In the preceding commit the use of "test_untraceable=UnfortunatelyYes"
was removed from "t1510-repo-setup.sh" in favor of more narrow
redirections of the output of specific commands (and not entire
sub-shells or functions).
This is in line with the fixes in the series that introduced the
"test_untraceable" facility. See 571e472dc43 (Merge branch
'sg/test-x', 2018-03-14) for the series as a whole, and
e.g. 91538d0cde9 (t5570-git-daemon: don't check the stderr of a
subshell, 2018-02-24) for a commit that's in line with the changes in
the preceding commit.
We've thus solved the TODO item noted when "test_untraceable" was
added to "t1510-repo-setup.sh" in 58275069288 (t1510-repo-setup: mark
as untraceable with '-x', 2018-02-24).
So let's remove the feature entirely. Not only is it currently unused,
but it actively encourages an anti-pattern in our tests. We should be
testing the output of specific commands, not entire subshells or
functions.
That the "-x" output had to be disabled as a result is only one
symptom, but even under bash those tests will be harder to debug as
the subsequent check of the redirected file will be far removed from
the command that emitted the output.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@xxxxxxxxx>
---
t/README | 3 ---
t/test-lib.sh | 66 ++++++---------------------------------------------
2 files changed, 7 insertions(+), 62 deletions(-)
diff --git a/t/README b/t/README
index 29f72354bf1..3d30bbff34a 100644
--- a/t/README
+++ b/t/README
@@ -86,9 +86,6 @@ appropriately before running "make". Short options can be bundled, i.e.
-x::
Turn on shell tracing (i.e., `set -x`) during the tests
themselves. Implies `--verbose`.
- Ignored in test scripts that set the variable 'test_untraceable'
- to a non-empty value, unless it's run with a Bash version
- supporting BASH_XTRACEFD, i.e. v4.1 or later.
-d::
--debug::
diff --git a/t/test-lib.sh b/t/test-lib.sh
index 57efcc5e97a..b008716917b 100644
--- a/t/test-lib.sh
+++ b/t/test-lib.sh
@@ -381,29 +381,6 @@ then
exit
fi
-if test -n "$trace" && test -n "$test_untraceable"
-then
- # '-x' tracing requested, but this test script can't be reliably
- # traced, unless it is run with a Bash version supporting
- # BASH_XTRACEFD (introduced in Bash v4.1).
- #
- # Perform this version check _after_ the test script was
- # potentially re-executed with $TEST_SHELL_PATH for '--tee' or
- # '--verbose-log', so the right shell is checked and the
- # warning is issued only once.
- if test -n "$BASH_VERSION" && eval '
- test ${BASH_VERSINFO[0]} -gt 4 || {
- test ${BASH_VERSINFO[0]} -eq 4 &&
- test ${BASH_VERSINFO[1]} -ge 1
- }
- '
- then
- : Executed by a Bash version supporting BASH_XTRACEFD. Good.
- else
- echo >&2 "warning: ignoring -x; '$0' is untraceable without BASH_XTRACEFD"
- trace=
- fi
-fi
if test -n "$trace" && test -z "$verbose_log"
then
verbose=t
@@ -650,19 +627,6 @@ else
exec 4>/dev/null 3>/dev/null
fi
-# Send any "-x" output directly to stderr to avoid polluting tests
-# which capture stderr. We can do this unconditionally since it
-# has no effect if tracing isn't turned on.
-#
-# Note that this sets up the trace fd as soon as we assign the variable, so it
-# must come after the creation of descriptor 4 above. Likewise, we must never
-# unset this, as it has the side effect of closing descriptor 4, which we
-# use to show verbose tests to the user.
-#
-# Note also that we don't need or want to export it. The tracing is local to
-# this shell, and we would not want to influence any shells we exec.
-BASH_XTRACEFD=4
-
test_failure=0
test_count=0
test_fixed=0
@@ -949,36 +913,20 @@ test_eval_ () {
# the shell from printing the "set +x" to turn it off (nor the saving
# of $? before that). But we can make sure that the output goes to
# /dev/null.
- #
- # There are a few subtleties here:
- #
- # - we have to redirect descriptor 4 in addition to 2, to cover
- # BASH_XTRACEFD
- #
- # - the actual eval has to come before the redirection block (since
- # it needs to see descriptor 4 to set up its stderr)
- #
- # - likewise, any error message we print must be outside the block to
- # access descriptor 4
- #
- # - checking $? has to come immediately after the eval, but it must
- # be _inside_ the block to avoid polluting the "set -x" output
- #
-
- test_eval_inner_ "$@" </dev/null >&3 2>&4
{
+ test_eval_inner_ "$@" </dev/null >&3 2>&4
test_eval_ret_=$?
if want_trace
then
test 1 = $trace_level_ && set +x
trace_level_=$(($trace_level_-1))
- fi
- } 2>/dev/null 4>&2
- if test "$test_eval_ret_" != 0 && want_trace
- then
- say_color error >&4 "error: last command exited with \$?=$test_eval_ret_"
- fi
+ if test "$test_eval_ret_" != 0
+ then
+ say_color error >&4 "error: last command exited with \$?=$test_eval_ret_"
+ fi
+ fi
+ } 2>/dev/null
return $test_eval_ret_
}
--
2.34.1.876.gdb91009a90c
