Re: [PATCH 00/10] leak tests: mark more tests as passing

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Oct 6, 2021 at 2:50 AM Ævar Arnfjörð Bjarmason <avarab@xxxxxxxxx> wrote:
>
> This goes on top of ab/sanitize-leak-ci, in that topic I introduced a
> "linux-leaks" job that runs in CI and checks that we don't have
> SANITIZE=leak regressions, but it just marked one test file as passing
> under that mode.
>
> That was out of an abundance of caution, and to not conflate any
> potential failures with the mode itself.
>
> This series marks up a lot of tests as passing, ensuring that they
> won't regress when it comes to memory leaks.

I like the series.  It does have the potential to annoy folks who want
to add additional tests which make use of git commands outside the
area they are modifying and which happen to have pre-existing leaks.
But, I think in such cases, they could just remove the
TEST_PASSES_SANITIZE_LEAK=true and mention it in their commit message.
And when the checks fail because of a git command someone is
modifying, then we get useful early signal and the author can address
the problem.

>
> I did a "git rebase -i --exec" of each of these commits where I merged
> with origin/seen, ran all tests under
> GIT_TEST_PASSING_SANITIZE_LEAK=true. They all pass, so hopefully these
> won't cause any disruption. I was careful to leave out any areas that
> are actively being worked on (e.g. I had to eject a test in the
> "sparse" area, since it would pass on master+ab/sanitize-leak-ci, but
> has a regression in "seen". I didn't look into why).
>
> Ævar Arnfjörð Bjarmason (10):
>   leak tests: run various built-in tests in t00*.sh SANITIZE=leak
>   leak tests: run various "test-tool" tests in t00*.sh SANITIZE=leak
>   leak tests: mark t0000-init.sh as passing with SANITIZE=leak
>   leak tests: mark all ls-tree tests as passing with SANITIZE=leak
>   leak tests: mark all trace2 tests as passing with SANITIZE=leak
>   leak tests: mark all checkout-index tests as passing with
>     SANITIZE=leak
>   leak tests: mark some ls-files tests as passing with SANITIZE=leak
>   leak tests: mark some read-tree tests as passing with SANITIZE=leak
>   leak tests: mark various "generic" tests as passing with SANITIZE=leak
>   leak tests: mark some misc tests as passing with SANITIZE=leak
>
>  t/t0001-init.sh                         | 1 +
>  t/t0002-gitfile.sh                      | 1 +
>  t/t0003-attributes.sh                   | 1 +
>  t/t0005-signals.sh                      | 2 ++
>  t/t0007-git-var.sh                      | 2 ++
>  t/t0008-ignores.sh                      | 1 +
>  t/t0010-racy-git.sh                     | 1 +
>  t/t0013-sha1dc.sh                       | 2 ++
>  t/t0022-crlf-rename.sh                  | 1 +
>  t/t0024-crlf-archive.sh                 | 1 +
>  t/t0025-crlf-renormalize.sh             | 1 +
>  t/t0026-eol-config.sh                   | 1 +
>  t/t0029-core-unsetenvvars.sh            | 1 +
>  t/t0052-simple-ipc.sh                   | 1 +
>  t/t0055-beyond-symlinks.sh              | 1 +
>  t/t0061-run-command.sh                  | 1 +
>  t/t0065-strcmp-offset.sh                | 1 +
>  t/t0066-dir-iterator.sh                 | 1 +
>  t/t0067-parse_pathspec_file.sh          | 1 +
>  t/t0210-trace2-normal.sh                | 2 ++
>  t/t0211-trace2-perf.sh                  | 2 ++
>  t/t0212-trace2-event.sh                 | 2 ++
>  t/t1000-read-tree-m-3way.sh             | 2 ++
>  t/t1003-read-tree-prefix.sh             | 1 +
>  t/t1009-read-tree-new-index.sh          | 1 +
>  t/t1010-mktree.sh                       | 1 +
>  t/t1012-read-tree-df.sh                 | 1 +
>  t/t1014-read-tree-confusing.sh          | 2 ++
>  t/t1100-commit-tree-options.sh          | 1 +
>  t/t1430-bad-ref-name.sh                 | 1 +
>  t/t1504-ceiling-dirs.sh                 | 2 ++
>  t/t1510-repo-setup.sh                   | 1 +
>  t/t2002-checkout-cache-u.sh             | 1 +
>  t/t2003-checkout-cache-mkdir.sh         | 1 +
>  t/t2004-checkout-cache-temp.sh          | 1 +
>  t/t2005-checkout-index-symlinks.sh      | 1 +
>  t/t2050-git-dir-relative.sh             | 1 +
>  t/t2081-parallel-checkout-collisions.sh | 1 +
>  t/t2300-cd-to-toplevel.sh               | 1 +
>  t/t3000-ls-files-others.sh              | 2 ++
>  t/t3002-ls-files-dashpath.sh            | 2 ++
>  t/t3003-ls-files-exclude.sh             | 2 ++
>  t/t3004-ls-files-basic.sh               | 1 +
>  t/t3006-ls-files-long.sh                | 2 ++
>  t/t3008-ls-files-lazy-init-name-hash.sh | 1 +
>  t/t3070-wildmatch.sh                    | 1 +
>  t/t3100-ls-tree-restrict.sh             | 2 ++
>  t/t3101-ls-tree-dirname.sh              | 2 ++
>  t/t3102-ls-tree-wildcards.sh            | 1 +
>  t/t3103-ls-tree-misc.sh                 | 1 +
>  t/t3205-branch-color.sh                 | 1 +
>  t/t3211-peel-ref.sh                     | 1 +
>  t/t3300-funny-names.sh                  | 1 +
>  t/t3601-rm-pathspec-file.sh             | 1 +
>  t/t3902-quoted.sh                       | 1 +
>  t/t4002-diff-basic.sh                   | 2 ++
>  t/t4016-diff-quote.sh                   | 1 +
>  t/t4019-diff-wserror.sh                 | 1 +
>  t/t4025-hunk-header.sh                  | 1 +
>  t/t4026-color.sh                        | 2 ++
>  t/t4300-merge-tree.sh                   | 2 ++
>  t/t5580-unc-paths.sh                    | 1 +
>  t/t5615-alternate-env.sh                | 2 ++
>  t/t7518-ident-corner-cases.sh           | 2 ++
>  t/t7812-grep-icase-non-ascii.sh         | 1 +
>  t/t7813-grep-icase-iso.sh               | 1 +
>  t/t7816-grep-binary-pattern.sh          | 1 +
>  67 files changed, 87 insertions(+)
>
> --
> 2.33.0.1441.gbbcdb4c3c66




[Index of Archives]     [Linux Kernel Development]     [Gcc Help]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [V4L]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]     [Fedora Users]

  Powered by Linux