The options are partitioned into more digestible groups. Within these groups, the options are sorted alphabetically. Signed-off-by: Michael Witten <mfwitten@xxxxxxx> --- Documentation/git-send-email.txt | 119 ++++++++++++++++++++++---------------- 1 files changed, 69 insertions(+), 50 deletions(-) diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt index 8ffe525..82f5056 100644 --- a/Documentation/git-send-email.txt +++ b/Documentation/git-send-email.txt @@ -19,9 +19,12 @@ The header of the email is configurable by command line options. If not specified on the command line, the user will be prompted with a ReadLine enabled interface to provide the necessary information. + OPTIONS ------- -The options available are: + +Composing +~~~~~~~~~ --bcc:: Specify a "Bcc:" value for each email. Default is the value of @@ -34,46 +37,15 @@ The --bcc option must be repeated for each user you want on the bcc list. + The --cc option must be repeated for each user you want on the cc list. ---cc-cmd:: - Specify a command to execute once per patch file which - should generate patch file specific "Cc:" entries. - Output of this command must be single email address per line. - Default is the value of 'sendemail.cccmd' configuration value. - ---[no-]chain-reply-to:: - If this is set, each email will be sent as a reply to the previous - email sent. If disabled with "--no-chain-reply-to", all emails after - the first will be sent as replies to the first email sent. When using - this, it is recommended that the first file given be an overview of the - entire patch series. Default is the value of the 'sendemail.chainreplyto' - configuration value; if that is unspecified, default to --chain-reply-to. - --compose:: Use $GIT_EDITOR, core.editor, $VISUAL, or $EDITOR to edit an introductory message for the patch series. ---dry-run:: - Do everything except actually send the emails. - ---envelope-sender:: - Specify the envelope sender used to send the emails. - This is useful if your default address is not the address that is - subscribed to a list. If you use the sendmail binary, you must have - suitable privileges for the -f parameter. Default is the value of - the 'sendemail.envelopesender' configuration variable; if that is - unspecified, choosing the envelope sender is left to your MTA. - --from:: Specify the sender of the emails. This will default to the value GIT_COMMITTER_IDENT, as returned by "git var -l". The user will still be prompted to confirm this entry. ---identity:: - A configuration identity. When given, causes values in the - 'sendemail.<identity>' subsection to take precedence over - values in the 'sendemail' section. The default identity is - the value of 'sendemail.identity'. - --in-reply-to:: Specify the contents of the first In-Reply-To header. Subsequent emails will refer to the previous email @@ -81,14 +53,30 @@ The --cc option must be repeated for each user you want on the cc list. Only necessary if --compose is also set. If --compose is not set, this will be prompted for. ---quiet:: - Make git-send-email less verbose. One line per email should be - all that is output. +--subject:: + Specify the initial subject of the email thread. + Only necessary if --compose is also set. If --compose + is not set, this will be prompted for. ---[no-]signed-off-by-cc:: - If this is set, add emails found in Signed-off-by: or Cc: lines to the - cc list. Default is the value of 'sendemail.signedoffbycc' configuration - value; if that is unspecified, default to --signed-off-by-cc. +--to:: + Specify the primary recipient of the emails generated. Generally, this + will be the upstream maintainer of the project involved. Default is the + value of the 'sendemail.to' configuration value; if that is unspecified, + this will be prompted for. ++ +The --to option must be repeated for each user you want on the to list. + + +Sending +~~~~~~~ + +--envelope-sender:: + Specify the envelope sender used to send the emails. + This is useful if your default address is not the address that is + subscribed to a list. If you use the sendmail binary, you must have + suitable privileges for the -f parameter. Default is the value of + the 'sendemail.envelopesender' configuration variable; if that is + unspecified, choosing the envelope sender is left to your MTA. --smtp-encryption:: Specify the encryption to use, either 'ssl' or 'tls'. Any other @@ -130,10 +118,34 @@ user is prompted for a password while the input is masked for privacy. if a username is not specified (with '--smtp-user' or 'sendemail.smtpuser'), then authentication is not attempted. ---subject:: - Specify the initial subject of the email thread. - Only necessary if --compose is also set. If --compose - is not set, this will be prompted for. + +Automating +~~~~~~~~~~ + +--cc-cmd:: + Specify a command to execute once per patch file which + should generate patch file specific "Cc:" entries. + Output of this command must be single email address per line. + Default is the value of 'sendemail.cccmd' configuration value. + +--[no-]chain-reply-to:: + If this is set, each email will be sent as a reply to the previous + email sent. If disabled with "--no-chain-reply-to", all emails after + the first will be sent as replies to the first email sent. When using + this, it is recommended that the first file given be an overview of the + entire patch series. Default is the value of the 'sendemail.chainreplyto' + configuration value; if that is unspecified, default to --chain-reply-to. + +--identity:: + A configuration identity. When given, causes values in the + 'sendemail.<identity>' subsection to take precedence over + values in the 'sendemail' section. The default identity is + the value of 'sendemail.identity'. + +--[no-]signed-off-by-cc:: + If this is set, add emails found in Signed-off-by: or Cc: lines to the + cc list. Default is the value of 'sendemail.signedoffbycc' configuration + value; if that is unspecified, default to --signed-off-by-cc. --suppress-cc:: Specify an additional category of recipients to suppress the @@ -157,13 +169,16 @@ user is prompted for a password while the input is masked for privacy. header set. Default is the value of the 'sendemail.thread' configuration value; if that is unspecified, default to --thread. ---to:: - Specify the primary recipient of the emails generated. Generally, this - will be the upstream maintainer of the project involved. Default is the - value of the 'sendemail.to' configuration value; if that is unspecified, - this will be prompted for. -+ -The --to option must be repeated for each user you want on the to list. + +Administering +~~~~~~~~~~~~~ + +--dry-run:: + Do everything except actually send the emails. + +--quiet:: + Make git-send-email less verbose. One line per email should be + all that is output. --[no-]validate:: Perform sanity checks on patches. @@ -180,6 +195,7 @@ default to '--validate'. CONFIGURATION ------------- + sendemail.aliasesfile:: To avoid typing long email addresses, point this to one or more email aliases files. You must also supply 'sendemail.aliasfiletype'. @@ -188,6 +204,7 @@ sendemail.aliasfiletype:: Format of the file(s) specified in sendemail.aliasesfile. Must be one of 'mutt', 'mailrc', 'pine', or 'gnus'. + Author ------ Written by Ryan Anderson <ryan@xxxxxxxxxxxxxx> @@ -195,10 +212,12 @@ Written by Ryan Anderson <ryan@xxxxxxxxxxxxxx> git-send-email is originally based upon send_lots_of_email.pl by Greg Kroah-Hartman. + Documentation -------------- Documentation by Ryan Anderson + GIT --- Part of the linkgit:git[1] suite -- 1.6.0.2.304.gdcf23.dirty -- To unsubscribe from this list: send the line "unsubscribe git" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
