In a previous commit, we replaced test_cmp invocations with
verify_fetch_result(). Finish the process of removing test_cmp by using
grep in verify_fetch_result() instead.
This makes the tests less sensitive to changes because, instead of
checking the whole stderr, we only grep for the lines of the form
* "<old-head>..<new-head>\s+branch\s+-> origin/branch"
* "Fetching submodule <submodule-path>" (if fetching a submodule)
when we expect the repo to have fetched. If we expect the repo to not
have fetched, grep to make sure the lines are absent. Also, simplify the
assertions by using grep patterns that match only the relevant pieces of
information, e.g. <old-head> is irrelevant because we only want to know
if the fetch was performed, so we don't need to know where the branch
was before the fetch.
Signed-off-by: Glen Choo <chooglen@xxxxxxxxxx>
---
t/t5526-fetch-submodules.sh | 131 +++++++++++++-----------------------
1 file changed, 48 insertions(+), 83 deletions(-)
diff --git a/t/t5526-fetch-submodules.sh b/t/t5526-fetch-submodules.sh
index 0e93df1665..cb18f0ac21 100755
--- a/t/t5526-fetch-submodules.sh
+++ b/t/t5526-fetch-submodules.sh
@@ -20,49 +20,52 @@ pwd=$(pwd)
add_upstream_commit() {
(
cd submodule &&
- head1=$(git rev-parse --short HEAD) &&
echo new >> subfile &&
test_tick &&
git add subfile &&
git commit -m new subfile &&
- head2=$(git rev-parse --short HEAD) &&
- echo "Fetching submodule submodule" > ../expect.err.sub &&
- echo "From $pwd/submodule" >> ../expect.err.sub &&
- echo " $head1..$head2 sub -> origin/sub" >> ../expect.err.sub
+ git rev-parse --short HEAD >../subhead
) &&
(
cd deepsubmodule &&
- head1=$(git rev-parse --short HEAD) &&
echo new >> deepsubfile &&
test_tick &&
git add deepsubfile &&
git commit -m new deepsubfile &&
- head2=$(git rev-parse --short HEAD) &&
- echo "Fetching submodule submodule/subdir/deepsubmodule" > ../expect.err.deep
- echo "From $pwd/deepsubmodule" >> ../expect.err.deep &&
- echo " $head1..$head2 deep -> origin/deep" >> ../expect.err.deep
+ git rev-parse --short HEAD >../deephead
)
}
# Verifies that the expected repositories were fetched. This is done by
-# concatenating the files expect.err.[super|sub|deep] in the correct
-# order and comparing it to the actual stderr.
+# checking that the branches of [super|sub|deep] were updated to
+# [super|sub|deep]head if the corresponding file exists.
#
-# If a repo should not be fetched in the test, its corresponding
-# expect.err file should be rm-ed.
+# If the [super|sub|deep] head file does not exist, this verifies that
+# the corresponding repo was not fetched. Thus, if a repo should not be
+# fetched in the test, its corresponding head file should be
+# rm-ed.
verify_fetch_result() {
ACTUAL_ERR=$1 &&
- rm -f expect.err.combined &&
- if [ -f expect.err.super ]; then
- cat expect.err.super >>expect.err.combined
+ # Each grep pattern is guaranteed to match the correct repo
+ # because each repo uses a different name for their branch i.e.
+ # "super", "sub" and "deep".
+ if [ -f superhead ]; then
+ grep -E "\.\.$(cat superhead)\s+super\s+-> origin/super" $ACTUAL_ERR
+ else
+ ! grep "super" $ACTUAL_ERR
fi &&
- if [ -f expect.err.sub ]; then
- cat expect.err.sub >>expect.err.combined
+ if [ -f subhead ]; then
+ grep "Fetching submodule submodule" $ACTUAL_ERR &&
+ grep -E "\.\.$(cat subhead)\s+sub\s+-> origin/sub" $ACTUAL_ERR
+ else
+ ! grep "Fetching submodule submodule" $ACTUAL_ERR
fi &&
- if [ -f expect.err.deep ]; then
- cat expect.err.deep >>expect.err.combined
- fi &&
- test_cmp expect.err.combined $ACTUAL_ERR
+ if [ -f deephead ]; then
+ grep "Fetching submodule submodule/subdir/deepsubmodule" $ACTUAL_ERR &&
+ grep -E "\.\.$(cat deephead)\s+deep\s+-> origin/deep" $ACTUAL_ERR
+ else
+ ! grep "Fetching submodule submodule/subdir/deepsubmodule" $ACTUAL_ERR
+ fi
}
test_expect_success setup '
@@ -274,13 +277,10 @@ test_expect_success "Recursion doesn't happen when no new commits are fetched in
'
test_expect_success "Recursion stops when no new submodule commits are fetched" '
- head1=$(git rev-parse --short HEAD) &&
git add submodule &&
git commit -m "new submodule" &&
- head2=$(git rev-parse --short HEAD) &&
- echo "From $pwd/." > expect.err.super &&
- echo " $head1..$head2 super -> origin/super" >>expect.err.super &&
- rm expect.err.deep &&
+ git rev-parse --short HEAD >superhead &&
+ rm deephead &&
(
cd downstream &&
git fetch >../actual.out 2>../actual.err
@@ -291,15 +291,12 @@ test_expect_success "Recursion stops when no new submodule commits are fetched"
test_expect_success "Recursion doesn't happen when new superproject commits don't change any submodules" '
add_upstream_commit &&
- head1=$(git rev-parse --short HEAD) &&
echo a > file &&
git add file &&
git commit -m "new file" &&
- head2=$(git rev-parse --short HEAD) &&
- echo "From $pwd/." > expect.err.super &&
- echo " $head1..$head2 super -> origin/super" >> expect.err.super &&
- rm expect.err.sub &&
- rm expect.err.deep &&
+ git rev-parse --short HEAD >superhead &&
+ rm subhead &&
+ rm deephead &&
(
cd downstream &&
git fetch >../actual.out 2>../actual.err
@@ -318,12 +315,9 @@ test_expect_success "Recursion picks up config in submodule" '
)
) &&
add_upstream_commit &&
- head1=$(git rev-parse --short HEAD) &&
git add submodule &&
git commit -m "new submodule" &&
- head2=$(git rev-parse --short HEAD) &&
- echo "From $pwd/." > expect.err.super &&
- echo " $head1..$head2 super -> origin/super" >> expect.err.super &&
+ git rev-parse --short HEAD >superhead &&
(
cd downstream &&
git fetch >../actual.out 2>../actual.err &&
@@ -345,20 +339,13 @@ test_expect_success "Recursion picks up all submodules when necessary" '
git fetch &&
git checkout -q FETCH_HEAD
) &&
- head1=$(git rev-parse --short HEAD^) &&
git add subdir/deepsubmodule &&
git commit -m "new deepsubmodule" &&
- head2=$(git rev-parse --short HEAD) &&
- echo "Fetching submodule submodule" > ../expect.err.sub &&
- echo "From $pwd/submodule" >> ../expect.err.sub &&
- echo " $head1..$head2 sub -> origin/sub" >> ../expect.err.sub
+ git rev-parse --short HEAD >../subhead
) &&
- head1=$(git rev-parse --short HEAD) &&
git add submodule &&
git commit -m "new submodule" &&
- head2=$(git rev-parse --short HEAD) &&
- echo "From $pwd/." > expect.err.super &&
- echo " $head1..$head2 super -> origin/super" >> expect.err.super &&
+ git rev-parse --short HEAD >superhead &&
(
cd downstream &&
git fetch >../actual.out 2>../actual.err
@@ -376,13 +363,9 @@ test_expect_success "'--recurse-submodules=on-demand' doesn't recurse when no ne
git fetch &&
git checkout -q FETCH_HEAD
) &&
- head1=$(git rev-parse --short HEAD^) &&
git add subdir/deepsubmodule &&
git commit -m "new deepsubmodule" &&
- head2=$(git rev-parse --short HEAD) &&
- echo Fetching submodule submodule > ../expect.err.sub &&
- echo "From $pwd/submodule" >> ../expect.err.sub &&
- echo " $head1..$head2 sub -> origin/sub" >> ../expect.err.sub
+ git rev-parse --short HEAD >../subhead
) &&
(
cd downstream &&
@@ -395,12 +378,9 @@ test_expect_success "'--recurse-submodules=on-demand' doesn't recurse when no ne
'
test_expect_success "'--recurse-submodules=on-demand' recurses as deep as necessary (and ignores config)" '
- head1=$(git rev-parse --short HEAD) &&
git add submodule &&
git commit -m "new submodule" &&
- head2=$(git rev-parse --short HEAD) &&
- echo "From $pwd/." > expect.err.super &&
- echo " $head1..$head2 super -> origin/super" >>expect.err.super &&
+ git rev-parse --short HEAD >superhead &&
(
cd downstream &&
git config fetch.recurseSubmodules false &&
@@ -421,15 +401,12 @@ test_expect_success "'--recurse-submodules=on-demand' recurses as deep as necess
test_expect_success "'--recurse-submodules=on-demand' stops when no new submodule commits are found in the superproject (and ignores config)" '
add_upstream_commit &&
- head1=$(git rev-parse --short HEAD) &&
echo a >> file &&
git add file &&
git commit -m "new file" &&
- head2=$(git rev-parse --short HEAD) &&
- echo "From $pwd/." > expect.err.super &&
- echo " $head1..$head2 super -> origin/super" >> expect.err.super &&
- rm expect.err.sub &&
- rm expect.err.deep &&
+ git rev-parse --short HEAD >superhead &&
+ rm subhead &&
+ rm deephead &&
(
cd downstream &&
git fetch --recurse-submodules=on-demand >../actual.out 2>../actual.err
@@ -445,13 +422,10 @@ test_expect_success "'fetch.recurseSubmodules=on-demand' overrides global config
) &&
add_upstream_commit &&
git config --global fetch.recurseSubmodules false &&
- head1=$(git rev-parse --short HEAD) &&
git add submodule &&
git commit -m "new submodule" &&
- head2=$(git rev-parse --short HEAD) &&
- echo "From $pwd/." > expect.err.super &&
- echo " $head1..$head2 super -> origin/super" >>expect.err.super &&
- rm expect.err.deep &&
+ git rev-parse --short HEAD >superhead &&
+ rm deephead &&
(
cd downstream &&
git config fetch.recurseSubmodules on-demand &&
@@ -473,13 +447,10 @@ test_expect_success "'submodule.<sub>.fetchRecurseSubmodules=on-demand' override
) &&
add_upstream_commit &&
git config fetch.recurseSubmodules false &&
- head1=$(git rev-parse --short HEAD) &&
git add submodule &&
git commit -m "new submodule" &&
- head2=$(git rev-parse --short HEAD) &&
- echo "From $pwd/." > expect.err.super &&
- echo " $head1..$head2 super -> origin/super" >>expect.err.super &&
- rm expect.err.deep &&
+ git rev-parse --short HEAD >superhead &&
+ rm deephead &&
(
cd downstream &&
git config submodule.submodule.fetchRecurseSubmodules on-demand &&
@@ -499,15 +470,12 @@ test_expect_success "don't fetch submodule when newly recorded commits are alrea
cd submodule &&
git checkout -q HEAD^^
) &&
- head1=$(git rev-parse --short HEAD) &&
git add submodule &&
git commit -m "submodule rewound" &&
- head2=$(git rev-parse --short HEAD) &&
- echo "From $pwd/." > expect.err.super &&
- echo " $head1..$head2 super -> origin/super" >> expect.err.super &&
- rm expect.err.sub &&
+ git rev-parse --short HEAD >superhead &&
+ rm subhead &&
# This file does not exist, but rm -f for readability
- rm -f expect.err.deep &&
+ rm -f deephead &&
(
cd downstream &&
git fetch >../actual.out 2>../actual.err
@@ -526,14 +494,11 @@ test_expect_success "'fetch.recurseSubmodules=on-demand' works also without .git
git fetch --recurse-submodules
) &&
add_upstream_commit &&
- head1=$(git rev-parse --short HEAD) &&
git add submodule &&
git rm .gitmodules &&
git commit -m "new submodule without .gitmodules" &&
- head2=$(git rev-parse --short HEAD) &&
- echo "From $pwd/." >expect.err.super &&
- echo " $head1..$head2 super -> origin/super" >>expect.err.super &&
- rm expect.err.deep &&
+ git rev-parse --short HEAD >superhead &&
+ rm deephead &&
(
cd downstream &&
rm .gitmodules &&
--
2.33.GIT
