The range-diff seems a bit messy, because some of the changes are too big
then I have to tune the --create-factor big enough to reveal these changes.
## Changes since WIP v2 ##
1. Write helper functions for t7002 to reuse some code.
2. Refactor/decouple the if/else-if checking chain.
3. Separate out the 'update_mode' refactor into a single commit.
4. Stop using update_sparsity() and instead update the SKIP_WORKTREE
bit for each cache_entry and check it out to the working tree.
## Limitations ##
At this point, we still don't have in-cone to out-of-cone move, which
I don't think is too much a problem, since the title says this series is
around out-of-cone as the <source>.
But I think it worth discuss if we should implement in-cone to
out-of-cone move, since it will be nice (naturally) to have it working.
However, I noticed this from the mv man page:
"In the second form, the last argument has to be an existing directory;
the given sources will be moved into this directory."
I think trying to move out-of-cone, the last argument has to be an non-existent
directory? I'm a bit confused: should we update some of mv basic logic to
accomplish this?
Shaoxuan Yuan (7):
t7002: add tests for moving out-of-cone file/directory
mv: decouple if/else-if checks using goto
mv: check if out-of-cone file exists in index with SKIP_WORKTREE bit
mv: check if <destination> exists in index to handle overwriting
mv: use flags mode for update_mode
mv: add check_dir_in_index() and solve general dir check issue
mv: update sparsity after moving from out-of-cone to in-cone
builtin/mv.c | 244 +++++++++++++++++++++++++---------
t/t7002-mv-sparse-checkout.sh | 85 ++++++++++++
2 files changed, 264 insertions(+), 65 deletions(-)
Range-diff against v2:
1: 271445205d ! 1: a08ce96935 t7002: add tests for moving out-of-cone file/directory
@@ Commit message
Add corresponding tests to test following situations:
- * 'refuse to move out-of-cone directory without --sparse'
- * 'can move out-of-cone directory with --sparse'
- * 'refuse to move out-of-cone file without --sparse'
- * 'can move out-of-cone file with --sparse'
- * 'refuse to move sparse file to existing destination'
- * 'move sparse file to existing destination with --force and --sparse'
+ We do not have sufficient coverage of moving files outside
+ of a sparse-checkout cone. Create new tests covering this
+ behavior, keeping in mind that the user can include --sparse
+ (or not), move a file or directory, and the destination can
+ already exist in the index (in this case user can use --force
+ to overwrite existing entry).
+ Helped-by: Victoria Dye <vdye@xxxxxxxxxx>
+ Helped-by: Derrick Stolee <derrickstolee@xxxxxxxxxx>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@xxxxxxxxx>
## t/t7002-mv-sparse-checkout.sh ##
+@@ t/t7002-mv-sparse-checkout.sh: test_description='git mv in sparse working trees'
+
+ . ./test-lib.sh
+
++setup_sparse_checkout () {
++ mkdir folder1 &&
++ touch folder1/file1 &&
++ git add folder1 &&
++ git sparse-checkout set --cone sub
++}
++
++cleanup_sparse_checkout () {
++ git sparse-checkout disable &&
++ git reset --hard
++}
++
+ test_expect_success 'setup' "
+ mkdir -p sub/dir sub/dir2 &&
+ touch a b c sub/d sub/dir/e sub/dir2/e &&
+@@ t/t7002-mv-sparse-checkout.sh: test_expect_success 'can move files to non-sparse dir' '
+ '
+
+ test_expect_success 'refuse to move file to non-skip-worktree sparse path' '
++ test_when_finished "cleanup_sparse_checkout" &&
+ git reset --hard &&
+ git sparse-checkout init --no-cone &&
+ git sparse-checkout set a !/x y/ !x/y/z &&
@@ t/t7002-mv-sparse-checkout.sh: test_expect_success 'refuse to move file to non-skip-worktree sparse path' '
test_cmp expect stderr
'
+test_expect_failure 'refuse to move out-of-cone directory without --sparse' '
-+ git sparse-checkout disable &&
-+ git reset --hard &&
-+ mkdir folder1 &&
-+ touch folder1/file1 &&
-+ git add folder1 &&
-+ git sparse-checkout init --cone &&
-+ git sparse-checkout set sub &&
++ test_when_finished "cleanup_sparse_checkout" &&
++ setup_sparse_checkout &&
+
+ test_must_fail git mv folder1 sub 2>stderr &&
+ cat sparse_error_header >expect &&
@@ t/t7002-mv-sparse-checkout.sh: test_expect_success 'refuse to move file to non-s
+'
+
+test_expect_failure 'can move out-of-cone directory with --sparse' '
-+ git sparse-checkout disable &&
-+ git reset --hard &&
-+ mkdir folder1 &&
-+ touch folder1/file1 &&
-+ git add folder1 &&
-+ git sparse-checkout init --cone &&
-+ git sparse-checkout set sub &&
++ test_when_finished "cleanup_sparse_checkout" &&
++ setup_sparse_checkout &&
+
+ git mv --sparse folder1 sub 1>actual 2>stderr &&
+ test_must_be_empty stderr &&
@@ t/t7002-mv-sparse-checkout.sh: test_expect_success 'refuse to move file to non-s
+'
+
+test_expect_failure 'refuse to move out-of-cone file without --sparse' '
-+ git sparse-checkout disable &&
-+ git reset --hard &&
-+ mkdir folder1 &&
-+ touch folder1/file1 &&
-+ git add folder1 &&
-+ git sparse-checkout init --cone &&
-+ git sparse-checkout set sub &&
++ test_when_finished "cleanup_sparse_checkout" &&
++ setup_sparse_checkout &&
+
+ test_must_fail git mv folder1/file1 sub 2>stderr &&
+ cat sparse_error_header >expect &&
@@ t/t7002-mv-sparse-checkout.sh: test_expect_success 'refuse to move file to non-s
+'
+
+test_expect_failure 'can move out-of-cone file with --sparse' '
-+ git sparse-checkout disable &&
-+ git reset --hard &&
-+ mkdir folder1 &&
-+ touch folder1/file1 &&
-+ git add folder1 &&
-+ git sparse-checkout init --cone &&
-+ git sparse-checkout set sub &&
++ test_when_finished "cleanup_sparse_checkout" &&
++ setup_sparse_checkout &&
+
+ git mv --sparse folder1/file1 sub 1>actual 2>stderr &&
+ test_must_be_empty stderr &&
@@ t/t7002-mv-sparse-checkout.sh: test_expect_success 'refuse to move file to non-s
+'
+
+test_expect_failure 'refuse to move sparse file to existing destination' '
-+ git sparse-checkout disable &&
-+ git reset --hard &&
++ test_when_finished "cleanup_sparse_checkout" &&
+ mkdir folder1 &&
+ touch folder1/file1 &&
+ touch sub/file1 &&
+ git add folder1 sub/file1 &&
-+ git sparse-checkout init --cone &&
-+ git sparse-checkout set sub &&
++ git sparse-checkout set --cone sub &&
+
+ test_must_fail git mv --sparse folder1/file1 sub 2>stderr &&
+ echo "fatal: destination exists, source=folder1/file1, destination=sub/file1" >expect &&
@@ t/t7002-mv-sparse-checkout.sh: test_expect_success 'refuse to move file to non-s
+'
+
+test_expect_failure 'move sparse file to existing destination with --force and --sparse' '
-+ git sparse-checkout disable &&
-+ git reset --hard &&
++ test_when_finished "cleanup_sparse_checkout" &&
+ mkdir folder1 &&
+ touch folder1/file1 &&
+ touch sub/file1 &&
+ echo "overwrite" >folder1/file1 &&
+ git add folder1 sub/file1 &&
-+ git sparse-checkout init --cone &&
-+ git sparse-checkout set sub &&
++ git sparse-checkout set --cone sub &&
+
+ git mv --sparse --force folder1/file1 sub 2>stderr &&
+ test_must_be_empty stderr &&
-: ---------- > 2: 8065fbc232 mv: decouple if/else-if checks using goto
2: 80f485f146 ! 3: e227fe717b mv: check if out-of-cone file exists in index with SKIP_WORKTREE bit
@@ builtin/mv.c: int cmd_mv(int argc, const char **argv, const char *prefix)
length = strlen(src);
if (lstat(src, &st) < 0) {
-+ /*
-+ * TODO: for now, when you try to overwrite a <destination>
-+ * with your <source> as a sparse file, if you supply a "--sparse"
-+ * flag, then the action will be done without providing "--force"
-+ * and no warning.
-+ *
-+ * This is mainly because the sparse <source>
-+ * is not on-disk, and this if-else chain will be cut off early in
-+ * this check, thus the "--force" check is ignored. Need fix.
-+ */
+- /* only error if existence is expected. */
+- if (modes[i] != SPARSE) {
++ int pos;
++ const struct cache_entry *ce;
+
-+ int pos = cache_name_pos(src, length);
-+ if (pos >= 0) {
-+ const struct cache_entry *ce = active_cache[pos];
-+
-+ if (ce_skip_worktree(ce)) {
-+ if (!ignore_sparse)
-+ string_list_append(&only_match_skip_worktree, src);
-+ else
-+ modes[i] = SPARSE;
-+ }
-+ else
++ pos = cache_name_pos(src, length);
++ if (pos < 0) {
++ /* only error if existence is expected. */
++ if (modes[i] != SPARSE)
+ bad = _("bad source");
++ goto act_on_entry;
+ }
- /* only error if existence is expected. */
-- if (modes[i] != SPARSE)
-+ else if (modes[i] != SPARSE)
++
++ ce = active_cache[pos];
++ if (!ce_skip_worktree(ce)) {
bad = _("bad source");
- } else if (!strncmp(src, dst, length) &&
- (dst[length] == 0 || dst[length] == '/')) {
+ goto act_on_entry;
+ }
++
++ if (!ignore_sparse)
++ string_list_append(&only_match_skip_worktree, src);
++ else
++ modes[i] = SPARSE;
++ goto act_on_entry;
+ }
+ if (!strncmp(src, dst, length) &&
+ (dst[length] == 0 || dst[length] == '/')) {
## t/t7002-mv-sparse-checkout.sh ##
@@ t/t7002-mv-sparse-checkout.sh: test_expect_failure 'can move out-of-cone directory with --sparse' '
@@ t/t7002-mv-sparse-checkout.sh: test_expect_failure 'can move out-of-cone directo
-test_expect_failure 'refuse to move out-of-cone file without --sparse' '
+test_expect_success 'refuse to move out-of-cone file without --sparse' '
- git sparse-checkout disable &&
- git reset --hard &&
- mkdir folder1 &&
+ test_when_finished "cleanup_sparse_checkout" &&
+ setup_sparse_checkout &&
+
@@ t/t7002-mv-sparse-checkout.sh: test_expect_failure 'refuse to move out-of-cone file without --sparse' '
test_cmp expect stderr
'
-test_expect_failure 'can move out-of-cone file with --sparse' '
+test_expect_success 'can move out-of-cone file with --sparse' '
- git sparse-checkout disable &&
- git reset --hard &&
- mkdir folder1 &&
+ test_when_finished "cleanup_sparse_checkout" &&
+ setup_sparse_checkout &&
+
3: 04572e5e6b ! 4: d0de7678e3 mv: check if <destination> exists in index to handle overwriting
@@ Commit message
## builtin/mv.c ##
@@ builtin/mv.c: int cmd_mv(int argc, const char **argv, const char *prefix)
-
- length = strlen(src);
- if (lstat(src, &st) < 0) {
-- /*
-- * TODO: for now, when you try to overwrite a <destination>
-- * with your <source> as a sparse file, if you supply a "--sparse"
-- * flag, then the action will be done without providing "--force"
-- * and no warning.
-- *
-- * This is mainly because the sparse <source>
-- * is not on-disk, and this if-else chain will be cut off early in
-- * this check, thus the "--force" check is ignored. Need fix.
-- */
-
- int pos = cache_name_pos(src, length);
- if (pos >= 0) {
-@@ builtin/mv.c: int cmd_mv(int argc, const char **argv, const char *prefix)
- if (ce_skip_worktree(ce)) {
- if (!ignore_sparse)
- string_list_append(&only_match_skip_worktree, src);
-- else
-- modes[i] = SPARSE;
-+ else {
-+ /* Check if dst exists in index */
-+ if (cache_name_pos(dst, strlen(dst)) >= 0) {
-+ if (force)
-+ modes[i] = SPARSE;
-+ else
-+ bad = _("destination exists");
-+ }
-+ else
-+ modes[i] = SPARSE;
-+ }
- }
- else
- bad = _("bad source");
+ bad = _("bad source");
+ goto act_on_entry;
+ }
+-
+- if (!ignore_sparse)
++ if (!ignore_sparse) {
+ string_list_append(&only_match_skip_worktree, src);
+- else
++ goto act_on_entry;
++ }
++ /* Check if dst exists in index */
++ if (cache_name_pos(dst, strlen(dst)) < 0) {
+ modes[i] = SPARSE;
++ goto act_on_entry;
++ }
++ if (!force) {
++ bad = _("destination exists");
++ goto act_on_entry;
++ }
++ modes[i] = SPARSE;
+ goto act_on_entry;
+ }
+ if (!strncmp(src, dst, length) &&
## t/t7002-mv-sparse-checkout.sh ##
@@ t/t7002-mv-sparse-checkout.sh: test_expect_success 'can move out-of-cone file with --sparse' '
@@ t/t7002-mv-sparse-checkout.sh: test_expect_success 'can move out-of-cone file wi
-test_expect_failure 'refuse to move sparse file to existing destination' '
+test_expect_success 'refuse to move sparse file to existing destination' '
- git sparse-checkout disable &&
- git reset --hard &&
+ test_when_finished "cleanup_sparse_checkout" &&
mkdir folder1 &&
+ touch folder1/file1 &&
-: ---------- > 5: 70540957b6 mv: use flags mode for update_mode
4: 4eeae40186 ! 6: f8302f64e0 mv: add check_dir_in_index() and solve general dir check issue
@@ Commit message
instead of "bad source"; also user now can supply a "--sparse" flag so
this operation can be carried out successfully.
- Also, as suggested by Derrick [1],
- move the in-line definition of "enum update_mode" to the top
- of the file and make it use "flags" mode (each state is a different
- bit in the word).
-
- [1] https://lore.kernel.org/git/22aadea2-9330-aa9e-7b6a-834585189144@xxxxxxxxxx/
-
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@xxxxxxxxx>
## builtin/mv.c ##
-@@ builtin/mv.c: static const char * const builtin_mv_usage[] = {
- NULL
- };
-
-+enum update_mode {
-+ BOTH = 0,
-+ WORKING_DIRECTORY = (1 << 1),
-+ INDEX = (1 << 2),
-+ SPARSE = (1 << 3),
-+ SKIP_WORKTREE_DIR = (1 << 4),
-+};
-+
- #define DUP_BASENAME 1
- #define KEEP_TRAILING_SLASH 2
-
@@ builtin/mv.c: static int index_range_of_same_dir(const char *src, int length,
return last - first;
}
@@ builtin/mv.c: static int index_range_of_same_dir(const char *src, int length,
{
int i, flags, gitmodules_modified = 0;
@@ builtin/mv.c: int cmd_mv(int argc, const char **argv, const char *prefix)
- OPT_END(),
- };
- const char **source, **destination, **dest_path, **submodule_gitfile;
-- enum update_mode { BOTH = 0, WORKING_DIRECTORY, INDEX, SPARSE } *modes;
-+ enum update_mode *modes;
- struct stat st;
- struct string_list src_for_dst = STRING_LIST_INIT_NODUP;
- struct lock_file lock_file = LOCK_INIT;
-@@ builtin/mv.c: int cmd_mv(int argc, const char **argv, const char *prefix)
- if (lstat(src, &st) < 0) {
-
- int pos = cache_name_pos(src, length);
-+ const char *src_w_slash = add_slash(src);
-+
- if (pos >= 0) {
- const struct cache_entry *ce = active_cache[pos];
+ /* Checking */
+ for (i = 0; i < argc; i++) {
+ const char *src = source[i], *dst = destination[i];
+- int length, src_is_dir;
++ int length;
+ const char *bad = NULL;
+ int skip_sparse = 0;
@@ builtin/mv.c: int cmd_mv(int argc, const char **argv, const char *prefix)
- else
+
+ pos = cache_name_pos(src, length);
+ if (pos < 0) {
++ const char *src_w_slash = add_slash(src);
++ if (!check_dir_in_index(src, length) &&
++ !path_in_sparse_checkout(src_w_slash, &the_index)) {
++ modes[i] |= SKIP_WORKTREE_DIR;
++ goto dir_check;
++ }
+ /* only error if existence is expected. */
+ if (!(modes[i] & SPARSE))
bad = _("bad source");
+ goto act_on_entry;
}
-+ else if (!check_dir_in_index(src, length) &&
-+ !path_in_sparse_checkout(src_w_slash, &the_index)) {
-+ modes[i] = SKIP_WORKTREE_DIR;
-+ goto dir_check;
-+ }
- /* only error if existence is expected. */
- else if (modes[i] != SPARSE)
+-
+ ce = active_cache[pos];
+ if (!ce_skip_worktree(ce)) {
bad = _("bad source");
@@ builtin/mv.c: int cmd_mv(int argc, const char **argv, const char *prefix)
- && lstat(dst, &st) == 0)
+ bad = _("can not move directory into itself");
+ goto act_on_entry;
+ }
+- if ((src_is_dir = S_ISDIR(st.st_mode))
++ if (S_ISDIR(st.st_mode)
+ && lstat(dst, &st) == 0) {
bad = _("cannot move directory over file");
- else if (src_is_dir) {
+ goto act_on_entry;
+ }
+- if (src_is_dir) {
++
++dir_check:
++ if (S_ISDIR(st.st_mode)) {
+ int j, dst_len, n;
- int first = cache_name_pos(src, length), last;
+ int first, last;
-+dir_check:
+ first = cache_name_pos(src, length);
- if (first >= 0)
+ if (first >= 0) {
prepare_move_submodule(src, first,
-@@ builtin/mv.c: int cmd_mv(int argc, const char **argv, const char *prefix)
- else { /* last - first >= 1 */
- int j, dst_len, n;
-
-- modes[i] = WORKING_DIRECTORY;
-+ if (!modes[i])
-+ modes[i] |= WORKING_DIRECTORY;
- n = argc + last - first;
- REALLOC_ARRAY(source, n);
- REALLOC_ARRAY(destination, n);
-@@ builtin/mv.c: int cmd_mv(int argc, const char **argv, const char *prefix)
- printf(_("Renaming %s to %s\n"), src, dst);
- if (show_only)
- continue;
-- if (mode != INDEX && mode != SPARSE && rename(src, dst) < 0) {
-+ if (!(mode & (INDEX | SPARSE | SKIP_WORKTREE_DIR)) &&
-+ rename(src, dst) < 0) {
- if (ignore_errors)
- continue;
- die_errno(_("renaming '%s' failed"), src);
-@@ builtin/mv.c: int cmd_mv(int argc, const char **argv, const char *prefix)
- 1);
- }
-
-- if (mode == WORKING_DIRECTORY)
-+ if (mode & (WORKING_DIRECTORY | SKIP_WORKTREE_DIR))
- continue;
-
- pos = cache_name_pos(src, strlen(src));
## t/t7002-mv-sparse-checkout.sh ##
@@ t/t7002-mv-sparse-checkout.sh: test_expect_success 'refuse to move file to non-skip-worktree sparse path' '
@@ t/t7002-mv-sparse-checkout.sh: test_expect_success 'refuse to move file to non-s
-test_expect_failure 'refuse to move out-of-cone directory without --sparse' '
+test_expect_success 'refuse to move out-of-cone directory without --sparse' '
- git sparse-checkout disable &&
- git reset --hard &&
- mkdir folder1 &&
+ test_when_finished "cleanup_sparse_checkout" &&
+ setup_sparse_checkout &&
+
@@ t/t7002-mv-sparse-checkout.sh: test_expect_failure 'refuse to move out-of-cone directory without --sparse' '
test_cmp expect stderr
'
-test_expect_failure 'can move out-of-cone directory with --sparse' '
+test_expect_success 'can move out-of-cone directory with --sparse' '
- git sparse-checkout disable &&
- git reset --hard &&
- mkdir folder1 &&
+ test_when_finished "cleanup_sparse_checkout" &&
+ setup_sparse_checkout &&
+
5: a3a296c3ef ! 7: bc996931e2 mv: use update_sparsity() after touching sparse contents
@@ Metadata
Author: Shaoxuan Yuan <shaoxuan.yuan02@xxxxxxxxx>
## Commit message ##
- mv: use update_sparsity() after touching sparse contents
+ mv: update sparsity after moving from out-of-cone to in-cone
- Originally, "git mv" a sparse file/directory from out/in-cone to
- in/out-cone does not update the sparsity following the sparse-checkout
- patterns.
+ Originally, "git mv" a sparse file from out-of-cone to
+ in-cone does not update the moved file's sparsity (remove its
+ SKIP_WORKTREE bit). And the corresponding cache entry is, unexpectedly,
+ not checked out in the working tree.
- Use update_sparsity() after touching sparse contents, so the sparsity
- will be updated after the move.
+ Update the behavior so that:
+ 1. Moving from out-of-cone to in-cone removes the SKIP_WORKTREE bit from
+ corresponding cache entry.
+ 2. The moved cache entry is checked out in the working tree to reflect
+ the updated sparsity.
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@xxxxxxxxx>
@@ builtin/mv.c
#include "string-list.h"
#include "parse-options.h"
#include "submodule.h"
-+#include "unpack-trees.h"
++#include "entry.h"
static const char * const builtin_mv_usage[] = {
N_("git mv [<options>] <source>... <destination>"),
-@@ builtin/mv.c: int cmd_mv(int argc, const char **argv, const char *prefix)
- {
- int i, flags, gitmodules_modified = 0;
- int verbose = 0, show_only = 0, force = 0, ignore_errors = 0, ignore_sparse = 0;
-+ int sparse_moved = 0;
- struct option builtin_mv_options[] = {
- OPT__VERBOSE(&verbose, N_("be verbose")),
- OPT__DRY_RUN(&show_only, N_("dry run")),
@@ builtin/mv.c: int cmd_mv(int argc, const char **argv, const char *prefix)
const char *src = source[i], *dst = destination[i];
enum update_mode mode = modes[i];
int pos;
-+ if (!sparse_moved && mode & (SPARSE | SKIP_WORKTREE_DIR))
-+ sparse_moved = 1;
++ struct checkout state = CHECKOUT_INIT;
++ state.istate = &the_index;
++
++ if (force)
++ state.force = 1;
if (show_only || verbose)
printf(_("Renaming %s to %s\n"), src, dst);
if (show_only)
@@ builtin/mv.c: int cmd_mv(int argc, const char **argv, const char *prefix)
+ pos = cache_name_pos(src, strlen(src));
+ assert(pos >= 0);
rename_cache_entry_at(pos, dst);
++
++ if (mode & SPARSE) {
++ if (path_in_sparse_checkout(dst, &the_index)) {
++ int dst_pos;
++
++ dst_pos = cache_name_pos(dst, strlen(dst));
++ active_cache[dst_pos]->ce_flags &= ~CE_SKIP_WORKTREE;
++
++ if (checkout_entry(active_cache[dst_pos], &state, NULL, NULL))
++ die(_("cannot checkout %s"), ce->name);
++ }
++ }
}
-+ if (sparse_moved) {
-+ struct unpack_trees_options o;
-+ memset(&o, 0, sizeof(o));
-+ o.verbose_update = isatty(2);
-+ o.update = 1;
-+ o.head_idx = -1;
-+ o.src_index = &the_index;
-+ o.dst_index = &the_index;
-+ o.skip_sparse_checkout = 0;
-+ o.pl = the_index.sparse_checkout_patterns;
-+ setup_unpack_trees_porcelain(&o, "mv");
-+ update_sparsity(&o);
-+ clear_unpack_trees_porcelain(&o);
-+ }
-+
if (gitmodules_modified)
- stage_updated_gitmodules(&the_index);
-
## t/t7002-mv-sparse-checkout.sh ##
+@@ t/t7002-mv-sparse-checkout.sh: test_expect_success 'can move out-of-cone directory with --sparse' '
+ git mv --sparse folder1 sub 1>actual 2>stderr &&
+ test_must_be_empty stderr &&
+
+- git sparse-checkout reapply &&
+ test_path_is_dir sub/folder1 &&
+ test_path_is_file sub/folder1/file1
+ '
+@@ t/t7002-mv-sparse-checkout.sh: test_expect_success 'can move out-of-cone file with --sparse' '
+ git mv --sparse folder1/file1 sub 1>actual 2>stderr &&
+ test_must_be_empty stderr &&
+
+- git sparse-checkout reapply &&
+ ! test_path_is_dir sub/folder1 &&
+ test_path_is_file sub/file1
+ '
@@ t/t7002-mv-sparse-checkout.sh: test_expect_success 'refuse to move sparse file to existing destination' '
test_cmp expect stderr
'
-+# Need fix.
-+#
-+# The *expected* behavior:
-+#
-+# Using --sparse to accept a sparse file, --force to overwrite the destination.
-+# The folder1/file1 should replace the sub/file1 without error.
-+#
-+# The *actual* behavior:
-+#
-+# It emits a warning:
-+#
-+# warning: Path ' sub/file1
-+# ' already present; will not overwrite with sparse update.
-+# After fixing the above paths, you may want to run `git sparse-checkout
-+# reapply`.
-+
- test_expect_failure 'move sparse file to existing destination with --force and --sparse' '
- git sparse-checkout disable &&
- git reset --hard &&
+-test_expect_failure 'move sparse file to existing destination with --force and --sparse' '
++test_expect_success 'move sparse file to existing destination with --force and --sparse' '
+ test_when_finished "cleanup_sparse_checkout" &&
+ mkdir folder1 &&
+ touch folder1/file1 &&
base-commit: 4f6db706e6ad145a9bf6b26a1ca0970bed27bb72
--
2.35.1
