT_SSL_VERIFYHOST, 2);
}
-#if LIBCURL_VERSION_NUM >= 0x070907
- curl_easy_setopt(result, CURLOPT_NETRC, CURL_NETRC_OPTIONAL);
-#endif
+ init_curl_http_auth(result);
if (ssl_cert != NULL)
curl_easy_setopt(result, CURLOPT_SSLCERT, ssl_cert);
diff --git a/http.h b/http.h
index 905b462..71320d1 100644
--- a/http.h
+++ b/http.h
@@ -5,6 +5,8 @@
#include <curl/curl.h>
#include <curl/easy.h>
+#include <termios.h>
+#include <stdio.h>
#include "strbuf.h"
#include "remote.h"
--
1.6.1.2
--
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
