[PATCH v2] pack-bitmap: remove trace2 region from hot path

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Derrick Stolee <derrickstolee@xxxxxxxxxx>

The trace2 region around the call to lazy_bitmap_for_commit() in
bitmap_for_commit() was added in 28cd730680d (pack-bitmap: prepare to
read lookup table extension, 2022-08-14). While adding trace2 regions is
typically helpful for tracking performance, this method is called
possibly thousands of times as a commit walk explores commit history
looking for a matching bitmap. When trace2 output is enabled, this
region is emitted many times and performance is throttled by that
output.

For now, remove these regions entirely.

This is a critical path, and it would be valuable to measure that the
time spent in bitmap_for_commit() does not increase when using the
commit lookup table. The best way to do that would be to use a mechanism
that sums the time spent in a region and reports a single value at the
end of the process. This technique was introduced but not merged by [1]
so maybe this example presents some justification to revisit that
approach.

[1] https://lore.kernel.org/git/pull.1099.v2.git.1640720202.gitgitgadget@xxxxxxxxx/

To help with the 'git blame' output in this region, add a comment that
warns against adding a trace2 region. Delete a test from t5310 that used
that trace output to check that this lookup optimization was activated.
To create this kind of test again in the future, the stopwatch traces
mentioned earlier could be used as a signal that we activated this code
path.

Helpedy-by: Junio C Hamano <gitster@xxxxxxxxx>
Signed-off-by: Derrick Stolee <derrickstolee@xxxxxxxxxx>
---
    [For 2.38.0] pack-bitmap: remove trace2 region from hot path
    
    I noticed this while trying to backport the Abhradeep's lookup table
    work into GitHub's fork. Something went wrong in that process, causing
    this region to significantly slow down. It turns out that slow down does
    not reproduce on current 'master', which is good. I must have missed
    something while I was backporting.
    
    Regardless, the use of trace2_region_enter() here should be removed or
    replaced. For the sake of 2.38.0, this simple removal is safe enough.
    However, to really dig into what was happening I had to construct a
    rebase [2] of Jeff's trace2 stopwatch work, then apply changes on top
    [3] that could replace this region with trace2_timer_*() methods.
    
    [2]
    https://github.com/git/git/compare/master...derrickstolee:trace2-stopwatch
    [3]
    https://github.com/derrickstolee/git/compare/trace2-stopwatch...bitmap-trace2
    
    As a separate discussion, it might be worth revisiting that stopwatch
    work so we have it available as a tool when doing these kinds of
    investigations.
    
    
    Updates in v2
    =============
    
     * I removed the test that was checking for trace2 regions. In [3], I
       played around with using trace2_counter() to replace that check, so
       we could reinstate the test without the performance drop from using
       repeated trace2_region() calls.
     * I squashed in Junio's comment change.
    
    Thanks, -Stolee

Published-As: https://github.com/gitgitgadget/git/releases/tag/pr-1365%2Fderrickstolee%2Fbitmap-remove-trace2-v2
Fetch-It-Via: git fetch https://github.com/gitgitgadget/git pr-1365/derrickstolee/bitmap-remove-trace2-v2
Pull-Request: https://github.com/gitgitgadget/git/pull/1365

Range-diff vs v1:

 1:  987827eaf90 ! 1:  8ef63c9e32f pack-bitmap: remove trace2 region from hot path
     @@ Commit message
      
          [1] https://lore.kernel.org/git/pull.1099.v2.git.1640720202.gitgitgadget@xxxxxxxxx/
      
     +    To help with the 'git blame' output in this region, add a comment that
     +    warns against adding a trace2 region. Delete a test from t5310 that used
     +    that trace output to check that this lookup optimization was activated.
     +    To create this kind of test again in the future, the stopwatch traces
     +    mentioned earlier could be used as a signal that we activated this code
     +    path.
     +
     +    Helpedy-by: Junio C Hamano <gitster@xxxxxxxxx>
          Signed-off-by: Derrick Stolee <derrickstolee@xxxxxxxxxx>
      
       ## pack-bitmap.c ##
     @@ pack-bitmap.c: struct ewah_bitmap *bitmap_for_commit(struct bitmap_index *bitmap
       			return NULL;
       
      -		trace2_region_enter("pack-bitmap", "reading_lookup_table", the_repository);
     ++		/* this is a fairly hot codepath - no trace2_region please */
       		/* NEEDSWORK: cache misses aren't recorded */
       		bitmap = lazy_bitmap_for_commit(bitmap_git, commit);
      -		trace2_region_leave("pack-bitmap", "reading_lookup_table", the_repository);
       		if (!bitmap)
       			return NULL;
       		return lookup_stored_bitmap(bitmap);
     +
     + ## t/t5310-pack-bitmaps.sh ##
     +@@ t/t5310-pack-bitmaps.sh: test_expect_success 'verify writing bitmap lookup table when enabled' '
     + 	grep "\"label\":\"writing_lookup_table\"" trace2
     + '
     + 
     +-test_expect_success 'lookup table is actually used to traverse objects' '
     +-	git repack -adb &&
     +-	GIT_TRACE2_EVENT="$(pwd)/trace3" \
     +-		git rev-list --use-bitmap-index --count --all &&
     +-	grep "\"label\":\"reading_lookup_table\"" trace3
     +-'
     +-
     + test_expect_success 'truncated bitmap fails gracefully (lookup table)' '
     + 	test_config pack.writebitmaphashcache false &&
     + 	git repack -adb &&


 pack-bitmap.c           | 3 +--
 t/t5310-pack-bitmaps.sh | 7 -------
 2 files changed, 1 insertion(+), 9 deletions(-)

diff --git a/pack-bitmap.c b/pack-bitmap.c
index 9a208abc1fd..a2bbbbd811d 100644
--- a/pack-bitmap.c
+++ b/pack-bitmap.c
@@ -830,10 +830,9 @@ struct ewah_bitmap *bitmap_for_commit(struct bitmap_index *bitmap_git,
 		if (!bitmap_git->table_lookup)
 			return NULL;
 
-		trace2_region_enter("pack-bitmap", "reading_lookup_table", the_repository);
+		/* this is a fairly hot codepath - no trace2_region please */
 		/* NEEDSWORK: cache misses aren't recorded */
 		bitmap = lazy_bitmap_for_commit(bitmap_git, commit);
-		trace2_region_leave("pack-bitmap", "reading_lookup_table", the_repository);
 		if (!bitmap)
 			return NULL;
 		return lookup_stored_bitmap(bitmap);
diff --git a/t/t5310-pack-bitmaps.sh b/t/t5310-pack-bitmaps.sh
index 7e50f8e7653..6d693eef82f 100755
--- a/t/t5310-pack-bitmaps.sh
+++ b/t/t5310-pack-bitmaps.sh
@@ -455,13 +455,6 @@ test_expect_success 'verify writing bitmap lookup table when enabled' '
 	grep "\"label\":\"writing_lookup_table\"" trace2
 '
 
-test_expect_success 'lookup table is actually used to traverse objects' '
-	git repack -adb &&
-	GIT_TRACE2_EVENT="$(pwd)/trace3" \
-		git rev-list --use-bitmap-index --count --all &&
-	grep "\"label\":\"reading_lookup_table\"" trace3
-'
-
 test_expect_success 'truncated bitmap fails gracefully (lookup table)' '
 	test_config pack.writebitmaphashcache false &&
 	git repack -adb &&

base-commit: 1b3d6e17fe83eb6f79ffbac2f2c61bbf1eaef5f8
-- 
gitgitgadget



[Index of Archives]     [Linux Kernel Development]     [Gcc Help]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [V4L]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]     [Fedora Users]

  Powered by Linux