---
Documentation/git-branch.txt | 54 +++++++++++++++++-------------------
1 file changed, 25 insertions(+), 29 deletions(-)
diff --git a/Documentation/git-branch.txt
b/Documentation/git-branch.txt
index 0b08442932..489507e25f 100644
--- a/Documentation/git-branch.txt
+++ b/Documentation/git-branch.txt
@@ -17,13 +17,13 @@ SYNOPSIS
[(-r | --remotes) | (-a | --all)]
[--list] [<pattern>...]
'git branch' [--track[=(direct|inherit)] | --no-track] [-f]
- [--recurse-submodules] <branchname> [<start-point>]
-'git branch' (--set-upstream-to=<upstream> | -u <upstream>)
[<branchname>]
-'git branch' --unset-upstream [<branchname>]
-'git branch' (-m | -M) [<oldbranch>] <newbranch>
-'git branch' (-c | -C) [<oldbranch>] <newbranch>
-'git branch' (-d | -D) [-r] <branchname>...
-'git branch' --edit-description [<branchname>]
+ [--recurse-submodules] <new-branch> [<start-point>]
+'git branch' (--set-upstream-to=<upstream> | -u <upstream>) [<branch>]
+'git branch' --unset-upstream [<branch>]
+'git branch' (-m | -M) [<branch>] <new-branch>
+'git branch' (-c | -C) [<branch>] <new-branch>
+'git branch' (-d | -D) [-r] <branch>...
+'git branch' --edit-description [<branch>]
DESCRIPTION
-----------
@@ -53,7 +53,7 @@ branches not merged into the named commit will be
listed. If the <commit>
argument is missing it defaults to `HEAD` (i.e. the tip of the current
branch).
-The command's second form creates a new branch head named <branchname>
+The command's second form creates a new branch head named <new-branch>
which points to the current `HEAD`, or <start-point> if given. As a
special case, for <start-point>, you may use `"A...B"` as a shortcut
for
the merge base of `A` and `B` if there is exactly one merge base. You
@@ -61,7 +61,7 @@ can leave out at most one of `A` and `B`, in which
case it defaults to
`HEAD`.
Note that this will create the new branch, but it will not switch the
-working tree to it; use "git switch <newbranch>" to switch to the
+working tree to it; use "git switch <new-branch>" to switch to the
new branch.
When a local branch is started off a remote-tracking branch, Git sets
up the
@@ -72,17 +72,17 @@ the remote-tracking branch. This behavior may be
changed via the global
overridden by using the `--track` and `--no-track` options, and
changed later using `git branch --set-upstream-to`.
-With a `-m` or `-M` option, <oldbranch> will be renamed to
<newbranch>.
-If <oldbranch> had a corresponding reflog, it is renamed to match
-<newbranch>, and a reflog entry is created to remember the branch
-renaming. If <newbranch> exists, -M must be used to force the rename
+With a `-m` or `-M` option, <branch> will be renamed to <new-branch>.
+If <branch> had a corresponding reflog, it is renamed to match
+<new-branch>, and a reflog entry is created to remember the branch
+renaming. If <new-branch> exists, -M must be used to force the rename
to happen.
The `-c` and `-C` options have the exact same semantics as `-m` and
`-M`, except instead of the branch being renamed, it will be copied to
a
new name, along with its config and reflog.
-With a `-d` or `-D` option, `<branchname>` will be deleted. You may
+With a `-d` or `-D` option, `<branch>` will be deleted. You may
specify more than one branch for deletion. If the branch currently
has a reflog then the reflog will also be deleted.
@@ -107,7 +107,7 @@ OPTIONS
--create-reflog::
Create the branch's reflog. This activates recording of
all changes made to the branch ref, enabling use of date
- based sha1 expressions such as "<branchname>@\{yesterday}".
+ based sha1 expressions such as "<branch>@\{yesterday}".
Note that in non-bare repositories, reflogs are usually
enabled by default by the `core.logAllRefUpdates` config option.
The negated form `--no-create-reflog` only overrides an earlier
@@ -116,7 +116,7 @@ OPTIONS
-f::
--force::
- Reset <branchname> to <start-point>, even if <branchname> exists
+ Reset <new-branch> to <start-point>, even if <new-branch> exists
already. Without `-f`, 'git branch' refuses to change an existing
branch.
In combination with `-d` (or `--delete`), allow deleting the
branch irrespective of its merged status, or whether it even
@@ -124,8 +124,8 @@ OPTIONS
`-m` (or `--move`), allow renaming the branch even if the new
branch name already exists, the same applies for `-c` (or `--copy`).
+
-Note that 'git branch -f <branchname> [<start-point>]', even with
'-f',
-refuses to change an existing branch `<branchname>` that is checked
out
+Note that 'git branch -f <new-branch> [<start-point>]', even with
'-f',
+refuses to change an existing branch `<new-branch>` that is checked
out
in another worktree linked to the same repository.
-m::
@@ -255,7 +255,7 @@ how the `branch.<name>.remote` and
`branch.<name>.merge` options are used.
linkgit:git-config[1]. Currently, only branch creation is
supported.
+
-When used in branch creation, a new branch <branchname> will be
created
+When used in branch creation, a new branch <new-branch> will be
created
in the superproject and all of the submodules in the superproject's
<start-point>. In submodules, the branch will point to the submodule
commit in the superproject's <start-point> but the branch's tracking
@@ -270,12 +270,12 @@ superproject's "origin/main", but tracks the
submodule's "origin/main".
-u <upstream>::
--set-upstream-to=<upstream>::
- Set up <branchname>'s tracking information so <upstream> is
- considered <branchname>'s upstream branch. If no <branchname>
+ Set up <branch>'s tracking information so <upstream> is
+ considered <branch>'s upstream branch. If no <branch>
is specified, then it defaults to the current branch.
--unset-upstream::
- Remove the upstream information for <branchname>. If no branch
+ Remove the upstream information for <branch>. If no branch
is specified it defaults to the current branch.
--edit-description::
@@ -300,8 +300,8 @@ superproject's "origin/main", but tracks the
submodule's "origin/main".
Only list branches whose tips are not reachable from the
specified commit (HEAD if not specified). Implies `--list`.
-<branchname>::
- The name of the branch to create or delete.
+<new-branch>::
+ The name of the branch to create.
The new branch name must pass all checks defined by
linkgit:git-check-ref-format[1]. Some of these checks
may restrict the characters allowed in a branch name.
@@ -311,14 +311,10 @@ superproject's "origin/main", but tracks the
submodule's "origin/main".
given as a branch name, a commit-id, or a tag. If this
option is omitted, the current HEAD will be used instead.
-<oldbranch>::
+<branch>::
The name of an existing branch. If this option is omitted,
the name of the current branch will be used instead.
-<newbranch>::
- The new name for an existing branch. The same restrictions as for
- <branchname> apply.
-
--sort=<key>::
Sort based on the key given. Prefix `-` to sort in descending
order of the value. You may use the --sort=<key> option
