Replace the "This manual page describes only the most frequently used options."
text with the list of rev-list options in git-log manpage. (The git-diff-tree
options are already included.)
Move these options to a separate file and include it from both
git-rev-list.txt and git-log.txt.
Signed-off-by: Miklos Vajna <vmiklos@xxxxxxxxxxxxxx>
---
On Thu, Jan 17, 2008 at 11:21:27PM -0800, Junio C Hamano <gitster@xxxxxxxxx> wrote:
> Have you generated documentation with and without patch and run
> diff between them?
Yes and no. I generated the documentation, but I forgot to diff the
result with the old one. :-/
> There is an obvious duplicated inclusion of pretty-options.txt[]
> in git-log.{1,html}.
I missed that one. Now should be fixed. Also there were other duplicated
options like --first-parent and -g.
> In addition, this part
>
> > -Commit Formatting
> > -~~~~~~~~~~~~~~~~~
> > -
> > -Using these options, linkgit:git-rev-list[1] will act similar to the
> > -more specialized family of commit log tools: linkgit:git-log[1],
> > -linkgit:git-show[1], and linkgit:git-whatchanged[1]
>
> is _clearly_ written for git-rev-list and unsuitable for any of
> the commands listed above.
Fixed. Also the other occurences, like --objects, where the text was
specific to rev-list as well.
> git-log manual page has been saying that "This manual page
> describes only the most frequently used options." I would agree
> that it is a laudable goal to replace that sentence with an
> included common source text, but there needs to be a bit more
> careful copyediting than your a patch.
As the git-diff-tree options were already included, and this patch
adds the git-rev-list options, I removed this text.
Documentation/git-log.txt | 6 +-
Documentation/git-rev-list.txt | 358 +-----------------------------------
Documentation/rev-list-options.txt | 364 ++++++++++++++++++++++++++++++++++++
3 files changed, 367 insertions(+), 361 deletions(-)
create mode 100644 Documentation/rev-list-options.txt
diff --git a/Documentation/git-log.txt b/Documentation/git-log.txt
index 5985f47..e981618 100644
--- a/Documentation/git-log.txt
+++ b/Documentation/git-log.txt
@@ -19,14 +19,10 @@ command to control what is shown and how, and options applicable to
the linkgit:git-diff-tree[1] commands to control how the changes
each commit introduces are shown.
-This manual page describes only the most frequently used options.
-
OPTIONS
-------
-include::pretty-options.txt[]
-
:git-log: 1
include::diff-options.txt[]
@@ -80,6 +76,8 @@ include::diff-options.txt[]
Show only commits that affect the specified paths.
+include::rev-list-options.txt[]
+
include::pretty-formats.txt[]
include::diff-generate-patch.txt[]
diff --git a/Documentation/git-rev-list.txt b/Documentation/git-rev-list.txt
index db42cd8..6a4b0cf 100644
--- a/Documentation/git-rev-list.txt
+++ b/Documentation/git-rev-list.txt
@@ -88,363 +88,7 @@ linkgit:git-repack[1].
OPTIONS
-------
-Commit Formatting
-~~~~~~~~~~~~~~~~~
-
-Using these options, linkgit:git-rev-list[1] will act similar to the
-more specialized family of commit log tools: linkgit:git-log[1],
-linkgit:git-show[1], and linkgit:git-whatchanged[1]
-
-include::pretty-options.txt[]
-
---relative-date::
-
- Synonym for `--date=relative`.
-
---date={relative,local,default,iso,rfc}::
-
- Only takes effect for dates shown in human-readable format, such
- as when using "--pretty".
-+
-`--date=relative` shows dates relative to the current time,
-e.g. "2 hours ago".
-+
-`--date=local` shows timestamps in user's local timezone.
-+
-`--date=iso` (or `--date=iso8601`) shows timestamps in ISO 8601 format.
-+
-`--date=rfc` (or `--date=rfc2822`) shows timestamps in RFC 2822
-format, often found in E-mail messages.
-+
-`--date=short` shows only date but not time, in `YYYY-MM-DD` format.
-+
-`--date=default` shows timestamps in the original timezone
-(either committer's or author's).
-
---header::
-
- Print the contents of the commit in raw-format; each record is
- separated with a NUL character.
-
---parents::
-
- Print the parents of the commit.
-
---timestamp::
- Print the raw commit timestamp.
-
---left-right::
-
- Mark which side of a symmetric diff a commit is reachable from.
- Commits from the left side are prefixed with `<` and those from
- the right with `>`. If combined with `--boundary`, those
- commits are prefixed with `-`.
-+
-For example, if you have this topology:
-+
------------------------------------------------------------------------
- y---b---b branch B
- / \ /
- / .
- / / \
- o---x---a---a branch A
------------------------------------------------------------------------
-+
-you would get an output line this:
-+
------------------------------------------------------------------------
- $ git rev-list --left-right --boundary --pretty=oneline A...B
-
- >bbbbbbb... 3rd on b
- >bbbbbbb... 2nd on b
- <aaaaaaa... 3rd on a
- <aaaaaaa... 2nd on a
- -yyyyyyy... 1st on b
- -xxxxxxx... 1st on a
------------------------------------------------------------------------
-
-Diff Formatting
-~~~~~~~~~~~~~~~
-
-Below are listed options that control the formatting of diff output.
-Some of them are specific to linkgit:git-rev-list[1], however other diff
-options may be given. See linkgit:git-diff-files[1] for more options.
-
--c::
-
- This flag changes the way a merge commit is displayed. It shows
- the differences from each of the parents to the merge result
- simultaneously instead of showing pairwise diff between a parent
- and the result one at a time. Furthermore, it lists only files
- which were modified from all parents.
-
---cc::
-
- This flag implies the '-c' options and further compresses the
- patch output by omitting hunks that show differences from only
- one parent, or show the same change from all but one parent for
- an Octopus merge.
-
--r::
-
- Show recursive diffs.
-
--t::
-
- Show the tree objects in the diff output. This implies '-r'.
-
-Commit Limiting
-~~~~~~~~~~~~~~~
-
-Besides specifying a range of commits that should be listed using the
-special notations explained in the description, additional commit
-limiting may be applied.
-
---
-
--n 'number', --max-count='number'::
-
- Limit the number of commits output.
-
---skip='number'::
-
- Skip 'number' commits before starting to show the commit output.
-
---since='date', --after='date'::
-
- Show commits more recent than a specific date.
-
---until='date', --before='date'::
-
- Show commits older than a specific date.
-
---max-age='timestamp', --min-age='timestamp'::
-
- Limit the commits output to specified time range.
-
---author='pattern', --committer='pattern'::
-
- Limit the commits output to ones with author/committer
- header lines that match the specified pattern (regular expression).
-
---grep='pattern'::
-
- Limit the commits output to ones with log message that
- matches the specified pattern (regular expression).
-
--i, --regexp-ignore-case::
-
- Match the regexp limiting patterns without regard to letters case.
-
--E, --extended-regexp::
-
- Consider the limiting patterns to be extended regular expressions
- instead of the default basic regular expressions.
-
---remove-empty::
-
- Stop when a given path disappears from the tree.
-
---full-history::
-
- Show also parts of history irrelevant to current state of a given
- path. This turns off history simplification, which removed merges
- which didn't change anything at all at some child. It will still actually
- simplify away merges that didn't change anything at all into either
- child.
-
---no-merges::
-
- Do not print commits with more than one parent.
-
---first-parent::
- Follow only the first parent commit upon seeing a merge
- commit. This option can give a better overview when
- viewing the evolution of a particular topic branch,
- because merges into a topic branch tend to be only about
- adjusting to updated upstream from time to time, and
- this option allows you to ignore the individual commits
- brought in to your history by such a merge.
-
---not::
-
- Reverses the meaning of the '{caret}' prefix (or lack thereof)
- for all following revision specifiers, up to the next '--not'.
-
---all::
-
- Pretend as if all the refs in `$GIT_DIR/refs/` are listed on the
- command line as '<commit>'.
-
---stdin::
-
- In addition to the '<commit>' listed on the command
- line, read them from the standard input.
-
---quiet::
-
- Don't print anything to standard output. This form of
- git-rev-list is primarily meant to allow the caller to
- test the exit status to see if a range of objects is fully
- connected (or not). It is faster than redirecting stdout
- to /dev/null as the output does not have to be formatted.
-
---cherry-pick::
-
- Omit any commit that introduces the same change as
- another commit on the "other side" when the set of
- commits are limited with symmetric difference.
-+
-For example, if you have two branches, `A` and `B`, a usual way
-to list all commits on only one side of them is with
-`--left-right`, like the example above in the description of
-that option. It however shows the commits that were cherry-picked
-from the other branch (for example, "3rd on b" may be cherry-picked
-from branch A). With this option, such pairs of commits are
-excluded from the output.
-
--g, --walk-reflogs::
-
- Instead of walking the commit ancestry chain, walk
- reflog entries from the most recent one to older ones.
- When this option is used you cannot specify commits to
- exclude (that is, '{caret}commit', 'commit1..commit2',
- nor 'commit1...commit2' notations cannot be used).
-+
-With '\--pretty' format other than oneline (for obvious reasons),
-this causes the output to have two extra lines of information
-taken from the reflog. By default, 'commit@\{Nth}' notation is
-used in the output. When the starting commit is specified as
-'commit@{now}', output also uses 'commit@\{timestamp}' notation
-instead. Under '\--pretty=oneline', the commit message is
-prefixed with this information on the same line.
-
-Cannot be combined with '\--reverse'.
-
---merge::
-
- After a failed merge, show refs that touch files having a
- conflict and don't exist on all heads to merge.
-
---boundary::
-
- Output uninteresting commits at the boundary, which are usually
- not shown.
-
---dense, --sparse::
-
-When optional paths are given, the default behaviour ('--dense') is to
-only output commits that changes at least one of them, and also ignore
-merges that do not touch the given paths.
-
-Use the '--sparse' flag to makes the command output all eligible commits
-(still subject to count and age limitation), but apply merge
-simplification nevertheless.
-
---bisect::
-
-Limit output to the one commit object which is roughly halfway between
-the included and excluded commits. Thus, if
-
------------------------------------------------------------------------
- $ git-rev-list --bisect foo ^bar ^baz
------------------------------------------------------------------------
-
-outputs 'midpoint', the output of the two commands
-
------------------------------------------------------------------------
- $ git-rev-list foo ^midpoint
- $ git-rev-list midpoint ^bar ^baz
------------------------------------------------------------------------
-
-would be of roughly the same length. Finding the change which
-introduces a regression is thus reduced to a binary search: repeatedly
-generate and test new 'midpoint's until the commit chain is of length
-one.
-
---bisect-vars::
-
-This calculates the same as `--bisect`, but outputs text ready
-to be eval'ed by the shell. These lines will assign the name of
-the midpoint revision to the variable `bisect_rev`, and the
-expected number of commits to be tested after `bisect_rev` is
-tested to `bisect_nr`, the expected number of commits to be
-tested if `bisect_rev` turns out to be good to `bisect_good`,
-the expected number of commits to be tested if `bisect_rev`
-turns out to be bad to `bisect_bad`, and the number of commits
-we are bisecting right now to `bisect_all`.
-
---bisect-all::
-
-This outputs all the commit objects between the included and excluded
-commits, ordered by their distance to the included and excluded
-commits. The farthest from them is displayed first. (This is the only
-one displayed by `--bisect`.)
-
-This is useful because it makes it easy to choose a good commit to
-test when you want to avoid to test some of them for some reason (they
-may not compile for example).
-
-This option can be used along with `--bisect-vars`, in this case,
-after all the sorted commit objects, there will be the same text as if
-`--bisect-vars` had been used alone.
-
---
-
-Commit Ordering
-~~~~~~~~~~~~~~~
-
-By default, the commits are shown in reverse chronological order.
-
---topo-order::
-
- This option makes them appear in topological order (i.e.
- descendant commits are shown before their parents).
-
---date-order::
-
- This option is similar to '--topo-order' in the sense that no
- parent comes before all of its children, but otherwise things
- are still ordered in the commit timestamp order.
-
---reverse::
-
- Output the commits in reverse order.
- Cannot be combined with '\--walk-reflogs'.
-
-Object Traversal
-~~~~~~~~~~~~~~~~
-
-These options are mostly targeted for packing of git repositories.
-
---objects::
-
- Print the object IDs of any object referenced by the listed
- commits. 'git-rev-list --objects foo ^bar' thus means "send me
- all object IDs which I need to download if I have the commit
- object 'bar', but not 'foo'".
-
---objects-edge::
-
- Similar to '--objects', but also print the IDs of excluded
- commits prefixed with a "-" character. This is used by
- linkgit:git-pack-objects[1] to build "thin" pack, which records
- objects in deltified form based on objects contained in these
- excluded commits to reduce network traffic.
-
---unpacked::
-
- Only useful with '--objects'; print the object IDs that are not
- in packs.
-
---no-walk::
-
- Only show the given revs, but do not traverse their ancestors.
-
---do-walk::
-
- Overrides a previous --no-walk.
-
+include::rev-list-options.txt[]
include::pretty-formats.txt[]
diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt
new file mode 100644
index 0000000..1b0bc27
--- /dev/null
+++ b/Documentation/rev-list-options.txt
@@ -0,0 +1,364 @@
+Commit Formatting
+~~~~~~~~~~~~~~~~~
+
+ifndef::git-log[]
+Using these options, linkgit:git-rev-list[1] will act similar to the
+more specialized family of commit log tools: linkgit:git-log[1],
+linkgit:git-show[1], and linkgit:git-whatchanged[1]
+endif::git-log[]
+
+include::pretty-options.txt[]
+
+--relative-date::
+
+ Synonym for `--date=relative`.
+
+--date={relative,local,default,iso,rfc}::
+
+ Only takes effect for dates shown in human-readable format, such
+ as when using "--pretty".
++
+`--date=relative` shows dates relative to the current time,
+e.g. "2 hours ago".
++
+`--date=local` shows timestamps in user's local timezone.
++
+`--date=iso` (or `--date=iso8601`) shows timestamps in ISO 8601 format.
++
+`--date=rfc` (or `--date=rfc2822`) shows timestamps in RFC 2822
+format, often found in E-mail messages.
++
+`--date=short` shows only date but not time, in `YYYY-MM-DD` format.
++
+`--date=default` shows timestamps in the original timezone
+(either committer's or author's).
+
+--header::
+
+ Print the contents of the commit in raw-format; each record is
+ separated with a NUL character.
+
+--parents::
+
+ Print the parents of the commit.
+
+--timestamp::
+ Print the raw commit timestamp.
+
+--left-right::
+
+ Mark which side of a symmetric diff a commit is reachable from.
+ Commits from the left side are prefixed with `<` and those from
+ the right with `>`. If combined with `--boundary`, those
+ commits are prefixed with `-`.
++
+For example, if you have this topology:
++
+-----------------------------------------------------------------------
+ y---b---b branch B
+ / \ /
+ / .
+ / / \
+ o---x---a---a branch A
+-----------------------------------------------------------------------
++
+you would get an output line this:
++
+-----------------------------------------------------------------------
+ $ git rev-list --left-right --boundary --pretty=oneline A...B
+
+ >bbbbbbb... 3rd on b
+ >bbbbbbb... 2nd on b
+ <aaaaaaa... 3rd on a
+ <aaaaaaa... 2nd on a
+ -yyyyyyy... 1st on b
+ -xxxxxxx... 1st on a
+-----------------------------------------------------------------------
+
+Diff Formatting
+~~~~~~~~~~~~~~~
+
+Below are listed options that control the formatting of diff output.
+Some of them are specific to linkgit:git-rev-list[1], however other diff
+options may be given. See linkgit:git-diff-files[1] for more options.
+
+-c::
+
+ This flag changes the way a merge commit is displayed. It shows
+ the differences from each of the parents to the merge result
+ simultaneously instead of showing pairwise diff between a parent
+ and the result one at a time. Furthermore, it lists only files
+ which were modified from all parents.
+
+--cc::
+
+ This flag implies the '-c' options and further compresses the
+ patch output by omitting hunks that show differences from only
+ one parent, or show the same change from all but one parent for
+ an Octopus merge.
+
+-r::
+
+ Show recursive diffs.
+
+-t::
+
+ Show the tree objects in the diff output. This implies '-r'.
+
+Commit Limiting
+~~~~~~~~~~~~~~~
+
+Besides specifying a range of commits that should be listed using the
+special notations explained in the description, additional commit
+limiting may be applied.
+
+--
+
+-n 'number', --max-count='number'::
+
+ Limit the number of commits output.
+
+--skip='number'::
+
+ Skip 'number' commits before starting to show the commit output.
+
+--since='date', --after='date'::
+
+ Show commits more recent than a specific date.
+
+--until='date', --before='date'::
+
+ Show commits older than a specific date.
+
+--max-age='timestamp', --min-age='timestamp'::
+
+ Limit the commits output to specified time range.
+
+--author='pattern', --committer='pattern'::
+
+ Limit the commits output to ones with author/committer
+ header lines that match the specified pattern (regular expression).
+
+--grep='pattern'::
+
+ Limit the commits output to ones with log message that
+ matches the specified pattern (regular expression).
+
+-i, --regexp-ignore-case::
+
+ Match the regexp limiting patterns without regard to letters case.
+
+-E, --extended-regexp::
+
+ Consider the limiting patterns to be extended regular expressions
+ instead of the default basic regular expressions.
+
+--remove-empty::
+
+ Stop when a given path disappears from the tree.
+
+--full-history::
+
+ Show also parts of history irrelevant to current state of a given
+ path. This turns off history simplification, which removed merges
+ which didn't change anything at all at some child. It will still actually
+ simplify away merges that didn't change anything at all into either
+ child.
+
+--no-merges::
+
+ Do not print commits with more than one parent.
+
+ifndef::git-log[]
+--first-parent::
+ Follow only the first parent commit upon seeing a merge
+ commit. This option can give a better overview when
+ viewing the evolution of a particular topic branch,
+ because merges into a topic branch tend to be only about
+ adjusting to updated upstream from time to time, and
+ this option allows you to ignore the individual commits
+ brought in to your history by such a merge.
+endif::git-log[]
+
+--not::
+
+ Reverses the meaning of the '{caret}' prefix (or lack thereof)
+ for all following revision specifiers, up to the next '--not'.
+
+--all::
+
+ Pretend as if all the refs in `$GIT_DIR/refs/` are listed on the
+ command line as '<commit>'.
+
+--stdin::
+
+ In addition to the '<commit>' listed on the command
+ line, read them from the standard input.
+
+--quiet::
+
+ Don't print anything to standard output. This form
+ is primarily meant to allow the caller to
+ test the exit status to see if a range of objects is fully
+ connected (or not). It is faster than redirecting stdout
+ to /dev/null as the output does not have to be formatted.
+
+--cherry-pick::
+
+ Omit any commit that introduces the same change as
+ another commit on the "other side" when the set of
+ commits are limited with symmetric difference.
++
+For example, if you have two branches, `A` and `B`, a usual way
+to list all commits on only one side of them is with
+`--left-right`, like the example above in the description of
+that option. It however shows the commits that were cherry-picked
+from the other branch (for example, "3rd on b" may be cherry-picked
+from branch A). With this option, such pairs of commits are
+excluded from the output.
+
+ifndef::git-log[]
+-g, --walk-reflogs::
+
+ Instead of walking the commit ancestry chain, walk
+ reflog entries from the most recent one to older ones.
+ When this option is used you cannot specify commits to
+ exclude (that is, '{caret}commit', 'commit1..commit2',
+ nor 'commit1...commit2' notations cannot be used).
++
+With '\--pretty' format other than oneline (for obvious reasons),
+this causes the output to have two extra lines of information
+taken from the reflog. By default, 'commit@\{Nth}' notation is
+used in the output. When the starting commit is specified as
+'commit@{now}', output also uses 'commit@\{timestamp}' notation
+instead. Under '\--pretty=oneline', the commit message is
+prefixed with this information on the same line.
+
+Cannot be combined with '\--reverse'.
+endif::git-log[]
+
+--merge::
+
+ After a failed merge, show refs that touch files having a
+ conflict and don't exist on all heads to merge.
+
+--boundary::
+
+ Output uninteresting commits at the boundary, which are usually
+ not shown.
+
+--dense, --sparse::
+
+When optional paths are given, the default behaviour ('--dense') is to
+only output commits that changes at least one of them, and also ignore
+merges that do not touch the given paths.
+
+Use the '--sparse' flag to makes the command output all eligible commits
+(still subject to count and age limitation), but apply merge
+simplification nevertheless.
+
+ifndef::git-log[]
+--bisect::
+
+Limit output to the one commit object which is roughly halfway between
+the included and excluded commits. Thus, if
+
+-----------------------------------------------------------------------
+ $ git-rev-list --bisect foo ^bar ^baz
+-----------------------------------------------------------------------
+
+outputs 'midpoint', the output of the two commands
+
+-----------------------------------------------------------------------
+ $ git-rev-list foo ^midpoint
+ $ git-rev-list midpoint ^bar ^baz
+-----------------------------------------------------------------------
+
+would be of roughly the same length. Finding the change which
+introduces a regression is thus reduced to a binary search: repeatedly
+generate and test new 'midpoint's until the commit chain is of length
+one.
+
+--bisect-vars::
+
+This calculates the same as `--bisect`, but outputs text ready
+to be eval'ed by the shell. These lines will assign the name of
+the midpoint revision to the variable `bisect_rev`, and the
+expected number of commits to be tested after `bisect_rev` is
+tested to `bisect_nr`, the expected number of commits to be
+tested if `bisect_rev` turns out to be good to `bisect_good`,
+the expected number of commits to be tested if `bisect_rev`
+turns out to be bad to `bisect_bad`, and the number of commits
+we are bisecting right now to `bisect_all`.
+
+--bisect-all::
+
+This outputs all the commit objects between the included and excluded
+commits, ordered by their distance to the included and excluded
+commits. The farthest from them is displayed first. (This is the only
+one displayed by `--bisect`.)
+
+This is useful because it makes it easy to choose a good commit to
+test when you want to avoid to test some of them for some reason (they
+may not compile for example).
+
+This option can be used along with `--bisect-vars`, in this case,
+after all the sorted commit objects, there will be the same text as if
+`--bisect-vars` had been used alone.
+endif::git-log[]
+
+--
+
+Commit Ordering
+~~~~~~~~~~~~~~~
+
+By default, the commits are shown in reverse chronological order.
+
+--topo-order::
+
+ This option makes them appear in topological order (i.e.
+ descendant commits are shown before their parents).
+
+--date-order::
+
+ This option is similar to '--topo-order' in the sense that no
+ parent comes before all of its children, but otherwise things
+ are still ordered in the commit timestamp order.
+
+--reverse::
+
+ Output the commits in reverse order.
+ Cannot be combined with '\--walk-reflogs'.
+
+Object Traversal
+~~~~~~~~~~~~~~~~
+
+These options are mostly targeted for packing of git repositories.
+
+--objects::
+
+ Print the object IDs of any object referenced by the listed
+ commits. '--objects foo ^bar' thus means "send me
+ all object IDs which I need to download if I have the commit
+ object 'bar', but not 'foo'".
+
+--objects-edge::
+
+ Similar to '--objects', but also print the IDs of excluded
+ commits prefixed with a "-" character. This is used by
+ linkgit:git-pack-objects[1] to build "thin" pack, which records
+ objects in deltified form based on objects contained in these
+ excluded commits to reduce network traffic.
+
+--unpacked::
+
+ Only useful with '--objects'; print the object IDs that are not
+ in packs.
+
+--no-walk::
+
+ Only show the given revs, but do not traverse their ancestors.
+
+--do-walk::
+
+ Overrides a previous --no-walk.
--
1.5.4.rc3.4.g16335-dirty
-
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
