Hi John
This is looking good. I think the only thing that is missing (and which
I should have realized earlier) is that there are no tests for valid or
invalid format arguments to --batch-command. I haven't checked but there
must be some other tests in the t1006 that we can piggy back on to add
that. I've left some stylistic comments below but I don't fell strongly
about them apart from the README comment so please don't feel obliged to
act on them, it's looking pretty good as is.
Best Wishes
Phillip
On 16/02/2022 20:59, John Cai via GitGitGadget wrote:
From: John Cai <johncai86@xxxxxxxxx>
Add a new flag --batch-command that accepts commands and arguments
from stdin, similar to git-update-ref --stdin.
At GitLab, we use a pair of long running cat-file processes when
accessing object content. One for iterating over object metadata with
--batch-check, and the other to grab object contents with --batch.
However, if we had --batch-command, we wouldn't need to keep both
processes around, and instead just have one --batch-command process
where we can flip between getting object info, and getting object
contents. Since we have a pair of cat-file processes per repository,
this means we can get rid of roughly half of long lived git cat-file
processes. Given there are many repositories being accessed at any given
time, this can lead to huge savings.
git cat-file --batch-command
will enter an interactive command mode whereby the user can enter in
commands and their arguments that get queued in memory:
<command1> [arg1] [arg2] LF
<command2> [arg1] [arg2] LF
When --buffer mode is used, commands will be queued in memory until a
flush command is issued that execute them:
flush LF
The reason for a flush command is that when a consumer process (A)
talks to a git cat-file process (B) and interactively writes to and
reads from it in --buffer mode, (A) needs to be able to control when
the buffer is flushed to stdout.
Currently, from (A)'s perspective, the only way is to either
1. kill (B)'s process
2. send an invalid object to stdin.
1. is not ideal from a performance perspective as it will require
spawning a new cat-file process each time, and 2. is hacky and not a
good long term solution.
With this mechanism of queueing up commands and letting (A) issue a
flush command, process (A) can control when the buffer is flushed and
can guarantee it will receive all of the output when in --buffer mode.
--batch-command also will not allow (B) to flush to stdout until a flush
is received.
This patch adds the basic structure for adding command which can be
extended in the future to add more commands. It also adds the following
two commands (on top of the flush command):
contents <object> LF
info <object> LF
The contents command takes an <object> argument and prints out the object
contents.
The info command takes an <object> argument and prints out the object
metadata.
These can be used in the following way with --buffer:
info <object> LF
contents <object> LF
contents <object> LF
info <object> LF
flush LF
info <object> LF
flush LF
When used without --buffer:
info <object> LF
contents <object> LF
contents <object> LF
info <object> LF
info <object> LF
Helped-by: Ævar Arnfjörð Bjarmason <avarab@xxxxxxxxx>
Signed-off-by: John Cai <johncai86@xxxxxxxxx>
---
Documentation/git-cat-file.txt | 42 +++++++++-
builtin/cat-file.c | 147 ++++++++++++++++++++++++++++++++-
t/README | 3 +
t/t1006-cat-file.sh | 107 +++++++++++++++++++++++-
4 files changed, 293 insertions(+), 6 deletions(-)
diff --git a/Documentation/git-cat-file.txt b/Documentation/git-cat-file.txt
index bef76f4dd06..70c5b4f12d1 100644
--- a/Documentation/git-cat-file.txt
+++ b/Documentation/git-cat-file.txt
@@ -96,6 +96,33 @@ OPTIONS
need to specify the path, separated by whitespace. See the
section `BATCH OUTPUT` below for details.
+--batch-command::
+--batch-command=<format>::
+ Enter a command mode that reads commands and arguments from stdin. May
+ only be combined with `--buffer`, `--textconv` or `--filters`. In the
+ case of `--textconv` or `--filters`, the input lines also need to specify
+ the path, separated by whitespace. See the section `BATCH OUTPUT` below
+ for details.
++
+`--batch-command` recognizes the following commands:
++
+--
+contents <object>::
+ Print object contents for object reference `<object>`. This corresponds to
+ the output of `--batch`.
+
+info <object>::
+ Print object info for object reference `<object>`. This corresponds to the
+ output of `--batch-check`.
+
+flush::
+ Used with `--buffer` to execute all preceding commands that were issued
+ since the beginning or since the last flush was issued. When `--buffer`
+ is used, no output will come until a `flush` is issued. When `--buffer`
+ is not used, commands are flushed each time without issuing `flush`.
+--
++
+
--batch-all-objects::
Instead of reading a list of objects on stdin, perform the
requested batch operation on all objects in the repository and
@@ -110,7 +137,7 @@ OPTIONS
that a process can interactively read and write from
`cat-file`. With this option, the output uses normal stdio
buffering; this is much more efficient when invoking
- `--batch-check` on a large number of objects.
+ `--batch-check` or `--batch-command` on a large number of objects.
--unordered::
When `--batch-all-objects` is in use, visit objects in an
@@ -202,6 +229,13 @@ from stdin, one per line, and print information about them. By default,
the whole line is considered as an object, as if it were fed to
linkgit:git-rev-parse[1].
+When `--batch-command` is given, `cat-file` will read commands from stdin,
+one per line, and print information based on the command given. With
+`--batch-command`, the `info` command followed by an object will print
+information about the object the same way `--batch-check` would, and the
+`contents` command followed by an object prints contents in the same way
+`--batch` would.
+
You can specify the information shown for each object by using a custom
`<format>`. The `<format>` is copied literally to stdout for each
object, with placeholders of the form `%(atom)` expanded, followed by a
@@ -237,9 +271,9 @@ newline. The available atoms are:
If no format is specified, the default format is `%(objectname)
%(objecttype) %(objectsize)`.
-If `--batch` is specified, the object information is followed by the
-object contents (consisting of `%(objectsize)` bytes), followed by a
-newline.
+If `--batch` is specified, or if `--batch-command` is used with the `contents`
+command, the object information is followed by the object contents (consisting
+of `%(objectsize)` bytes), followed by a newline.
For example, `--batch` without a custom format would produce:
diff --git a/builtin/cat-file.c b/builtin/cat-file.c
index 5e38af82af1..3dc960e9f85 100644
--- a/builtin/cat-file.c
+++ b/builtin/cat-file.c
@@ -20,6 +20,7 @@
enum batch_mode {
BATCH_MODE_CONTENTS,
BATCH_MODE_INFO,
+ BATCH_MODE_QUEUE_AND_DISPATCH,
};
struct batch_options {
@@ -513,6 +514,138 @@ static int batch_unordered_packed(const struct object_id *oid,
data);
}
+typedef void (*parse_cmd_fn_t)(struct batch_options *, const char *,
+ struct strbuf *, struct expand_data *);
+
+struct queued_cmd {
+ parse_cmd_fn_t fn;
+ char *line;
+};
+
+static void parse_cmd_contents(struct batch_options *opt,
+ const char *line,
+ struct strbuf *output,
+ struct expand_data *data)
+{
+ opt->batch_mode = BATCH_MODE_CONTENTS;
+ batch_one_object(line, output, opt, data);
+}
+
+static void parse_cmd_info(struct batch_options *opt,
+ const char *line,
+ struct strbuf *output,
+ struct expand_data *data)
+{
+ opt->batch_mode = BATCH_MODE_INFO;
+ batch_one_object(line, output, opt, data);
+}
+
+static void dispatch_calls(struct batch_options *opt,
+ struct strbuf *output,
+ struct expand_data *data,
+ struct queued_cmd *cmd,
+ int nr)
+{
+ int i;
+
+ if (!opt->buffer_output)
+ die(_("flush is only for --buffer mode"));
+
+ for (i = 0; i < nr; i++)
+ cmd[i].fn(opt, cmd[i].line, output, data);
+
+ fflush(stdout);
+}
+
+static void free_cmds(struct queued_cmd *cmd, int nr)
+{
+ int i;
+
+ for (i = 0; i < nr; i++)
+ FREE_AND_NULL(cmd[i].line);
+}
+
+
+static const struct parse_cmd {
+ const char *name;
+ parse_cmd_fn_t fn;
+ unsigned takes_args;
+} commands[] = {
+ { "contents", parse_cmd_contents, 1},
+ { "info", parse_cmd_info, 1},
+ { "flush", NULL, 0},
+};
+
+static void batch_objects_command(struct batch_options *opt,
+ struct strbuf *output,
+ struct expand_data *data)
+{
+ struct strbuf input = STRBUF_INIT;
+ struct queued_cmd *queued_cmd = NULL;
+ size_t alloc = 0, nr = 0;
+
+ while (!strbuf_getline(&input, stdin)) {
+ int i;
+ const struct parse_cmd *cmd = NULL;
+ const char *p = NULL, *cmd_end;
+ struct queued_cmd call = {0};
+
+ if (!input.len)
+ die(_("empty command in input"));
+ if (isspace(*input.buf))
+ die(_("whitespace before command: '%s'"), input.buf);
+
+ for (i = 0; i < ARRAY_SIZE(commands); i++) {
+ if (!skip_prefix(input.buf, commands[i].name, &cmd_end))
+ continue;
+
+ cmd = &commands[i];
+ if (cmd->takes_args) {
+ if (*cmd_end != ' ')
+ die(_("%s requires arguments"),
+ commands[i].name);
+
+ p = cmd_end + 1;
+ } else if (*cmd_end) {
+ die(_("%s takes no arguments"),
+ commands[i].name);
+ }
+
+ break;
+ }
+
+ if (!cmd)
+ die(_("unknown command: '%s'"), input.buf);
+
+ if (!strcmp(cmd->name, "flush")) {
+ dispatch_calls(opt, output, data, queued_cmd, nr);
+ free_cmds(queued_cmd, nr);
+ nr = 0;
It'd be nice if free_cmds() zeroed nr for us rather than having to
remember to do it separately as the two are intimately linked.
+ continue;
+ }
+
+ if (!opt->buffer_output) {
+ cmd->fn(opt, p, output, data);
+ continue;
+ }
+
+ ALLOC_GROW(queued_cmd, nr + 1, alloc);
+ call.fn = cmd->fn;
+ call.line = xstrdup_or_null(p);
+ queued_cmd[nr++] = call;
I found this a bit confusing to follow with all the "continue"s for me
it would be easier to follow if this was written as
if (!strcmp(cmd->name, "flush") {
...
} else if (!opt->buffer_output) {
...
} else {
ALLOC_GROW ...
}
+ }
+
+ if (opt->buffer_output &&
+ nr &&
+ !git_env_bool("GIT_TEST_CAT_FILE_NO_FLUSH_ON_EXIT", 0)) {
+ dispatch_calls(opt, output, data, queued_cmd, nr);
+ free_cmds(queued_cmd, nr);
+ }
+
+ free(queued_cmd);
+ strbuf_release(&input);
+}
+
static int batch_objects(struct batch_options *opt)
{
struct strbuf input = STRBUF_INIT;
@@ -595,6 +728,11 @@ static int batch_objects(struct batch_options *opt)
save_warning = warn_on_object_refname_ambiguity;
warn_on_object_refname_ambiguity = 0;
+ if (opt->batch_mode == BATCH_MODE_QUEUE_AND_DISPATCH) {
+ batch_objects_command(opt, &output, &data);
+ goto cleanup;
+ }
+
while (strbuf_getline(&input, stdin) != EOF) {
if (data.split_on_whitespace) {
/*
@@ -613,6 +751,7 @@ static int batch_objects(struct batch_options *opt)
batch_one_object(input.buf, &output, opt, &data);
}
+ cleanup:
strbuf_release(&input);
strbuf_release(&output);
warn_on_object_refname_ambiguity = save_warning;
@@ -645,6 +784,8 @@ static int batch_option_callback(const struct option *opt,
bo->batch_mode = BATCH_MODE_CONTENTS;
else if (!strcmp(opt->long_name, "batch-check"))
bo->batch_mode = BATCH_MODE_INFO;
+ else if (!strcmp(opt->long_name, "batch-command"))
+ bo->batch_mode = BATCH_MODE_QUEUE_AND_DISPATCH;
else
BUG("%s given to batch-option-callback", opt->long_name);
@@ -666,7 +807,7 @@ int cmd_cat_file(int argc, const char **argv, const char *prefix)
N_("git cat-file <type> <object>"),
N_("git cat-file (-e | -p) <object>"),
N_("git cat-file (-t | -s) [--allow-unknown-type] <object>"),
- N_("git cat-file (--batch | --batch-check) [--batch-all-objects]\n"
+ N_("git cat-file (--batch | --batch-check | --batch-command) [--batch-all-objects]\n"
" [--buffer] [--follow-symlinks] [--unordered]\n"
" [--textconv | --filters]"),
N_("git cat-file (--textconv | --filters)\n"
@@ -695,6 +836,10 @@ int cmd_cat_file(int argc, const char **argv, const char *prefix)
N_("like --batch, but don't emit <contents>"),
PARSE_OPT_OPTARG | PARSE_OPT_NONEG,
batch_option_callback),
+ OPT_CALLBACK_F(0, "batch-command", &batch, N_("format"),
+ N_("read commands from stdin"),
+ PARSE_OPT_OPTARG | PARSE_OPT_NONEG,
+ batch_option_callback),
OPT_CMDMODE(0, "batch-all-objects", &opt,
N_("with --batch[-check]: ignores stdin, batches all known objects"), 'b'),
/* Batch-specific options */
diff --git a/t/README b/t/README
index f48e0542cdc..bcd813b0c59 100644
--- a/t/README
+++ b/t/README
@@ -472,6 +472,9 @@ a test and then fails then the whole test run will abort. This can help to make
sure the expected tests are executed and not silently skipped when their
dependency breaks or is simply not present in a new environment.
+GIT_TEST_CAT_FILE_NO_FLUSH_ON_EXIT=<boolean>, when true will prevent cat-file
+--batch-command from flushing to output on exit.
I don't think you need to document this here. Looking at the other
variables this is a list of things one can set to change the behavior of
the tests when they are run. GIT_TEST_CAT_FILE_NO_FLUSH is not in that
category - we don't want anyone setting it when they run the tests, it's
just an implementation detail.
+
Naming Tests
------------
diff --git a/t/t1006-cat-file.sh b/t/t1006-cat-file.sh
index 2d52851dadc..74f0e36b69e 100755
--- a/t/t1006-cat-file.sh
+++ b/t/t1006-cat-file.sh
@@ -182,6 +182,24 @@ $content"
test_cmp expect actual
'
+ for opt in --buffer --no-buffer
+ do
+ test -z "$content" ||
+ test_expect_success "--batch-command $opt output of $type content is correct" '
+ maybe_remove_timestamp "$batch_output" $no_ts >expect &&
+ maybe_remove_timestamp "$(test_write_lines "contents $sha1" \
+ | git cat-file --batch-command $opt)" $no_ts >actual &&
+ test_cmp expect actual
+ '
+
+ test_expect_success "--batch-command $opt output of $type info is correct" '
+ echo "$sha1 $type $size" >expect &&
+ test_write_lines "info $sha1" \
+ | git cat-file --batch-command $opt >actual &&
+ test_cmp expect actual
+ '
+ done
+
test_expect_success "custom --batch-check format" '
echo "$type $sha1" >expect &&
echo $sha1 | git cat-file --batch-check="%(objecttype) %(objectname)" >actual &&
@@ -229,6 +247,22 @@ test_expect_success "setup" '
run_tests 'blob' $hello_sha1 $hello_size "$hello_content" "$hello_content"
+test_expect_success '--batch-command --buffer with flush for blob info' '
+ echo "$hello_sha1 blob $hello_size" >expect &&
+ test_write_lines "info $hello_sha1" "flush" | \
You don't need a '\' after a '|', however it might be better to use the
style from the tests above where the '|' is on the beginning of the next
line.
+ GIT_TEST_CAT_FILE_NO_FLUSH_ON_EXIT=1 \
+ git cat-file --batch-command --buffer >actual &&
+ test_cmp expect actual
+'
+
+test_expect_success '--batch-command --buffer without flush for blob info' '
+ touch output &&
+ test_write_lines "info $hello_sha1" | \
+ GIT_TEST_CAT_FILE_NO_FLUSH_ON_EXIT=1 \
+ git cat-file --batch-command --buffer >>output &&
+ test_must_be_empty output
+'
+
test_expect_success '--batch-check without %(rest) considers whole line' '
echo "$hello_sha1 blob $hello_size" >expect &&
git update-index --add --cacheinfo 100644 $hello_sha1 "white space" &&
@@ -272,7 +306,7 @@ test_expect_success \
"Reach a blob from a tag pointing to it" \
"test '$hello_content' = \"\$(git cat-file blob $tag_sha1)\""
-for batch in batch batch-check
+for batch in batch batch-check batch-command
do
for opt in t s e p
do
@@ -378,6 +412,42 @@ test_expect_success "--batch-check with multiple sha1s gives correct format" '
"$(echo_without_newline "$batch_check_input" | git cat-file --batch-check)"
'
+test_expect_success '--batch-command with multiple info calls gives correct format' '
+ cat >expect <<-EOF &&
+ $hello_sha1 blob $hello_size
+ $tree_sha1 tree $tree_size
+ $commit_sha1 commit $commit_size
+ $tag_sha1 tag $tag_size
+ deadbeef missing
+ EOF
+
+ test_write_lines "info $hello_sha1"\
+ "info $tree_sha1"\
+ "info $commit_sha1"\
+ "info $tag_sha1"\
+ "info deadbeef" | git cat-file --batch-command --buffer >actual &&
This is quite noisy with all the " and \, using a here document instead
would match our usual style.
+ test_cmp expect actual
+'
+
+test_expect_success '--batch-command with multiple command calls gives correct format' '
+ remove_timestamp >expect <<-EOF &&
+ $hello_sha1 blob $hello_size
+ $hello_content
+ $commit_sha1 commit $commit_size
+ $commit_content
+ $tag_sha1 tag $tag_size
+ $tag_content
+ deadbeef missing
+ EOF
+
+ test_write_lines "contents $hello_sha1"\
+ "contents $commit_sha1"\
+ "contents $tag_sha1"\
+ "contents deadbeef"\
+ "flush" | git cat-file --batch-command --buffer | remove_timestamp >actual &&
This loses the exit code of the command we're trying to test, it would
be better to have
git cat-file ... >actual-raw &&
remove_timestamp <actual-raw >actual
+ test_cmp expect actual
+'
+
test_expect_success 'setup blobs which are likely to delta' '
test-tool genrandom foo 10240 >foo &&
{ cat foo && echo plus; } >foo-plus &&
@@ -968,5 +1038,40 @@ test_expect_success 'cat-file --batch-all-objects --batch-check ignores replace'
echo "$orig commit $orig_size" >expect &&
test_cmp expect actual
'
+test_expect_success 'batch-command empty command' '
+ echo "" >cmd &&
+ test_expect_code 128 git cat-file --batch-command <cmd 2>err &&
+ grep "^fatal:.*empty command in input.*" err
+'
+
+test_expect_success 'batch-command whitespace before command' '
+ echo " info deadbeef" >cmd &&
+ test_expect_code 128 git cat-file --batch-command <cmd 2>err &&
+ grep "^fatal:.*whitespace before command.*" err
+'
+
+test_expect_success 'batch-command unknown command' '
+ echo unknown_command >cmd &&
+ test_expect_code 128 git cat-file --batch-command <cmd 2>err &&
+ grep "^fatal:.*unknown command.*" err
+'
+
+test_expect_success 'batch-command missing arguments' '
+ echo "info" >cmd &&
+ test_expect_code 128 git cat-file --batch-command <cmd 2>err &&
+ grep "^fatal:.*info requires arguments.*" err
+'
+
+test_expect_success 'batch-command flush with arguments' '
+ echo "flush arg" >cmd &&
+ test_expect_code 128 git cat-file --batch-command --buffer <cmd 2>err &&
+ grep "^fatal:.*flush takes no arguments.*" err
+'
+
+test_expect_success 'batch-command flush without --buffer' '
+ echo "flush" >cmd &&
+ test_expect_code 128 git cat-file --batch-command <cmd 2>err &&
+ grep "^fatal:.*flush is only for --buffer mode.*" err
+'
test_done
