[PATCH v3 1/2] t1510: remove need for "test_untraceable", retain coverage

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Amend the tests checking whether stderr is empty added in
4868b2ea17b (Subject: setup: officially support --work-tree without
--git-dir, 2011-01-19) work portably on all POSIX shells, instead
suppressing the trace output with "test_untraceable" on shells that
aren't bash.

The tests that used the "try_repo" helper wanted to check whether git
commands invoked therein would emit anything on stderr. To do this
they invoked the function and redirected the stderr to a "message"
file.

In 58275069288 (t1510-repo-setup: mark as untraceable with '-x',
2018-02-24) these were made to use "test_untraceable" introduced in
5fc98e79fc0 (t: add means to disable '-x' tracing for individual test
scripts, 2018-02-24).

It is better to have the "try_repo" function itself start with a
"test_when_finished 'rm stderr'", and then redirect the stderr output
from git commands it invokes via its helpers to a "stderr" file.

This means that if we have a failure it'll be closer to the source of
the problem, and most importantly isn't incompatible with "-x" on
shells that aren't "bash".

We also need to split those tests that had two "try_repo" invocations
into different tests, which'll further help to narrow down any
potential failures. This wasn't strictly necessary (an artifact of the
use of "test_when_finished"), but the pattern enforces better test
hygiene.

The functions it calls might change directories, so we pass an
absolute "$stderr_log_path" around. We also need to change a "$(pwd)"
to "$PWD" in test_repo(), on e.g. "dash" that interpolation will be
traced and part of the "2>>" redirection.

1. https://lore.kernel.org/git/YbMiK1wHzBfYvK2a@xxxxxxxxxxxxxxxxxxxxxxx/

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@xxxxxxxxx>
---
 t/t1510-repo-setup.sh | 85 +++++++++++++++++++++----------------------
 1 file changed, 42 insertions(+), 43 deletions(-)

diff --git a/t/t1510-repo-setup.sh b/t/t1510-repo-setup.sh
index 591505a39c0..fc94d8b49be 100755
--- a/t/t1510-repo-setup.sh
+++ b/t/t1510-repo-setup.sh
@@ -40,9 +40,6 @@ A few rules for repo setup:
     prefix is NULL.
 "
 
-# This test heavily relies on the standard error of nested function calls.
-test_untraceable=UnfortunatelyYes
-
 TEST_PASSES_SANITIZE_LEAK=true
 . ./test-lib.sh
 
@@ -62,7 +59,7 @@ test_repo () {
 			export GIT_WORK_TREE
 		fi &&
 		rm -f trace &&
-		GIT_TRACE_SETUP="$(pwd)/trace" git symbolic-ref HEAD >/dev/null &&
+		GIT_TRACE_SETUP="$PWD/trace" git symbolic-ref HEAD >/dev/null 2>>"$stderr_log_path" &&
 		grep '^setup: ' trace >result &&
 		test_cmp expected result
 	)
@@ -72,7 +69,7 @@ maybe_config () {
 	file=$1 var=$2 value=$3 &&
 	if test "$value" != unset
 	then
-		git config --file="$file" "$var" "$value"
+		git config --file="$file" "$var" "$value" 2>>"$stderr_log_path"
 	fi
 }
 
@@ -80,7 +77,7 @@ setup_repo () {
 	name=$1 worktreecfg=$2 gitfile=$3 barecfg=$4 &&
 	sane_unset GIT_DIR GIT_WORK_TREE &&
 
-	git -c init.defaultBranch=initial init "$name" &&
+	git -c init.defaultBranch=initial init "$name" 2>>"$stderr_log_path" &&
 	maybe_config "$name/.git/config" core.worktree "$worktreecfg" &&
 	maybe_config "$name/.git/config" core.bare "$barecfg" &&
 	mkdir -p "$name/sub/sub" &&
@@ -210,10 +207,14 @@ run_wt_tests () {
 #	(git dir) (work tree) (cwd) (prefix)	<-- from subdir
 try_repo () {
 	name=$1 worktreeenv=$2 gitdirenv=$3 &&
+	stderr_log_path="$PWD/stderr" &&
+
+	test_when_finished "rm \"$stderr_log_path\"" &&
 	setup_repo "$name" "$4" "$5" "$6" &&
 	shift 6 &&
 	try_case "$name" "$worktreeenv" "$gitdirenv" \
 		"$1" "$2" "$3" "$4" &&
+	test_must_be_empty "$stderr_log_path" &&
 	shift 4 &&
 	case "$gitdirenv" in
 	/* | ?:/* | unset) ;;
@@ -221,7 +222,8 @@ try_repo () {
 		gitdirenv=../$gitdirenv ;;
 	esac &&
 	try_case "$name/sub" "$worktreeenv" "$gitdirenv" \
-		"$1" "$2" "$3" "$4"
+		"$1" "$2" "$3" "$4" &&
+	test_must_be_empty "$stderr_log_path"
 }
 
 # Bit 0 = GIT_WORK_TREE
@@ -234,15 +236,13 @@ try_repo () {
 test_expect_success '#0: nonbare repo, no explicit configuration' '
 	try_repo 0 unset unset unset "" unset \
 		.git "$here/0" "$here/0" "(null)" \
-		.git "$here/0" "$here/0" sub/ 2>message &&
-	test_must_be_empty message
+		.git "$here/0" "$here/0" sub/
 '
 
 test_expect_success '#1: GIT_WORK_TREE without explicit GIT_DIR is accepted' '
 	try_repo 1 "$here" unset unset "" unset \
 		"$here/1/.git" "$here" "$here" 1/ \
-		"$here/1/.git" "$here" "$here" 1/sub/ 2>message &&
-	test_must_be_empty message
+		"$here/1/.git" "$here" "$here" 1/sub/
 '
 
 test_expect_success '#2: worktree defaults to cwd with explicit GIT_DIR' '
@@ -268,19 +268,20 @@ test_expect_success '#4: core.worktree without GIT_DIR set is accepted' '
 	mkdir -p 4/sub sub &&
 	try_case 4 unset unset \
 		.git "$here/4/sub" "$here/4" "(null)" \
-		"$here/4/.git" "$here/4/sub" "$here/4/sub" "(null)" 2>message &&
-	test_must_be_empty message
+		"$here/4/.git" "$here/4/sub" "$here/4/sub" "(null)"
 '
 
-test_expect_success '#5: core.worktree + GIT_WORK_TREE is accepted' '
+test_expect_success '#5.1: core.worktree + GIT_WORK_TREE is accepted' '
 	# or: you cannot intimidate away the lack of GIT_DIR setting
 	try_repo 5 "$here" unset "$here/5" "" unset \
 		"$here/5/.git" "$here" "$here" 5/ \
-		"$here/5/.git" "$here" "$here" 5/sub/ 2>message &&
+		"$here/5/.git" "$here" "$here" 5/sub/
+'
+
+test_expect_success '#5.2: core.worktree + GIT_WORK_TREE is accepted' '
 	try_repo 5a .. unset "$here/5a" "" unset \
 		"$here/5a/.git" "$here" "$here" 5a/ \
-		"$here/5a/.git" "$here/5a" "$here/5a" sub/ &&
-	test_must_be_empty message
+		"$here/5a/.git" "$here/5a" "$here/5a" sub/
 '
 
 test_expect_success '#6: setting GIT_DIR brings core.worktree to life' '
@@ -376,8 +377,7 @@ test_expect_success '#9: GIT_WORK_TREE accepted with gitfile' '
 	mkdir -p 9/wt &&
 	try_repo 9 wt unset unset gitfile unset \
 		"$here/9.git" "$here/9/wt" "$here/9" "(null)" \
-		"$here/9.git" "$here/9/sub/wt" "$here/9/sub" "(null)" 2>message &&
-	test_must_be_empty message
+		"$here/9.git" "$here/9/sub/wt" "$here/9/sub" "(null)"
 '
 
 test_expect_success '#10: GIT_DIR can point to gitfile' '
@@ -402,16 +402,14 @@ run_wt_tests 11 gitfile
 test_expect_success '#12: core.worktree with gitfile is accepted' '
 	try_repo 12 unset unset "$here/12" gitfile unset \
 		"$here/12.git" "$here/12" "$here/12" "(null)" \
-		"$here/12.git" "$here/12" "$here/12" sub/ 2>message &&
-	test_must_be_empty message
+		"$here/12.git" "$here/12" "$here/12" sub/
 '
 
 test_expect_success '#13: core.worktree+GIT_WORK_TREE accepted (with gitfile)' '
 	# or: you cannot intimidate away the lack of GIT_DIR setting
 	try_repo 13 non-existent-too unset non-existent gitfile unset \
 		"$here/13.git" "$here/13/non-existent-too" "$here/13" "(null)" \
-		"$here/13.git" "$here/13/sub/non-existent-too" "$here/13/sub" "(null)" 2>message &&
-	test_must_be_empty message
+		"$here/13.git" "$here/13/sub/non-existent-too" "$here/13/sub" "(null)"
 '
 
 # case #14.
@@ -549,8 +547,7 @@ test_expect_success '#17: GIT_WORK_TREE without explicit GIT_DIR is accepted (ba
 	mkdir -p 17b/.git/wt/sub &&
 
 	try_case 17a/.git "$here/17a" unset \
-		"$here/17a/.git" "$here/17a" "$here/17a" .git/ \
-		2>message &&
+		"$here/17a/.git" "$here/17a" "$here/17a" .git/ &&
 	try_case 17a/.git/wt "$here/17a" unset \
 		"$here/17a/.git" "$here/17a" "$here/17a" .git/wt/ &&
 	try_case 17a/.git/wt/sub "$here/17a" unset \
@@ -565,14 +562,16 @@ test_expect_success '#17: GIT_WORK_TREE without explicit GIT_DIR is accepted (ba
 
 	try_repo 17c "$here/17c" unset unset "" true \
 		.git "$here/17c" "$here/17c" "(null)" \
-		"$here/17c/.git" "$here/17c" "$here/17c" sub/ 2>message &&
-	test_must_be_empty message
+		"$here/17c/.git" "$here/17c" "$here/17c" sub/
 '
 
-test_expect_success '#18: bare .git named by GIT_DIR has no worktree' '
+test_expect_success '#18.1: bare .git named by GIT_DIR has no worktree' '
 	try_repo 18 unset .git unset "" true \
 		.git "(null)" "$here/18" "(null)" \
-		../.git "(null)" "$here/18/sub" "(null)" &&
+		../.git "(null)" "$here/18/sub" "(null)"
+'
+
+test_expect_success '#18.2: bare .git named by GIT_DIR has no worktree' '
 	try_repo 18b unset "$here/18b/.git" unset "" true \
 		"$here/18b/.git" "(null)" "$here/18b" "(null)" \
 		"$here/18b/.git" "(null)" "$here/18b/sub" "(null)"
@@ -590,12 +589,11 @@ test_expect_success '#20a: core.worktree without GIT_DIR accepted (inside .git)'
 	setup_repo 20a "$here/20a" "" unset &&
 	mkdir -p 20a/.git/wt/sub &&
 	try_case 20a/.git unset unset \
-		"$here/20a/.git" "$here/20a" "$here/20a" .git/ 2>message &&
+		"$here/20a/.git" "$here/20a" "$here/20a" .git/ &&
 	try_case 20a/.git/wt unset unset \
 		"$here/20a/.git" "$here/20a" "$here/20a" .git/wt/ &&
 	try_case 20a/.git/wt/sub unset unset \
-		"$here/20a/.git" "$here/20a" "$here/20a" .git/wt/sub/ &&
-	test_must_be_empty message
+		"$here/20a/.git" "$here/20a" "$here/20a" .git/wt/sub/
 '
 
 test_expect_success '#20b/c: core.worktree and core.bare conflict' '
@@ -625,10 +623,9 @@ test_expect_success '#21: setup, core.worktree warns before overriding core.bare
 		cd 21/.git &&
 		GIT_WORK_TREE="$here/21" &&
 		export GIT_WORK_TREE &&
-		git status >/dev/null
-	) 2>message &&
-	test_must_be_empty message
-
+		git status 2>message &&
+		test_must_be_empty message
+	)
 '
 run_wt_tests 21
 
@@ -742,14 +739,16 @@ test_expect_success '#24: bare repo has no worktree (gitfile case)' '
 test_expect_success '#25: GIT_WORK_TREE accepted if GIT_DIR unset (bare gitfile case)' '
 	try_repo 25 "$here/25" unset unset gitfile true \
 		"$here/25.git" "$here/25" "$here/25" "(null)"  \
-		"$here/25.git" "$here/25" "$here/25" "sub/" 2>message &&
-	test_must_be_empty message
+		"$here/25.git" "$here/25" "$here/25" "sub/"
 '
 
-test_expect_success '#26: bare repo has no worktree (GIT_DIR -> gitfile case)' '
+test_expect_success '#26.1: bare repo has no worktree (GIT_DIR -> gitfile case)' '
 	try_repo 26 unset "$here/26/.git" unset gitfile true \
 		"$here/26.git" "(null)" "$here/26" "(null)" \
-		"$here/26.git" "(null)" "$here/26/sub" "(null)" &&
+		"$here/26.git" "(null)" "$here/26/sub" "(null)"
+'
+
+test_expect_success '#26.2: bare repo has no worktree (GIT_DIR -> gitfile case)' '
 	try_repo 26b unset .git unset gitfile true \
 		"$here/26b.git" "(null)" "$here/26b" "(null)" \
 		"$here/26b.git" "(null)" "$here/26b/sub" "(null)"
@@ -779,9 +778,9 @@ test_expect_success '#29: setup' '
 		cd 29 &&
 		GIT_WORK_TREE="$here/29" &&
 		export GIT_WORK_TREE &&
-		git status
-	) 2>message &&
-	test_must_be_empty message
+		git status 2>message &&
+		test_must_be_empty message
+	)
 '
 run_wt_tests 29 gitfile
 
-- 
2.34.1.932.g36842105b61




[Index of Archives]     [Linux Kernel Development]     [Gcc Help]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [V4L]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]     [Fedora Users]

  Powered by Linux