From: Elijah Newren <newren@xxxxxxxxx>
There is already a 'rebase' mode with `--onto`. Let's add an 'advance' or
'cherry-pick' mode with `--advance`. This new mode will make the target
branch advance as we replay commits onto it.
The replayed commits should have a single tip, so that it's clear where
the target branch should be advanced. If they have more than one tip,
this new mode will error out.
Co-authored-by: Christian Couder <chriscool@xxxxxxxxxxxxx>
Signed-off-by: Elijah Newren <newren@xxxxxxxxx>
Signed-off-by: Christian Couder <chriscool@xxxxxxxxxxxxx>
---
Documentation/git-replay.txt | 41 ++++++--
builtin/replay.c | 185 +++++++++++++++++++++++++++++++++--
t/t3650-replay-basics.sh | 34 +++++++
3 files changed, 243 insertions(+), 17 deletions(-)
diff --git a/Documentation/git-replay.txt b/Documentation/git-replay.txt
index 86be363f9b..2c09232c8f 100644
--- a/Documentation/git-replay.txt
+++ b/Documentation/git-replay.txt
@@ -9,7 +9,7 @@ git-replay - Replay commits on a new base, works on bare repos too
SYNOPSIS
--------
[verse]
-'git replay' --onto <newbase> <revision-range>...
+'git replay' (--onto <newbase> | --advance <branch>) <revision-range>...
DESCRIPTION
-----------
@@ -29,14 +29,25 @@ OPTIONS
Starting point at which to create the new commits. May be any
valid commit, and not just an existing branch name.
+
-The update-ref command(s) in the output will update the branch(es) in
-the revision range to point at the new commits, similar to the way how
-`git rebase --update-refs` updates multiple branches in the affected
-range.
+When `--onto` is specified, the update-ref command(s) in the output will
+update the branch(es) in the revision range to point at the new
+commits, similar to the way how `git rebase --update-refs` updates
+multiple branches in the affected range.
+
+--advance <branch>::
+ Starting point at which to create the new commits; must be a
+ branch name.
++
+When `--advance` is specified, the update-ref command(s) in the output
+will update the branch passed as an argument to `--advance` to point at
+the new commits (in other words, this mimics a cherry-pick operation).
<revision-range>::
- Range of commits to replay; see "Specifying Ranges" in
- linkgit:git-rev-parse and the "Commit Limiting" options below.
+ Range of commits to replay. More than one <revision-range> can
+ be passed, but in `--advance <branch>` mode, they should have
+ a single tip, so that it's clear where <branch> should point
+ to. See "Specifying Ranges" in linkgit:git-rev-parse and the
+ "Commit Limiting" options below.
include::rev-list-options.txt[]
@@ -51,7 +62,9 @@ input to `git update-ref --stdin`. It is of the form:
update refs/heads/branch3 ${NEW_branch3_HASH} ${OLD_branch3_HASH}
where the number of refs updated depends on the arguments passed and
-the shape of the history being replayed.
+the shape of the history being replayed. When using `--advance`, the
+number of refs updated is always one, but for `--onto`, it can be one
+or more (rebasing multiple branches simultaneously is supported).
EXIT STATUS
-----------
@@ -71,6 +84,18 @@ $ git replay --onto target origin/main..mybranch
update refs/heads/mybranch ${NEW_mybranch_HASH} ${OLD_mybranch_HASH}
------------
+To cherry-pick the commits from mybranch onto target:
+
+------------
+$ git replay --advance target origin/main..mybranch
+update refs/heads/target ${NEW_target_HASH} ${OLD_target_HASH}
+------------
+
+Note that the first two examples replay the exact same commits and on
+top of the exact same new base, they only differ in that the first
+provides instructions to make mybranch point at the new commits and
+the second provides instructions to make target point at them.
+
When calling `git replay`, one does not need to specify a range of
commits to replay using the syntax `A..B`; any range expression will
do:
diff --git a/builtin/replay.c b/builtin/replay.c
index 213ac2764e..d458837e9c 100644
--- a/builtin/replay.c
+++ b/builtin/replay.c
@@ -14,6 +14,7 @@
#include "parse-options.h"
#include "refs.h"
#include "revision.h"
+#include "strmap.h"
#include <oidset.h>
#include <tree.h>
@@ -82,6 +83,146 @@ static struct commit *create_commit(struct tree *tree,
return (struct commit *)obj;
}
+struct ref_info {
+ struct commit *onto;
+ struct strset positive_refs;
+ struct strset negative_refs;
+ int positive_refexprs;
+ int negative_refexprs;
+};
+
+static void get_ref_information(struct rev_cmdline_info *cmd_info,
+ struct ref_info *ref_info)
+{
+ int i;
+
+ ref_info->onto = NULL;
+ strset_init(&ref_info->positive_refs);
+ strset_init(&ref_info->negative_refs);
+ ref_info->positive_refexprs = 0;
+ ref_info->negative_refexprs = 0;
+
+ /*
+ * When the user specifies e.g.
+ * git replay origin/main..mybranch
+ * git replay ^origin/next mybranch1 mybranch2
+ * we want to be able to determine where to replay the commits. In
+ * these examples, the branches are probably based on an old version
+ * of either origin/main or origin/next, so we want to replay on the
+ * newest version of that branch. In contrast we would want to error
+ * out if they ran
+ * git replay ^origin/master ^origin/next mybranch
+ * git replay mybranch~2..mybranch
+ * the first of those because there's no unique base to choose, and
+ * the second because they'd likely just be replaying commits on top
+ * of the same commit and not making any difference.
+ */
+ for (i = 0; i < cmd_info->nr; i++) {
+ struct rev_cmdline_entry *e = cmd_info->rev + i;
+ struct object_id oid;
+ const char *refexpr = e->name;
+ char *fullname = NULL;
+ int can_uniquely_dwim = 1;
+
+ if (*refexpr == '^')
+ refexpr++;
+ if (repo_dwim_ref(the_repository, refexpr, strlen(refexpr), &oid, &fullname, 0) != 1)
+ can_uniquely_dwim = 0;
+
+ if (e->flags & BOTTOM) {
+ if (can_uniquely_dwim)
+ strset_add(&ref_info->negative_refs, fullname);
+ if (!ref_info->negative_refexprs)
+ ref_info->onto = lookup_commit_reference_gently(the_repository,
+ &e->item->oid, 1);
+ ref_info->negative_refexprs++;
+ } else {
+ if (can_uniquely_dwim)
+ strset_add(&ref_info->positive_refs, fullname);
+ ref_info->positive_refexprs++;
+ }
+
+ free(fullname);
+ }
+}
+
+static void determine_replay_mode(struct rev_cmdline_info *cmd_info,
+ const char *onto_name,
+ const char **advance_name,
+ struct commit **onto,
+ struct strset **update_refs)
+{
+ struct ref_info rinfo;
+
+ get_ref_information(cmd_info, &rinfo);
+ if (!rinfo.positive_refexprs)
+ die(_("need some commits to replay"));
+ if (onto_name && *advance_name)
+ die(_("--onto and --advance are incompatible"));
+ else if (onto_name) {
+ *onto = peel_committish(onto_name);
+ if (rinfo.positive_refexprs <
+ strset_get_size(&rinfo.positive_refs))
+ die(_("all positive revisions given must be references"));
+ } else if (*advance_name) {
+ struct object_id oid;
+ char *fullname = NULL;
+
+ *onto = peel_committish(*advance_name);
+ if (repo_dwim_ref(the_repository, *advance_name, strlen(*advance_name),
+ &oid, &fullname, 0) == 1) {
+ *advance_name = fullname;
+ } else {
+ die(_("argument to --advance must be a reference"));
+ }
+ if (rinfo.positive_refexprs > 1)
+ die(_("cannot advance target with multiple sources because ordering would be ill-defined"));
+ } else {
+ int positive_refs_complete = (
+ rinfo.positive_refexprs ==
+ strset_get_size(&rinfo.positive_refs));
+ int negative_refs_complete = (
+ rinfo.negative_refexprs ==
+ strset_get_size(&rinfo.negative_refs));
+ /*
+ * We need either positive_refs_complete or
+ * negative_refs_complete, but not both.
+ */
+ if (rinfo.negative_refexprs > 0 &&
+ positive_refs_complete == negative_refs_complete)
+ die(_("cannot implicitly determine whether this is an --advance or --onto operation"));
+ if (negative_refs_complete) {
+ struct hashmap_iter iter;
+ struct strmap_entry *entry;
+
+ if (rinfo.negative_refexprs == 0)
+ die(_("all positive revisions given must be references"));
+ else if (rinfo.negative_refexprs > 1)
+ die(_("cannot implicitly determine whether this is an --advance or --onto operation"));
+ else if (rinfo.positive_refexprs > 1)
+ die(_("cannot advance target with multiple source branches because ordering would be ill-defined"));
+
+ /* Only one entry, but we have to loop to get it */
+ strset_for_each_entry(&rinfo.negative_refs,
+ &iter, entry) {
+ *advance_name = entry->key;
+ }
+ } else { /* positive_refs_complete */
+ if (rinfo.negative_refexprs > 1)
+ die(_("cannot implicitly determine correct base for --onto"));
+ if (rinfo.negative_refexprs == 1)
+ *onto = rinfo.onto;
+ }
+ }
+ if (!*advance_name) {
+ *update_refs = xcalloc(1, sizeof(**update_refs));
+ **update_refs = rinfo.positive_refs;
+ memset(&rinfo.positive_refs, 0, sizeof(**update_refs));
+ }
+ strset_clear(&rinfo.negative_refs);
+ strset_clear(&rinfo.positive_refs);
+}
+
static struct commit *pick_regular_commit(struct commit *pickme,
struct commit *last_commit,
struct merge_options *merge_opt,
@@ -114,20 +255,26 @@ static struct commit *pick_regular_commit(struct commit *pickme,
int cmd_replay(int argc, const char **argv, const char *prefix)
{
- struct commit *onto;
+ const char *advance_name = NULL;
+ struct commit *onto = NULL;
const char *onto_name = NULL;
- struct commit *last_commit = NULL;
+
struct rev_info revs;
+ struct commit *last_commit = NULL;
struct commit *commit;
struct merge_options merge_opt;
struct merge_result result;
+ struct strset *update_refs = NULL;
int ret = 0;
const char * const replay_usage[] = {
- N_("git replay --onto <newbase> <revision-range>..."),
+ N_("git replay (--onto <newbase> | --advance <branch>) <revision-range>..."),
NULL
};
struct option replay_options[] = {
+ OPT_STRING(0, "advance", &advance_name,
+ N_("branch"),
+ N_("make replay advance given branch")),
OPT_STRING(0, "onto", &onto_name,
N_("revision"),
N_("replay onto given commit")),
@@ -137,13 +284,11 @@ int cmd_replay(int argc, const char **argv, const char *prefix)
argc = parse_options(argc, argv, prefix, replay_options, replay_usage,
PARSE_OPT_KEEP_ARGV0 | PARSE_OPT_KEEP_UNKNOWN_OPT);
- if (!onto_name) {
- error(_("option --onto is mandatory"));
+ if (!onto_name && !advance_name) {
+ error(_("option --onto or --advance is mandatory"));
usage_with_options(replay_usage, replay_options);
}
- onto = peel_committish(onto_name);
-
repo_init_revisions(the_repository, &revs, prefix);
argc = setup_revisions(argc, argv, &revs, NULL);
@@ -158,6 +303,12 @@ int cmd_replay(int argc, const char **argv, const char *prefix)
revs.topo_order = 1;
revs.simplify_history = 0;
+ determine_replay_mode(&revs.cmdline, onto_name, &advance_name,
+ &onto, &update_refs);
+
+ if (!onto) /* FIXME: Should handle replaying down to root commit */
+ die("Replaying down to root commit is not supported yet!");
+
if (prepare_revision_walk(&revs) < 0) {
ret = error(_("error preparing revisions"));
goto cleanup;
@@ -166,6 +317,7 @@ int cmd_replay(int argc, const char **argv, const char *prefix)
init_merge_options(&merge_opt, the_repository);
memset(&result, 0, sizeof(result));
merge_opt.show_rename_progress = 0;
+
result.tree = repo_get_commit_tree(the_repository, onto);
last_commit = onto;
while ((commit = get_revision(&revs))) {
@@ -180,12 +332,15 @@ int cmd_replay(int argc, const char **argv, const char *prefix)
if (!last_commit)
break;
+ /* Update any necessary branches */
+ if (advance_name)
+ continue;
decoration = get_name_decoration(&commit->object);
if (!decoration)
continue;
-
while (decoration) {
- if (decoration->type == DECORATION_REF_LOCAL) {
+ if (decoration->type == DECORATION_REF_LOCAL &&
+ strset_contains(update_refs, decoration->name)) {
printf("update %s %s %s\n",
decoration->name,
oid_to_hex(&last_commit->object.oid),
@@ -195,10 +350,22 @@ int cmd_replay(int argc, const char **argv, const char *prefix)
}
}
+ /* In --advance mode, advance the target ref */
+ if (result.clean == 1 && advance_name) {
+ printf("update %s %s %s\n",
+ advance_name,
+ oid_to_hex(&last_commit->object.oid),
+ oid_to_hex(&onto->object.oid));
+ }
+
merge_finalize(&merge_opt, &result);
ret = result.clean;
cleanup:
+ if (update_refs) {
+ strset_clear(update_refs);
+ free(update_refs);
+ }
release_revisions(&revs);
/* Return */
diff --git a/t/t3650-replay-basics.sh b/t/t3650-replay-basics.sh
index a1da4f9ef9..68a87e7803 100755
--- a/t/t3650-replay-basics.sh
+++ b/t/t3650-replay-basics.sh
@@ -80,4 +80,38 @@ test_expect_success 'using replay on bare repo to rebase with a conflict' '
test_expect_code 1 git -C bare replay --onto topic1 B..conflict
'
+test_expect_success 'using replay to perform basic cherry-pick' '
+ # The differences between this test and previous ones are:
+ # --advance vs --onto
+ # 2nd field of result is refs/heads/main vs. refs/heads/topic2
+ # 4th field of result is hash for main instead of hash for topic2
+
+ git replay --advance main topic1..topic2 >result &&
+
+ test_line_count = 1 result &&
+
+ git log --format=%s $(cut -f 3 -d " " result) >actual &&
+ test_write_lines E D M L B A >expect &&
+ test_cmp expect actual &&
+
+ printf "update refs/heads/main " >expect &&
+ printf "%s " $(cut -f 3 -d " " result) >>expect &&
+ git rev-parse main >>expect &&
+
+ test_cmp expect result
+'
+
+test_expect_success 'using replay on bare repo to perform basic cherry-pick' '
+ git -C bare replay --advance main topic1..topic2 >result-bare &&
+ test_cmp expect result-bare
+'
+
+test_expect_success 'replay on bare repo fails with both --advance and --onto' '
+ test_must_fail git -C bare replay --advance main --onto main topic1..topic2 >result-bare
+'
+
+test_expect_success 'replay fails when both --advance and --onto are omitted' '
+ test_must_fail git replay topic1..topic2 >result
+'
+
test_done
--
2.42.0.339.g663cbc8ab1
