This allows to display a set of refs, when the refs in the set may
themselves change between two refresh operations (eg. the set of
patches in a patch stack), and is expected to be called from other
porcelain suites.
The command is expected to generate a list of commits, which will be
appended to the commits litterally passed on the command-line. That
command is handled similarly to the litteral refs, and has its own
field in the saved view, and an edit field in the view editor.
Signed-off-by: Yann Dirson <ydirson@xxxxxxxxxx>
---
Documentation/gitk.txt | 7 +++++++
gitk | 50 ++++++++++++++++++++++++++++++++++++++----------
2 files changed, 47 insertions(+), 10 deletions(-)
diff --git a/Documentation/gitk.txt b/Documentation/gitk.txt
index 8dbfb0d..f1f3410 100644
--- a/Documentation/gitk.txt
+++ b/Documentation/gitk.txt
@@ -41,6 +41,13 @@ frequently used options.
Show all branches.
+--argscmd=<command>::
+ Command to be run each time gitk has to determine the list of
+ <revs> to show. The command is expected to print on its standard
+ output a list of additional revs to be shown, one per line.
+ Use this instead of explicitly specifying <revs> if the set of
+ commits to show may vary between refreshes.
+
<revs>::
Limit the revisions to show. This can be either a single revision
diff --git a/gitk b/gitk
index 1da0b0a..aba9100 100755
--- a/gitk
+++ b/gitk
@@ -82,7 +82,7 @@ proc dorunq {} {
proc start_rev_list {view} {
global startmsecs
global commfd leftover tclencoding datemode
- global viewargs viewfiles commitidx viewcomplete vnextroot
+ global viewargs viewargscmd viewfiles commitidx viewcomplete vnextroot
global showlocalchanges commitinterest mainheadid
global progressdirn progresscoords proglastnc curview
@@ -90,13 +90,23 @@ proc start_rev_list {view} {
set commitidx($view) 0
set viewcomplete($view) 0
set vnextroot($view) 0
+ set args $viewargs($view)
+ if {$viewargscmd($view) ne {}} {
+ if {[catch {
+ set str [exec sh -c $viewargscmd($view)]
+ } err]} {
+ error_popup "Error executing --argscmd command: $err"
+ exit 1
+ }
+ set args [concat $args [split $str "\n"]]
+ }
set order "--topo-order"
if {$datemode} {
set order "--date-order"
}
if {[catch {
set fd [open [concat | git log --no-color -z --pretty=raw $order --parents \
- --boundary $viewargs($view) "--" $viewfiles($view)] r]
+ --boundary $args "--" $viewfiles($view)] r]
} err]} {
error_popup "Error executing git rev-list: $err"
exit 1
@@ -1154,7 +1164,7 @@ proc savestuff {w} {
global canv canv2 canv3 mainfont textfont uifont tabstop
global stuffsaved findmergefiles maxgraphpct
global maxwidth showneartags showlocalchanges
- global viewname viewfiles viewargs viewperm nextviewnum
+ global viewname viewfiles viewargs viewargscmd viewperm nextviewnum
global cmitmode wrapcomment datetimeformat limitdiffs
global colors bgcolor fgcolor diffcolors diffcontext selectbgcolor
@@ -1193,7 +1203,7 @@ proc savestuff {w} {
puts -nonewline $f "set permviews {"
for {set v 0} {$v < $nextviewnum} {incr v} {
if {$viewperm($v)} {
- puts $f "{[list $viewname($v) $viewfiles($v) $viewargs($v)]}"
+ puts $f "{[list $viewname($v) $viewfiles($v) $viewargs($v) $viewargscmd($v)]}"
}
}
puts $f "}"
@@ -1849,7 +1859,7 @@ proc shellsplit {str} {
proc newview {ishighlight} {
global nextviewnum newviewname newviewperm uifont newishighlight
- global newviewargs revtreeargs
+ global newviewargs revtreeargs viewargscmd newviewargscmd curview
set newishighlight $ishighlight
set top .gitkview
@@ -1860,13 +1870,14 @@ proc newview {ishighlight} {
set newviewname($nextviewnum) "View $nextviewnum"
set newviewperm($nextviewnum) 0
set newviewargs($nextviewnum) [shellarglist $revtreeargs]
+ set newviewargscmd($nextviewnum) $viewargscmd($curview)
vieweditor $top $nextviewnum "Gitk view definition"
}
proc editview {} {
global curview
global viewname viewperm newviewname newviewperm
- global viewargs newviewargs
+ global viewargs newviewargs viewargscmd newviewargscmd
set top .gitkvedit-$curview
if {[winfo exists $top]} {
@@ -1876,6 +1887,7 @@ proc editview {} {
set newviewname($curview) $viewname($curview)
set newviewperm($curview) $viewperm($curview)
set newviewargs($curview) [shellarglist $viewargs($curview)]
+ set newviewargscmd($curview) $viewargscmd($curview)
vieweditor $top $curview "Gitk: edit view $viewname($curview)"
}
@@ -1896,7 +1908,15 @@ proc vieweditor {top n title} {
grid $top.al - -sticky w -pady 5
entry $top.args -width 50 -textvariable newviewargs($n) \
-background white -font uifont
+
grid $top.args - -sticky ew -padx 5
+ message $top.ac -aspect 1000 -font uifont \
+ -text "Command to generate more commits to include:"
+ grid $top.ac - -sticky w -pady 5
+ entry $top.argscmd -width 50 -textvariable newviewargscmd($n) \
+ -background white -font uifont
+
+ grid $top.argscmd - -sticky ew -padx 5
message $top.l -aspect 1000 -font uifont \
-text "Enter files and directories to include, one per line:"
grid $top.l - -sticky w
@@ -1942,7 +1962,7 @@ proc allviewmenus {n op args} {
proc newviewok {top n} {
global nextviewnum newviewperm newviewname newishighlight
global viewname viewfiles viewperm selectedview curview
- global viewargs newviewargs viewhlmenu
+ global viewargs newviewargs viewargscmd newviewargscmd viewhlmenu
if {[catch {
set newargs [shellsplit $newviewargs($n)]
@@ -1966,6 +1986,7 @@ proc newviewok {top n} {
set viewperm($n) $newviewperm($n)
set viewfiles($n) $files
set viewargs($n) $newargs
+ set viewargscmd($n) $newviewargscmd($n)
addviewmenu $n
if {!$newishighlight} {
run showview $n
@@ -1982,9 +2003,11 @@ proc newviewok {top n} {
# doviewmenu $viewhlmenu 1 [list addvhighlight $n] \
# entryconf [list -label $viewname($n) -value $viewname($n)]
}
- if {$files ne $viewfiles($n) || $newargs ne $viewargs($n)} {
+ if {$files ne $viewfiles($n) || $newargs ne $viewargs($n) || \
+ $newviewargscmd($n) ne $viewargscmd($n)} {
set viewfiles($n) $files
set viewargs($n) $newargs
+ set viewargscmd($n) $newviewargscmd($n)
if {$curview == $n} {
run updatecommits
}
@@ -8505,8 +8528,9 @@ set mergeonly 0
set revtreeargs {}
set cmdline_files {}
set i 0
+set revtreeargscmd {}
foreach arg $argv {
- switch -- $arg {
+ switch -glob -- $arg {
"" { }
"-d" { set datemode 1 }
"--merge" {
@@ -8517,6 +8541,9 @@ foreach arg $argv {
set cmdline_files [lrange $argv [expr {$i + 1}] end]
break
}
+ "--argscmd=*" {
+ set revtreeargscmd [string range $arg 10 end]
+ }
default {
lappend revtreeargs $arg
}
@@ -8618,6 +8645,7 @@ set highlight_files {}
set viewfiles(0) {}
set viewperm(0) 0
set viewargs(0) {}
+set viewargscmd(0) {}
set cmdlineok 0
set stopped 0
@@ -8633,7 +8661,7 @@ tkwait visibility .
wm title . "[file tail $argv0]: [file tail [pwd]]"
readrefs
-if {$cmdline_files ne {} || $revtreeargs ne {}} {
+if {$cmdline_files ne {} || $revtreeargs ne {} || $revtreeargscmd ne {}} {
# create a view for the files/dirs specified on the command line
set curview 1
set selectedview 1
@@ -8641,6 +8669,7 @@ if {$cmdline_files ne {} || $revtreeargs ne {}} {
set viewname(1) "Command line"
set viewfiles(1) $cmdline_files
set viewargs(1) $revtreeargs
+ set viewargscmd(1) $revtreeargscmd
set viewperm(1) 0
addviewmenu 1
.bar.view entryconf Edit* -state normal
@@ -8654,6 +8683,7 @@ if {[info exists permviews]} {
set viewname($n) [lindex $v 0]
set viewfiles($n) [lindex $v 1]
set viewargs($n) [lindex $v 2]
+ set viewargscmd($n) [lindex $v 3]
set viewperm($n) 1
addviewmenu $n
}
-
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
