On Mon, May 23, 2022 at 4:07 PM Ævar Arnfjörð Bjarmason
<avarab@xxxxxxxxx> wrote:
>
>
> On Mon, May 23 2022, Jiang Xin wrote:
>
> > From: Ævar Arnfjörð Bjarmason <avarab@xxxxxxxxx>
> >
> > Before commit fc0fd5b23b (Makefile: help gettext tools to cope with our
> > custom PRItime format, 2017-07-20) we'd consider source files as-is
> > with gettext, but because we need to understand PRItime in the same way
> > that gettext itself understands PRIuMAX we'd first check if we had a
> > clean checkout, then munge all of the processed files in-place with
> > "sed", generate "po/git.pot", and then finally "reset --hard" to undo
> > our changes.
> >
> > By generating "pot" snippets in ".build/pot/po" for each source file
> > and rewriting certain source files with PRItime macros to temporary
> > files in ".build/pot/po", we can avoid running "make pot" by altering
> > files in place and doing a "reset --hard" afterwards.
> >
> > This speed of "make pot" is slower than before on an initial run,
> > because we run "xgettext" many times (once per source file), but it
> > can be boosted by parallelization. It is *much* faster for incremental
> > runs, and will allow us to implement related targets in subsequent
> > commits.
> >
> > When the "pot" target was originally added in cd5513a7168 (i18n:
> > Makefile: "pot" target to extract messages marked for translation,
> > 2011-02-22) it behaved like a "normal" target. I.e. we'd skip the
> > re-generation of the po/git.pot if nothing had to be done.
> >
> > Then after po/git.pot was checked in in dce37b66fb0 (l10n: initial
> > git.pot for 1.7.10 upcoming release, 2012-02-13) the target was broken
> > until 1f31963e921 (i18n: treat "make pot" as an explicitly-invoked
> > target, 2014-08-22) when it was made to depend on "FORCE". I.e. the
> > Makefile's dependency resolution inherently can't handle incremental
> > building when the target file may be updated by git (or something else
> > external to "make"). But this case no longer applies, so FORCE is no
> > longer needed.
> >
> > That out of the way, the main logic change here is getting rid of the
> > "reset --hard":
> >
> > We'll generate intermediate ".build/pot/po/%.po" files from "%", which
> > is handy to see at a glance what strings (if any) in a given file are
> > marked for translation:
> >
> > $ make .build/pot/po/pretty.c.po
> > [...]
> > $ cat .build/pot/po/pretty.c.po
> > #: pretty.c:1051
> > msgid "unable to parse --pretty format"
> > msgstr ""
> > $
> >
> > For these C source files which contain the PRItime macros, we will
> > create temporary munged "*.c" files in a tree in ".build/pot/po"
> > corresponding to our source tree, and have "xgettext" consider those.
> > The rule needs to be careful to "(cd .build/pot/po && ...)", because
> > otherwise the comments in the po/git.pot file wouldn't refer to the
> > correct source locations (they'd be prefixed with ".build/pot/po").
> > These temporary munged "*.c” files will be removed immediately after
> > the corresponding po files are generated, because some development tools
> > cannot ignore the duplicate source files in the ".build" directory
> > according to the ".gitignore" file, and that may cause trouble.
> >
> > The output of the generated po/git.pot file is changed in one minor
> > way: Because we're using msgcat(1) instead of xgettext(1) to
> > concatenate the output we'll now disambiguate where "TRANSLATORS"
> > comments come from, in cases where a message is the same in N files,
> > and either only one has a "TRANSLATORS" comment, or they're
> > different. E.g. for the "Your edited hunk[...]" message we'll now
> > apply this change (comment content elided):
> >
> > +#. #-#-#-#-# add-patch.c.po #-#-#-#-#
> > #. TRANSLATORS: do not translate [y/n]
> > [...]
> > +#. #-#-#-#-# git-add--interactive.perl.po #-#-#-#-#
> > #. TRANSLATORS: do not translate [y/n]
> > [...]
> > #: add-patch.c:1253 git-add--interactive.perl:1244
> > msgid ""
> > "Your edited hunk does not apply. Edit again (saying \"no\" discards!) [y/n]? "
> > msgstr ""
> >
> > There are six such changes, and they all make the context more
> > understandable, as msgcat(1) is better at handling these edge cases
> > than xgettext(1)'s previously used "--join-existing" flag.
> >
> > But filenames in the above disambiguation lines of extracted-comments
> > have an extra ".po" extension compared to the filenames at the file
> > locations. While we could rename the intermediate ".build/pot/po/%.po"
> > files without the ".po" extension to use more intuitive filenames in
> > the disambiguation lines of extracted-comments, but that will confuse
> > developer tools with lots of invalid C or other source files in
> > ".build/pot/po" directory.
> >
> > The addition of "--omit-header" option for xgettext makes the "pot"
> > snippets in ".build/pot/po/*.po" smaller. But as we'll see in a
> > subsequent commit this header behavior has been hiding an
> > encoding-related bug from us, so let's carry it forward instead of
> > re-generating it with xgettext(1).
> >
> > The "po/git.pot" file should have a header entry, because a proper
> > header entry will increase the speed of creating a new po file using
> > msginit and set a proper "POT-Creation-Date:" field in the header
> > entry of a "po/XX.po" file. We use xgettext to generate a separate
> > header file at ".build/pot/git.header" from "/dev/null", and use this
> > header to assemble "po/git.pot".
> >
> > Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@xxxxxxxxx>
> > Signed-off-by: Jiang Xin <zhiyou.jx@xxxxxxxxxxxxxxx>
> > Signed-off-by: Junio C Hamano <gitster@xxxxxxxxx>
> > ---
> > .gitignore | 1 +
> > Makefile | 80 ++++++++++++++++++++++++++++++++++++++++--------------
> > 2 files changed, 60 insertions(+), 21 deletions(-)
> >
> > diff --git a/.gitignore b/.gitignore
> > index e81de1063a..a452215764 100644
> > --- a/.gitignore
> > +++ b/.gitignore
> > @@ -200,6 +200,7 @@
> > *.[aos]
> > *.o.json
> > *.py[co]
> > +.build/
> > .depend/
> > *.gcda
> > *.gcno
> > diff --git a/Makefile b/Makefile
> > index 46914dcd80..1962999c18 100644
> > --- a/Makefile
> > +++ b/Makefile
> > @@ -569,6 +569,7 @@ INSTALL = install
> > TCL_PATH = tclsh
> > TCLTK_PATH = wish
> > XGETTEXT = xgettext
> > +MSGCAT = msgcat
> > MSGFMT = msgfmt
> > CURL_CONFIG = curl-config
> > GCOV = gcov
> > @@ -2706,6 +2707,7 @@ XGETTEXT_FLAGS = \
> > --force-po \
> > --add-comments=TRANSLATORS: \
> > --msgid-bugs-address="Git Mailing List <git@xxxxxxxxxxxxxxx>" \
> > + --package-name=Git \
> > --sort-by-file \
> > --from-code=UTF-8
> > XGETTEXT_FLAGS_C = $(XGETTEXT_FLAGS) --language=C \
> > @@ -2714,6 +2716,7 @@ XGETTEXT_FLAGS_SH = $(XGETTEXT_FLAGS) --language=Shell \
> > --keyword=gettextln --keyword=eval_gettextln
> > XGETTEXT_FLAGS_PERL = $(XGETTEXT_FLAGS) --language=Perl \
> > --keyword=__ --keyword=N__ --keyword="__n:1,2"
> > +MSGCAT_FLAGS = --sort-by-file
> > LOCALIZED_C = $(FOUND_C_SOURCES) $(FOUND_H_SOURCES) $(SCALAR_SOURCES) \
> > $(GENERATED_H)
> > LOCALIZED_SH = $(SCRIPT_SH)
> > @@ -2726,34 +2729,68 @@ LOCALIZED_SH += t/t0200/test.sh
> > LOCALIZED_PERL += t/t0200/test.perl
> > endif
> >
> > -## Note that this is meant to be run only by the localization coordinator
> > -## under a very controlled condition, i.e. (1) it is to be run in a
> > -## Git repository (not a tarball extract), (2) any local modifications
> > -## will be lost.
> > +## We generate intermediate .build/pot/po/%.po files containing a
> > +## extract of the translations we find in each file in the source
> > +## tree. We will assemble them using msgcat to create the final
> > +## "po/git.pot" file.
> > +LOCALIZED_ALL_GEN_PO =
> > +
> > +LOCALIZED_C_GEN_PO = $(LOCALIZED_C:%=.build/pot/po/%.po)
> > +LOCALIZED_ALL_GEN_PO += $(LOCALIZED_C_GEN_PO)
> > +
> > +LOCALIZED_SH_GEN_PO = $(LOCALIZED_SH:%=.build/pot/po/%.po)
> > +LOCALIZED_ALL_GEN_PO += $(LOCALIZED_SH_GEN_PO)
> > +
> > +LOCALIZED_PERL_GEN_PO = $(LOCALIZED_PERL:%=.build/pot/po/%.po)
> > +LOCALIZED_ALL_GEN_PO += $(LOCALIZED_PERL_GEN_PO)
> > +
> > ## Gettext tools cannot work with our own custom PRItime type, so
> > ## we replace PRItime with PRIuMAX. We need to update this to
> > ## PRIdMAX if we switch to a signed type later.
> > +$(LOCALIZED_C_GEN_PO): .build/pot/po/%.po: %
> > + $(call mkdir_p_parent_template)
> > + $(QUIET_XGETTEXT) \
> > + if grep -q PRItime $<; then \
> > + (\
> > + sed -e 's|PRItime|PRIuMAX|g' <$< \
> > + >.build/pot/po/$< && \
> > + cd .build/pot/po && \
> > + $(XGETTEXT) --omit-header \
> > + -o $(@:.build/pot/po/%=%) \
> > + $(XGETTEXT_FLAGS_C) $< && \
> > + rm $<; \
> > + ); \
> > + else \
> > + $(XGETTEXT) --omit-header \
> > + -o $@ $(XGETTEXT_FLAGS_C) $<; \
> > + fi
> >
> > -po/git.pot: $(GENERATED_H) FORCE
> > - # All modifications will be reverted at the end, so we do not
> > - # want to have any local change.
> > - git diff --quiet HEAD && git diff --quiet --cached
> > +$(LOCALIZED_SH_GEN_PO): .build/pot/po/%.po: %
> > + $(call mkdir_p_parent_template)
> > + $(QUIET_XGETTEXT)$(XGETTEXT) --omit-header \
> > + -o$@ $(XGETTEXT_FLAGS_SH) $<
> >
> > - @for s in $(LOCALIZED_C) $(LOCALIZED_SH) $(LOCALIZED_PERL); \
> > - do \
> > - sed -e 's|PRItime|PRIuMAX|g' <"$$s" >"$$s+" && \
> > - cat "$$s+" >"$$s" && rm "$$s+"; \
> > - done
> > +$(LOCALIZED_PERL_GEN_PO): .build/pot/po/%.po: %
> > + $(call mkdir_p_parent_template)
> > + $(QUIET_XGETTEXT)$(XGETTEXT) --omit-header \
> > + -o$@ $(XGETTEXT_FLAGS_PERL) $<
> > +q
> > +define gen_pot_header
> > +$(XGETTEXT) $(XGETTEXT_FLAGS_C) \
> > + -o - /dev/null | \
> > +sed -e 's|charset=CHARSET|charset=UTF-8|' \
> > + -e 's|\(Last-Translator: \)FULL NAME <.*>|\1make by the Makefile|' \
> > + -e 's|\(Language-Team: \)LANGUAGE <.*>|\1Git Mailing List <git@xxxxxxxxxxxxxxx>|' \
> > + >$@ && \
> > +echo '"Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\\n"' >>$@
> > +endef
> >
> > - $(QUIET_XGETTEXT)$(XGETTEXT) -o$@+ $(XGETTEXT_FLAGS_C) $(LOCALIZED_C)
> > - $(QUIET_XGETTEXT)$(XGETTEXT) -o$@+ --join-existing $(XGETTEXT_FLAGS_SH) \
> > - $(LOCALIZED_SH)
> > - $(QUIET_XGETTEXT)$(XGETTEXT) -o$@+ --join-existing $(XGETTEXT_FLAGS_PERL) \
> > - $(LOCALIZED_PERL)
> > +.build/pot/git.header: $(LOCALIZED_ALL_GEN_PO)
> > + $(call mkdir_p_parent_template)
> > + $(QUIET_GEN)$(gen_pot_header)
>
> So re a previous round I think the addition of a header to po/git.pot
> doesn't make sense, i.e. it's not needed, so we can just drop this
> entirely.
>
> But if you really want to include it anyway then this dependency is
> broken, the header just depends on this gen_pot_header you've defined,
> we don't need to re-generate it every time any single source file
> changes.
>
> Or is the intent to have its timestamp bumped if any of the source files
> change?
>
> If so I think that to the extent we need headers at all (for the *.po
> files) it might be worthwhile to just have the timestamp be the same
> epoch we use for the tests in t/, i.e. never update it and avoid the
> needless churn. If people need to check when things were last changed,
> or initially added, they can use this little thing called "git" :)
After rereading all the replies, I feel it's better to to leave a note
here to make my point clear. As we removed the "po/git.pot" file, it
is not easy to find the base version of a "po/XX.po" file, and we need
the "POT-Creation-Date:" field which comes from the header of the
generated POT file to tell us the version of the base.
$ git -P grep POT-Creation-Date -- po/
po/bg.po:"POT-Creation-Date: 2022-01-17 08:34+0800\n"
po/ca.po:"POT-Creation-Date: 2022-04-06 14:40+0800\n"
po/de.po:"POT-Creation-Date: 2022-04-13 14:52+0800\n"
po/el.po:"POT-Creation-Date: 2019-02-15 10:09+0800\n"
po/es.po:"POT-Creation-Date: 2021-11-04 08:34+0800\n"
po/fr.po:"POT-Creation-Date: 2022-04-13 14:52+0800\n"
po/id.po:"POT-Creation-Date: 2022-04-13 14:52+0800\n"
po/is.po:"POT-Creation-Date: 2016-06-17 18:55+0000\n"
po/it.po:"POT-Creation-Date: 2020-10-10 09:32+0800\n"
po/ko.po:"POT-Creation-Date: 2018-06-16 22:06+0800\n"
po/pl.po:"POT-Creation-Date: 2021-11-10 08:55+0800\n"
po/pt_PT.po:"POT-Creation-Date: 2022-04-13 14:52+0800\n"
po/ru.po:"POT-Creation-Date: 2020-12-21 07:10+0800\n"
po/sv.po:"POT-Creation-Date: 2022-04-13 14:52+0800\n"
po/tr.po:"POT-Creation-Date: 2022-04-13 14:52+0800\n"
po/vi.po:"POT-Creation-Date: 2022-04-13 14:52+0800\n"
po/zh_CN.po:"POT-Creation-Date: 2022-04-13 14:52+0800\n"
po/zh_TW.po:"POT-Creation-Date: 2022-04-13 14:52+0800\n"
