It is possible for the remote summary line to be displayed over the
local progress display line, and therefore that local progress gets
bumped to the next line. However, if the progress line is long enough,
it might not be entirely overwritten by the remote summary line. This
creates a messed up display such as:
remote: Total 310 (delta 160), reused 178 (delta 112)iB/s
Receiving objects: 100% (310/310), 379.98 KiB | 136 KiB/s, done.
So we have to clear the screen line before displaying the remote message
to make sure the local progress is not visible anymore on the first
line.
Yet some Git versions on the remote side might be sending updates to the
same line and terminate it with \r, and a separate packet with a single
\n might be sent later when the progress display is done. This means
the screen line must *not* be cleared in that case.
Since the sideband code already has to figure out line breaks in the
received packet to properly prepend the "remote:" prefix, we can easily
determine if the remote line about to be displayed is empty. Only when
it is not then a proper suffix is inserted before the \r or \n to clear
the end of the screen line.
Also some magic constants related to the prefix length have been
replaced with a variable, making it similar to the suffix length
handling. Since gcc is smart enough to detect that the variable is
constant there is no impact on the generated code.
Signed-off-by: Nicolas Pitre <nico@xxxxxxx>
---
diff --git a/sideband.c b/sideband.c
index ab8a1e9..66385ad 100644
--- a/sideband.c
+++ b/sideband.c
@@ -11,13 +11,19 @@
* stream, aka "verbose"). A message over band #3 is a signal that
* the remote died unexpectedly. A flush() concludes the stream.
*/
+
+#define PREFIX "remote:"
+#define SUFFIX "\e[K" /* change to " " if ANSI sequences don't work */
+
int recv_sideband(const char *me, int in_stream, int out, int err)
{
- char buf[7 + LARGE_PACKET_MAX + 1];
- strcpy(buf, "remote:");
+ unsigned pf = strlen(PREFIX);
+ unsigned sf = strlen(SUFFIX);
+ char buf[pf + LARGE_PACKET_MAX + sf + 1];
+ memcpy(buf, PREFIX, pf);
while (1) {
int band, len;
- len = packet_read_line(in_stream, buf+7, LARGE_PACKET_MAX);
+ len = packet_read_line(in_stream, buf + pf, LARGE_PACKET_MAX);
if (len == 0)
break;
if (len < 1) {
@@ -25,35 +31,52 @@ int recv_sideband(const char *me, int in_stream, int out, int err)
safe_write(err, buf, len);
return SIDEBAND_PROTOCOL_ERROR;
}
- band = buf[7] & 0xff;
+ band = buf[pf] & 0xff;
len--;
switch (band) {
case 3:
- buf[7] = ' ';
- buf[8+len] = '\n';
- safe_write(err, buf, 8+len+1);
+ buf[pf] = ' ';
+ buf[pf+1+len] = '\n';
+ safe_write(err, buf, pf+1+len+1);
return SIDEBAND_REMOTE_ERROR;
case 2:
- buf[7] = ' ';
- len += 8;
+ buf[pf] = ' ';
+ len += pf+1;
while (1) {
- int brk = 8;
+ int brk = pf+1;
+
+ /* Break the buffer into separate lines. */
while (brk < len) {
brk++;
if (buf[brk-1] == '\n' ||
buf[brk-1] == '\r')
break;
}
- safe_write(err, buf, brk);
+
+ /*
+ * Let's insert a suffix to clear the end
+ * of the screen line, but only if current
+ * line data actually contains something.
+ */
+ if (brk > pf+1 + 1) {
+ char save[sf];
+ memcpy(save, buf + brk, sf);
+ buf[brk + sf - 1] = buf[brk - 1];
+ memcpy(buf + brk - 1, SUFFIX, sf);
+ safe_write(err, buf, brk + sf);
+ memcpy(buf + brk, save, sf);
+ } else
+ safe_write(err, buf, brk);
+
if (brk < len) {
- memmove(buf + 8, buf + brk, len - brk);
- len = len - brk + 8;
+ memmove(buf + pf+1, buf + brk, len - brk);
+ len = len - brk + pf+1;
} else
break;
}
continue;
case 1:
- safe_write(out, buf+8, len);
+ safe_write(out, buf + pf+1, len);
continue;
default:
len = sprintf(buf,
-
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
