[PATCH v3 8/9] Makefile: add "po-init" rule to initialize po/XX.po

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Ævar Arnfjörð Bjarmason <avarab@xxxxxxxxx>

The core translation is the minimum set of work that must be done for a
new language translation.

There are over 5000 messages in the template message file "po/git.pot"
that need to be translated. It is not a piece of cake for such a huge
workload. So we used to define a small set of messages called "core
translation" that a new l10n contributor must complete before sending
pull request to the l10n coordinator.

By pulling in some parts of the git-po-helper[^1] logic, we add rule
"core-pot" to create this core translation message "po/git-core.pot":

    make core-pot

To help new l10n contributors to initialized their "po/XX.pot" from
"po/git-core.pot", we also add new rules "po-init":

    make po-init PO_FILE=po/XX.po

[^1]: https://github.com/git-l10n/git-po-helper/

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@xxxxxxxxx>
Signed-off-by: Jiang Xin <zhiyou.jx@xxxxxxxxxxxxxxx>
Signed-off-by: Junio C Hamano <gitster@xxxxxxxxx>
---
 Makefile      | 41 +++++++++++++++++++++++++++++++++++++++++
 po/.gitignore |  1 +
 shared.mak    |  1 +
 3 files changed, 43 insertions(+)

diff --git a/Makefile b/Makefile
index 09cbde4c2a..d3eae150de 100644
--- a/Makefile
+++ b/Makefile
@@ -2808,6 +2808,7 @@ po-update: po/git.pot
 	$(check_po_file_envvar)
 	@if test ! -e $(PO_FILE); then \
 		echo >&2 "error: $(PO_FILE) does not exist"; \
+		echo >&2 'To create an initial po file, use: "make po-init PO_FILE=po/XX.po"'; \
 		exit 1; \
 	fi
 	$(QUIET_MSGMERGE)$(MSGMERGE) $(MSGMERGE_FLAGS) $(PO_FILE) po/git.pot
@@ -2815,6 +2816,46 @@ po-update: po/git.pot
 .PHONY: check-pot
 check-pot: $(LOCALIZED_ALL_GEN_PO)
 
+### TODO FIXME: Translating everything in these files is a bad
+### heuristic for "core", as we'll translate obscure error() messages
+### along with commonly seen i18n messages. A better heuristic would
+### be to e.g. use spatch to first remove error/die/warning
+### etc. messages.
+LOCALIZED_C_CORE =
+LOCALIZED_C_CORE += builtin/checkout.c
+LOCALIZED_C_CORE += builtin/clone.c
+LOCALIZED_C_CORE += builtin/index-pack.c
+LOCALIZED_C_CORE += builtin/push.c
+LOCALIZED_C_CORE += builtin/reset.c
+LOCALIZED_C_CORE += remote.c
+LOCALIZED_C_CORE += wt-status.c
+
+LOCALIZED_C_CORE_GEN_PO = $(LOCALIZED_C_CORE:%=.build/pot/po/%.po)
+
+.PHONY: core-pot
+core-pot: po/git-core.pot
+
+.build/pot/git-core.header: $(LOCALIZED_C_CORE_GEN_PO)
+	$(call mkdir_p_parent_template)
+	$(QUIET_GEN)$(gen_pot_header)
+
+po/git-core.pot: .build/pot/git-core.header $(LOCALIZED_C_CORE_GEN_PO)
+	$(QUIET_GEN)$(MSGCAT) $(MSGCAT_FLAGS) $^ >$@
+
+.PHONY: po-init
+po-init: po/git-core.pot
+	$(check_po_file_envvar)
+	@if test -e $(PO_FILE); then \
+		echo >&2 "error: $(PO_FILE) exists already"; \
+		exit 1; \
+	fi
+	$(QUIET_MSGINIT)msginit \
+		--input=$< \
+		--output=$(PO_FILE) \
+		--no-translator \
+		--locale=$(PO_FILE:po/%.po=%)
+
+## po/*.po files & their rules
 ifdef NO_GETTEXT
 POFILES :=
 MOFILES :=
diff --git a/po/.gitignore b/po/.gitignore
index 37d1301b32..ff0e5176a6 100644
--- a/po/.gitignore
+++ b/po/.gitignore
@@ -1,2 +1,3 @@
 /build
 /git.pot
+/git-core.pot
diff --git a/shared.mak b/shared.mak
index 8cd170a7e7..4330192e9c 100644
--- a/shared.mak
+++ b/shared.mak
@@ -62,6 +62,7 @@ ifndef V
 	QUIET_BUILT_IN = @echo '   ' BUILTIN $@;
 	QUIET_LNCP     = @echo '   ' LN/CP $@;
 	QUIET_XGETTEXT = @echo '   ' XGETTEXT $@;
+	QUIET_MSGINIT  = @echo '   ' MSGINIT $@;
 	QUIET_MSGFMT   = @echo '   ' MSGFMT $@;
 	QUIET_MSGMERGE = @echo '   ' MSGMERGE $@;
 	QUIET_GCOV     = @echo '   ' GCOV $@;
-- 
2.36.0.1.g15c4090757




[Index of Archives]     [Linux Kernel Development]     [Gcc Help]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [V4L]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]     [Fedora Users]

  Powered by Linux