From: Elijah Newren <newren@xxxxxxxxx>
This fixes a long-standing patchwork of ignored files handling in
read-tree and merge-recursive, called out and suggested by Junio long
ago. Quoting from commit dcf0c16ef1 ("core.excludesfile clean-up"
2007-11-16):
git-read-tree takes --exclude-per-directory=<gitignore>,
not because the flexibility was needed. Again, this was
because the option predates the standardization of the ignore
files.
...
On the other hand, I think it makes perfect sense to fix
git-read-tree, git-merge-recursive and git-clean to follow the
same rule as other commands. I do not think of a valid use case
to give an exclude-per-directory that is nonstandard to
read-tree command, outside a "negative" test in the t1004 test
script.
This patch is the first step to untangle this mess.
The next step would be to teach read-tree, merge-recursive and
clean (in C) to use setup_standard_excludes().
History shows each of these were partially or fully fixed:
* clean was taught the new trick in 1617adc7a0 ("Teach git clean to
use setup_standard_excludes()", 2007-11-14).
* read-tree was primarily used by checkout & merge scripts. checkout
and merge later became builtins and were both fixed to use the new
setup_standard_excludes() handling in fc001b526c ("checkout,merge:
loosen overwriting untracked file check based on info/exclude",
2011-11-27). So the primary users were fixed, though read-tree
itself was not.
* merge-recursive has now been replaced as the default merge backend
by merge-ort. merge-ort fixed this by using
setup_standard_excludes() starting early in its implementation; see
commit 6681ce5cf6 ("merge-ort: add implementation of checkout()",
2020-12-13), largely due to its design depending on checkout() and
thus being influenced by the checkout code. However,
merge-recursive itself was not fixed here, in part because its
design meant it had difficulty differentiating between untracked
files, ignored files, leftover tracked files that haven't been
removed yet due to order of processing files, and files written by
itself due to collisions).
Make the conversion more complete by now handling read-tree and
handling at least the unpack_trees() portion of merge-recursive. While
merge-recursive is on its way out, fixing the unpack_trees() portion is
easy and facilitates some of the later changes in this series. Note
that fixing read-tree makes the --exclude-per-directory option to
read-tree useless, so we remove it from the documentation (though we
continue to accept it if passed).
The read-tree changes happen to fix a bug in t1013.
Signed-off-by: Elijah Newren <newren@xxxxxxxxx>
---
Documentation/git-read-tree.txt | 18 +-----------------
builtin/read-tree.c | 25 ++++++++++---------------
merge-recursive.c | 11 ++++++++++-
t/t1013-read-tree-submodule.sh | 1 -
4 files changed, 21 insertions(+), 34 deletions(-)
diff --git a/Documentation/git-read-tree.txt b/Documentation/git-read-tree.txt
index 5fa8bab64c2..0222a27c5af 100644
--- a/Documentation/git-read-tree.txt
+++ b/Documentation/git-read-tree.txt
@@ -10,8 +10,7 @@ SYNOPSIS
--------
[verse]
'git read-tree' [[-m [--trivial] [--aggressive] | --reset | --prefix=<prefix>]
- [-u [--exclude-per-directory=<gitignore>] | -i]]
- [--index-output=<file>] [--no-sparse-checkout]
+ [-u | -i]] [--index-output=<file>] [--no-sparse-checkout]
(--empty | <tree-ish1> [<tree-ish2> [<tree-ish3>]])
@@ -88,21 +87,6 @@ OPTIONS
The command will refuse to overwrite entries that already
existed in the original index file.
---exclude-per-directory=<gitignore>::
- When running the command with `-u` and `-m` options, the
- merge result may need to overwrite paths that are not
- tracked in the current branch. The command usually
- refuses to proceed with the merge to avoid losing such a
- path. However this safety valve sometimes gets in the
- way. For example, it often happens that the other
- branch added a file that used to be a generated file in
- your branch, and the safety valve triggers when you try
- to switch to that branch after you ran `make` but before
- running `make clean` to remove the generated file. This
- option tells the command to read per-directory exclude
- file (usually '.gitignore') and allows such an untracked
- but explicitly ignored file to be overwritten.
-
--index-output=<file>::
Instead of writing the results out to `$GIT_INDEX_FILE`,
write the resulting index in the named file. While the
diff --git a/builtin/read-tree.c b/builtin/read-tree.c
index 96102c222bf..73cb957a69b 100644
--- a/builtin/read-tree.c
+++ b/builtin/read-tree.c
@@ -38,7 +38,7 @@ static int list_tree(struct object_id *oid)
}
static const char * const read_tree_usage[] = {
- N_("git read-tree [(-m [--trivial] [--aggressive] | --reset | --prefix=<prefix>) [-u [--exclude-per-directory=<gitignore>] | -i]] [--no-sparse-checkout] [--index-output=<file>] (--empty | <tree-ish1> [<tree-ish2> [<tree-ish3>]])"),
+ N_("git read-tree [(-m [--trivial] [--aggressive] | --reset | --prefix=<prefix>) [-u | -i]] [--no-sparse-checkout] [--index-output=<file>] (--empty | <tree-ish1> [<tree-ish2> [<tree-ish3>]])"),
NULL
};
@@ -53,24 +53,16 @@ static int index_output_cb(const struct option *opt, const char *arg,
static int exclude_per_directory_cb(const struct option *opt, const char *arg,
int unset)
{
- struct dir_struct *dir;
struct unpack_trees_options *opts;
BUG_ON_OPT_NEG(unset);
opts = (struct unpack_trees_options *)opt->value;
- if (opts->dir)
- die("more than one --exclude-per-directory given.");
-
- dir = xcalloc(1, sizeof(*opts->dir));
- dir->flags |= DIR_SHOW_IGNORED;
- dir->exclude_per_dir = arg;
- opts->dir = dir;
- /* We do not need to nor want to do read-directory
- * here; we are merely interested in reusing the
- * per directory ignore stack mechanism.
- */
+ if (!opts->update)
+ die("--exclude-per-directory is meaningless unless -u");
+ if (strcmp(arg, ".gitignore"))
+ die("--exclude-per-directory argument must be .gitignore");
return 0;
}
@@ -209,8 +201,11 @@ int cmd_read_tree(int argc, const char **argv, const char *cmd_prefix)
if ((opts.update || opts.index_only) && !opts.merge)
die("%s is meaningless without -m, --reset, or --prefix",
opts.update ? "-u" : "-i");
- if ((opts.dir && !opts.update))
- die("--exclude-per-directory is meaningless unless -u");
+ if (opts.update && !opts.reset) {
+ CALLOC_ARRAY(opts.dir, 1);
+ opts.dir->flags |= DIR_SHOW_IGNORED;
+ setup_standard_excludes(opts.dir);
+ }
if (opts.merge && !opts.index_only)
setup_work_tree();
diff --git a/merge-recursive.c b/merge-recursive.c
index e594d4c3fa1..233d9f686ad 100644
--- a/merge-recursive.c
+++ b/merge-recursive.c
@@ -408,8 +408,13 @@ static int unpack_trees_start(struct merge_options *opt,
memset(&opt->priv->unpack_opts, 0, sizeof(opt->priv->unpack_opts));
if (opt->priv->call_depth)
opt->priv->unpack_opts.index_only = 1;
- else
+ else {
opt->priv->unpack_opts.update = 1;
+ /* FIXME: should only do this if !overwrite_ignore */
+ CALLOC_ARRAY(opt->priv->unpack_opts.dir, 1);
+ opt->priv->unpack_opts.dir->flags |= DIR_SHOW_IGNORED;
+ setup_standard_excludes(opt->priv->unpack_opts.dir);
+ }
opt->priv->unpack_opts.merge = 1;
opt->priv->unpack_opts.head_idx = 2;
opt->priv->unpack_opts.fn = threeway_merge;
@@ -423,6 +428,10 @@ static int unpack_trees_start(struct merge_options *opt,
init_tree_desc_from_tree(t+2, merge);
rc = unpack_trees(3, t, &opt->priv->unpack_opts);
+ if (opt->priv->unpack_opts.dir) {
+ dir_clear(opt->priv->unpack_opts.dir);
+ FREE_AND_NULL(opt->priv->unpack_opts.dir);
+ }
cache_tree_free(&opt->repo->index->cache_tree);
/*
diff --git a/t/t1013-read-tree-submodule.sh b/t/t1013-read-tree-submodule.sh
index b6df7444c05..bfc90d4cf27 100755
--- a/t/t1013-read-tree-submodule.sh
+++ b/t/t1013-read-tree-submodule.sh
@@ -6,7 +6,6 @@ test_description='read-tree can handle submodules'
. "$TEST_DIRECTORY"/lib-submodule-update.sh
KNOWN_FAILURE_DIRECTORY_SUBMODULE_CONFLICTS=1
-KNOWN_FAILURE_SUBMODULE_OVERWRITE_IGNORED_UNTRACKED=1
test_submodule_switch_recursing_with_args "read-tree -u -m"
--
gitgitgadget
