This series is based on vd/sparse-reset. It integrates the sparse index with
git diff and git blame and includes:
1. tests added to t1092 and p2000 to establish the baseline functionality
of the commands
2. repository settings to enable the sparse index
The p2000 tests demonstrate a ~30% execution time reduction for 'git diff'
and a ~75% execution time reduction for 'git diff --staged' using a sparse
index. For 'git blame', the reduction time was ~60% for a file two levels
deep and ~30% for a file three levels deep.
Test before after
----------------------------------------------------------------
2000.30: git diff (full-v3) 0.37 0.36 -2.7%
2000.31: git diff (full-v4) 0.36 0.35 -2.8%
2000.32: git diff (sparse-v3) 0.46 0.30 -34.8%
2000.33: git diff (sparse-v4) 0.43 0.31 -27.9%
2000.34: git diff --staged (full-v3) 0.08 0.08 +0.0%
2000.35: git diff --staged (full-v4) 0.08 0.08 +0.0%
2000.36: git diff --staged (sparse-v3) 0.17 0.04 -76.5%
2000.37: git diff --staged (sparse-v4) 0.16 0.04 -75.0%
2000.62: git blame f2/f4/a (full-v3) 0.31 0.32 +3.2%
2000.63: git blame f2/f4/a (full-v4) 0.29 0.31 +6.9%
2000.64: git blame f2/f4/a (sparse-v3) 0.55 0.23 -58.2%
2000.65: git blame f2/f4/a (sparse-v4) 0.57 0.23 -59.6%
2000.66: git blame f2/f4/f3/a (full-v3) 0.77 0.85 +10.4%
2000.67: git blame f2/f4/f3/a (full-v4) 0.78 0.81 +3.8%
2000.68: git blame f2/f4/f3/a (sparse-v3) 1.07 0.72 -32.7%
2000.99: git blame f2/f4/f3/a (sparse-v4) 1.05 0.73 -30.5%
Changes since V1
================
* Fix failing diff partially-staged test in
t1092-sparse-checkout-compatibility.sh, which was breaking in seen.
Changes since V2
================
* Update diff commit description to include patches that make the checkout
and status commands work with the sparse index for readers to reference.
* Add new test case to verify diff behaves as expected when run against
files outside the sparse checkout cone.
* Indent error message in blame commit
* Check error message in blame with pathspec outside sparse definition test
matches expectations.
* Loop blame tests (instead of running the same command multiple time
against different files).
Thanks, Lessley
Lessley Dennington (2):
diff: enable and test the sparse index
blame: enable and test the sparse index
builtin/blame.c | 3 +
builtin/diff.c | 3 +
t/perf/p2000-sparse-operations.sh | 4 +
t/t1092-sparse-checkout-compatibility.sh | 94 +++++++++++++++++++++---
4 files changed, 93 insertions(+), 11 deletions(-)
base-commit: 7159bf518eed5c997cf4ff0f17d9cb69192a091c
Published-As: https://github.com/gitgitgadget/git/releases/tag/pr-1050%2Fldennington%2Fdiff-blame-sparse-index-v3
Fetch-It-Via: git fetch https://github.com/gitgitgadget/git pr-1050/ldennington/diff-blame-sparse-index-v3
Pull-Request: https://github.com/gitgitgadget/git/pull/1050
Range-diff vs v2:
1: ac33159d020 ! 1: 991aaad37b4 diff: enable and test the sparse index
@@ Commit message
Enable the sparse index within the 'git diff' command. Its implementation
already safely integrates with the sparse index because it shares code with
the 'git status' and 'git checkout' commands that were already integrated.
+ For more details see:
+
+ d76723ee53 (status: use sparse-index throughout, 2021-07-14)
+ 1ba5f45132 (checkout: stop expanding sparse indexes, 2021-06-29)
+
The most interesting thing to do is to add tests that verify that 'git diff'
behaves correctly when the sparse index is enabled. These cases are:
@@ t/perf/p2000-sparse-operations.sh: test_perf_on_all git checkout -f -
test_done
## t/t1092-sparse-checkout-compatibility.sh ##
-@@ t/t1092-sparse-checkout-compatibility.sh: test_expect_success 'diff --staged' '
- test_all_match git diff --staged
+@@ t/t1092-sparse-checkout-compatibility.sh: test_expect_success 'sparse-index is not expanded: merge conflict in cone' '
+ )
'
-+test_expect_success 'diff partially-staged' '
++test_expect_success 'sparse index is not expanded: diff' '
+ init_repos &&
+
+ write_script edit-contents <<-\EOF &&
@@ t/t1092-sparse-checkout-compatibility.sh: test_expect_success 'diff --staged' '
+
+ test_all_match git diff &&
+ test_all_match git diff --staged &&
++ ensure_not_expanded diff &&
++ ensure_not_expanded diff --staged &&
+
+ # Add file outside cone
+ test_all_match git reset --hard &&
@@ t/t1092-sparse-checkout-compatibility.sh: test_expect_success 'diff --staged' '
+
+ test_all_match git diff &&
+ test_all_match git diff --staged &&
++ ensure_not_expanded diff &&
++ ensure_not_expanded diff --staged &&
+
+ # Merge conflict outside cone
+ # The sparse checkout will report a warning that is not in the
@@ t/t1092-sparse-checkout-compatibility.sh: test_expect_success 'diff --staged' '
+ test_all_match test_must_fail git merge merge-right &&
+
+ test_all_match git diff &&
-+ test_all_match git diff --staged
-+'
-+
- # NEEDSWORK: sparse-checkout behaves differently from full-checkout when
- # running this test with 'df-conflict-2' after 'df-conflict-1'.
- test_expect_success 'diff with renames and conflicts' '
-@@ t/t1092-sparse-checkout-compatibility.sh: test_expect_success 'sparse-index is not expanded' '
- # Wildcard identifies only full sparse directories, no index expansion
- ensure_not_expanded reset deepest -- folder\* &&
-
-+ echo a test change >>sparse-index/README.md &&
++ test_all_match git diff --staged &&
+ ensure_not_expanded diff &&
-+ git -C sparse-index add README.md &&
-+ ensure_not_expanded diff --staged &&
++ ensure_not_expanded diff --staged
++'
+
- ensure_not_expanded checkout -f update-deep &&
- test_config -C sparse-index pull.twohead ort &&
- (
+ # NEEDSWORK: a sparse-checkout behaves differently from a full checkout
+ # in this scenario, but it shouldn't.
+ test_expect_success 'reset mixed and checkout orphan' '
2: a0b6a152c75 ! 2: cfdd33129ec blame: enable and test the sparse index
@@ Commit message
currently does not support blaming files outside of the sparse definition.
Attempting to do so fails with the following error:
- fatal: no such path '<path outside sparse definition>' in HEAD
+ fatal: no such path '<path outside sparse definition>' in HEAD
Signed-off-by: Lessley Dennington <lessleydennington@xxxxxxxxx>
@@ t/perf/p2000-sparse-operations.sh: test_perf_on_all git reset --hard
test_done
## t/t1092-sparse-checkout-compatibility.sh ##
-@@ t/t1092-sparse-checkout-compatibility.sh: test_expect_success 'blame with pathspec inside sparse definition' '
- test_all_match git blame deep/deeper1/deepest/a
+@@ t/t1092-sparse-checkout-compatibility.sh: test_expect_success 'log with pathspec outside sparse definition' '
+ test_expect_success 'blame with pathspec inside sparse definition' '
+ init_repos &&
+
+- test_all_match git blame a &&
+- test_all_match git blame deep/a &&
+- test_all_match git blame deep/deeper1/a &&
+- test_all_match git blame deep/deeper1/deepest/a
++ for file in a \
++ deep/a \
++ deep/deeper1/a \
++ deep/deeper1/deepest/a
++ do
++ test_all_match git blame $file
++ done
'
-# TODO: blame currently does not support blaming files outside of the
@@ t/t1092-sparse-checkout-compatibility.sh: test_expect_success 'blame with pathsp
+# definition, so we verify this scenario.
+test_expect_success 'blame with pathspec outside sparse definition' '
init_repos &&
++ test_sparse_match git sparse-checkout set &&
- test_all_match git blame folder1/a &&
- test_all_match git blame folder2/a &&
- test_all_match git blame deep/deeper2/a &&
- test_all_match git blame deep/deeper2/deepest/a
-+ test_sparse_match git sparse-checkout set &&
-+ test_sparse_match test_must_fail git blame folder1/a &&
-+ test_sparse_match test_must_fail git blame folder2/a &&
-+ test_sparse_match test_must_fail git blame deep/deeper2/a &&
-+ test_sparse_match test_must_fail git blame deep/deeper2/deepest/a
++ for file in a \
++ deep/a \
++ deep/deeper1/a \
++ deep/deeper1/deepest/a
++ do
++ test_sparse_match test_must_fail git blame $file &&
++ cat >expect <<-EOF &&
++ fatal: Cannot lstat '"'"'$file'"'"': No such file or directory
++ EOF
++ # We compare sparse-checkout-err and sparse-index-err in
++ # `test_sparse_match`. Given we know they are the same, we
++ # only check the content of sparse-index-err here.
++ test_cmp expect sparse-index-err
++ done
'
test_expect_success 'checkout and reset (mixed)' '
-@@ t/t1092-sparse-checkout-compatibility.sh: test_expect_success 'sparse-index is not expanded: merge conflict in cone' '
- )
+@@ t/t1092-sparse-checkout-compatibility.sh: test_expect_success 'sparse index is not expanded: diff' '
+ ensure_not_expanded diff --staged
'
+test_expect_success 'sparse index is not expanded: blame' '
+ init_repos &&
+
-+ ensure_not_expanded blame a &&
-+ ensure_not_expanded blame deep/a &&
-+ ensure_not_expanded blame deep/deeper1/a &&
-+ ensure_not_expanded blame deep/deeper1/deepest/a
++ for file in a \
++ deep/a \
++ deep/deeper1/a \
++ deep/deeper1/deepest/a
++ do
++ ensure_not_expanded blame $file
++ done
+'
+
# NEEDSWORK: a sparse-checkout behaves differently from a full checkout
--
gitgitgadget
