[PATCH 07/18] chainlint.pl: don't require `return|exit|continue` to end with `&&`

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Eric Sunshine <sunshine@xxxxxxxxxxxxxx>

In order to check for &&-chain breakage, each time TestParser encounters
a new command, it checks whether the previous command ends with `&&`,
and -- with a couple exceptions -- signals breakage if it does not. The
first exception is that a command may validly end with `||`, which is
commonly employed as `command || return 1` at the very end of a loop
body to terminate the loop early. The second is that piping one
command's output with `|` to another command does not constitute a
&&-chain break (the exit status of the pipe is the exit status of the
final command in the pipe).

However, it turns out that there are a few additional cases found in the
wild in which it is likely safe for `&&` to be missing even when other
commands follow. For instance:

    while {condition-1}
    do
        test {condition-2} || return 1 # or `exit 1` within a subshell
        more-commands
    done

    while {condition-1}
    do
        test {condition-2} || continue
        more-commands
    done

Such cases indicate deliberate thought about failure modes by the test
author, thus flagging them as breaking the &&-chain is not helpful.
Therefore, take these special cases into consideration when checking for
&&-chain breakage.

Signed-off-by: Eric Sunshine <sunshine@xxxxxxxxxxxxxx>
---
 t/chainlint.pl                             | 20 ++++++++++++++++++--
 t/chainlint/chain-break-continue.expect    | 12 ++++++++++++
 t/chainlint/chain-break-continue.test      | 13 +++++++++++++
 t/chainlint/chain-break-return-exit.expect |  4 ++++
 t/chainlint/chain-break-return-exit.test   |  5 +++++
 t/chainlint/return-loop.expect             |  5 +++++
 t/chainlint/return-loop.test               |  6 ++++++
 7 files changed, 63 insertions(+), 2 deletions(-)
 create mode 100644 t/chainlint/chain-break-continue.expect
 create mode 100644 t/chainlint/chain-break-continue.test
 create mode 100644 t/chainlint/chain-break-return-exit.expect
 create mode 100644 t/chainlint/chain-break-return-exit.test
 create mode 100644 t/chainlint/return-loop.expect
 create mode 100644 t/chainlint/return-loop.test

diff --git a/t/chainlint.pl b/t/chainlint.pl
index 898573a9100..31c444067ce 100755
--- a/t/chainlint.pl
+++ b/t/chainlint.pl
@@ -473,13 +473,29 @@ sub ends_with {
 	return 1;
 }
 
+sub match_ending {
+	my ($tokens, $endings) = @_;
+	for my $needles (@$endings) {
+		next if @$tokens < scalar(grep {$_ ne "\n"} @$needles);
+		return 1 if ends_with($tokens, $needles);
+	}
+	return undef;
+}
+
+my @safe_endings = (
+	[qr/^(?:&&|\|\||\|)$/],
+	[qr/^(?:exit|return)$/, qr/^(?:\d+|\$\?)$/],
+	[qr/^(?:exit|return)$/, qr/^(?:\d+|\$\?)$/, qr/^;$/],
+	[qr/^(?:exit|return|continue)$/],
+	[qr/^(?:exit|return|continue)$/, qr/^;$/]);
+
 sub accumulate {
 	my ($self, $tokens, $cmd) = @_;
 	goto DONE unless @$tokens;
 	goto DONE if @$cmd == 1 && $$cmd[0] eq "\n";
 
-	# did previous command end with "&&", "||", "|"?
-	goto DONE if ends_with($tokens, [qr/^(?:&&|\|\||\|)$/]);
+	# did previous command end with "&&", "|", "|| return" or similar?
+	goto DONE if match_ending($tokens, \@safe_endings);
 
 	# flag missing "&&" at end of previous command
 	my $n = find_non_nl($tokens);
diff --git a/t/chainlint/chain-break-continue.expect b/t/chainlint/chain-break-continue.expect
new file mode 100644
index 00000000000..47a34577100
--- /dev/null
+++ b/t/chainlint/chain-break-continue.expect
@@ -0,0 +1,12 @@
+git ls-tree --name-only -r refs/notes/many_notes |
+while read path
+do
+	test "$path" = "foobar/non-note.txt" && continue
+	test "$path" = "deadbeef" && continue
+	test "$path" = "de/adbeef" && continue
+
+	if test $(expr length "$path") -ne $hexsz
+	then
+		return 1
+	fi
+done
diff --git a/t/chainlint/chain-break-continue.test b/t/chainlint/chain-break-continue.test
new file mode 100644
index 00000000000..f0af71d8bd9
--- /dev/null
+++ b/t/chainlint/chain-break-continue.test
@@ -0,0 +1,13 @@
+git ls-tree --name-only -r refs/notes/many_notes |
+while read path
+do
+# LINT: broken &&-chain okay if explicit "continue"
+	test "$path" = "foobar/non-note.txt" && continue
+	test "$path" = "deadbeef" && continue
+	test "$path" = "de/adbeef" && continue
+
+	if test $(expr length "$path") -ne $hexsz
+	then
+		return 1
+	fi
+done
diff --git a/t/chainlint/chain-break-return-exit.expect b/t/chainlint/chain-break-return-exit.expect
new file mode 100644
index 00000000000..dba292ee89b
--- /dev/null
+++ b/t/chainlint/chain-break-return-exit.expect
@@ -0,0 +1,4 @@
+for i in 1 2 3 4 ; do
+	git checkout main -b $i || return $?
+	test_commit $i $i $i tag$i || return $?
+done
diff --git a/t/chainlint/chain-break-return-exit.test b/t/chainlint/chain-break-return-exit.test
new file mode 100644
index 00000000000..e2b059933aa
--- /dev/null
+++ b/t/chainlint/chain-break-return-exit.test
@@ -0,0 +1,5 @@
+for i in 1 2 3 4 ; do
+# LINT: broken &&-chain okay if explicit "return $?" signals failure
+	git checkout main -b $i || return $?
+	test_commit $i $i $i tag$i || return $?
+done
diff --git a/t/chainlint/return-loop.expect b/t/chainlint/return-loop.expect
new file mode 100644
index 00000000000..cfc0549befe
--- /dev/null
+++ b/t/chainlint/return-loop.expect
@@ -0,0 +1,5 @@
+while test $i -lt $((num - 5))
+do
+	git notes add -m "notes for commit$i" HEAD~$i || return 1
+	i=$((i + 1))
+done
diff --git a/t/chainlint/return-loop.test b/t/chainlint/return-loop.test
new file mode 100644
index 00000000000..f90b1713005
--- /dev/null
+++ b/t/chainlint/return-loop.test
@@ -0,0 +1,6 @@
+while test $i -lt $((num - 5))
+do
+# LINT: "|| return {n}" valid loop escape outside subshell; no "&&" needed
+	git notes add -m "notes for commit$i" HEAD~$i || return 1
+	i=$((i + 1))
+done
-- 
gitgitgadget




[Index of Archives]     [Linux Kernel Development]     [Gcc Help]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [V4L]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]     [Fedora Users]

  Powered by Linux