[PATCH v4 12/13] mv: refuse to move sparse paths

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Derrick Stolee <dstolee@xxxxxxxxxxxxx>

Since cmd_mv() does not operate on cache entries and instead directly
checks the filesystem, we can only use path_in_sparse_checkout() as a
mechanism for seeing if a path is sparse or not. Be sure to skip
returning a failure if '-k' is specified.

To ensure that the advice around sparse paths is the only reason a move
failed, be sure to check this as the very last thing before inserting
into the src_for_dst list.

The tests cover a variety of cases such as whether the target is tracked
or untracked, and whether the source or destination are in or outside of
the sparse-checkout definition.

Helped-by: Matheus Tavares Bernardino <matheus.bernardino@xxxxxx>
Signed-off-by: Derrick Stolee <dstolee@xxxxxxxxxxxxx>
---
 builtin/mv.c                  |  52 ++++++++--
 t/t7002-mv-sparse-checkout.sh | 186 ++++++++++++++++++++++++++++++++++
 2 files changed, 229 insertions(+), 9 deletions(-)
 create mode 100755 t/t7002-mv-sparse-checkout.sh

diff --git a/builtin/mv.c b/builtin/mv.c
index c2f96c8e895..83a465ba831 100644
--- a/builtin/mv.c
+++ b/builtin/mv.c
@@ -118,21 +118,23 @@ static int index_range_of_same_dir(const char *src, int length,
 int cmd_mv(int argc, const char **argv, const char *prefix)
 {
 	int i, flags, gitmodules_modified = 0;
-	int verbose = 0, show_only = 0, force = 0, ignore_errors = 0;
+	int verbose = 0, show_only = 0, force = 0, ignore_errors = 0, ignore_sparse = 0;
 	struct option builtin_mv_options[] = {
 		OPT__VERBOSE(&verbose, N_("be verbose")),
 		OPT__DRY_RUN(&show_only, N_("dry run")),
 		OPT__FORCE(&force, N_("force move/rename even if target exists"),
 			   PARSE_OPT_NOCOMPLETE),
 		OPT_BOOL('k', NULL, &ignore_errors, N_("skip move/rename errors")),
+		OPT_BOOL(0, "sparse", &ignore_sparse, N_("allow updating entries outside of the sparse-checkout cone")),
 		OPT_END(),
 	};
 	const char **source, **destination, **dest_path, **submodule_gitfile;
-	enum update_mode { BOTH = 0, WORKING_DIRECTORY, INDEX } *modes;
+	enum update_mode { BOTH = 0, WORKING_DIRECTORY, INDEX, SPARSE } *modes;
 	struct stat st;
 	struct string_list src_for_dst = STRING_LIST_INIT_NODUP;
 	struct lock_file lock_file = LOCK_INIT;
 	struct cache_entry *ce;
+	struct string_list only_match_skip_worktree = STRING_LIST_INIT_NODUP;
 
 	git_config(git_default_config, NULL);
 
@@ -176,14 +178,17 @@ int cmd_mv(int argc, const char **argv, const char *prefix)
 		const char *src = source[i], *dst = destination[i];
 		int length, src_is_dir;
 		const char *bad = NULL;
+		int skip_sparse = 0;
 
 		if (show_only)
 			printf(_("Checking rename of '%s' to '%s'\n"), src, dst);
 
 		length = strlen(src);
-		if (lstat(src, &st) < 0)
-			bad = _("bad source");
-		else if (!strncmp(src, dst, length) &&
+		if (lstat(src, &st) < 0) {
+			/* only error if existence is expected. */
+			if (modes[i] != SPARSE)
+				bad = _("bad source");
+		} else if (!strncmp(src, dst, length) &&
 				(dst[length] == 0 || dst[length] == '/')) {
 			bad = _("can not move directory into itself");
 		} else if ((src_is_dir = S_ISDIR(st.st_mode))
@@ -212,11 +217,12 @@ int cmd_mv(int argc, const char **argv, const char *prefix)
 				dst_len = strlen(dst);
 
 				for (j = 0; j < last - first; j++) {
-					const char *path = active_cache[first + j]->name;
+					const struct cache_entry *ce = active_cache[first + j];
+					const char *path = ce->name;
 					source[argc + j] = path;
 					destination[argc + j] =
 						prefix_path(dst, dst_len, path + length + 1);
-					modes[argc + j] = INDEX;
+					modes[argc + j] = ce_skip_worktree(ce) ? SPARSE : INDEX;
 					submodule_gitfile[argc + j] = NULL;
 				}
 				argc += last - first;
@@ -244,14 +250,36 @@ int cmd_mv(int argc, const char **argv, const char *prefix)
 			bad = _("multiple sources for the same target");
 		else if (is_dir_sep(dst[strlen(dst) - 1]))
 			bad = _("destination directory does not exist");
-		else
+		else {
+			/*
+			 * We check if the paths are in the sparse-checkout
+			 * definition as a very final check, since that
+			 * allows us to point the user to the --sparse
+			 * option as a way to have a successful run.
+			 */
+			if (!ignore_sparse &&
+			    !path_in_sparse_checkout(src, &the_index)) {
+				string_list_append(&only_match_skip_worktree, src);
+				skip_sparse = 1;
+			}
+			if (!ignore_sparse &&
+			    !path_in_sparse_checkout(dst, &the_index)) {
+				string_list_append(&only_match_skip_worktree, dst);
+				skip_sparse = 1;
+			}
+
+			if (skip_sparse)
+				goto remove_entry;
+
 			string_list_insert(&src_for_dst, dst);
+		}
 
 		if (!bad)
 			continue;
 		if (!ignore_errors)
 			die(_("%s, source=%s, destination=%s"),
 			     bad, src, dst);
+remove_entry:
 		if (--argc > 0) {
 			int n = argc - i;
 			memmove(source + i, source + i + 1,
@@ -266,6 +294,12 @@ int cmd_mv(int argc, const char **argv, const char *prefix)
 		}
 	}
 
+	if (only_match_skip_worktree.nr) {
+		advise_on_updating_sparse_paths(&only_match_skip_worktree);
+		if (!ignore_errors)
+			return 1;
+	}
+
 	for (i = 0; i < argc; i++) {
 		const char *src = source[i], *dst = destination[i];
 		enum update_mode mode = modes[i];
@@ -274,7 +308,7 @@ int cmd_mv(int argc, const char **argv, const char *prefix)
 			printf(_("Renaming %s to %s\n"), src, dst);
 		if (show_only)
 			continue;
-		if (mode != INDEX && rename(src, dst) < 0) {
+		if (mode != INDEX && mode != SPARSE && rename(src, dst) < 0) {
 			if (ignore_errors)
 				continue;
 			die_errno(_("renaming '%s' failed"), src);
diff --git a/t/t7002-mv-sparse-checkout.sh b/t/t7002-mv-sparse-checkout.sh
new file mode 100755
index 00000000000..07dbfeb6d17
--- /dev/null
+++ b/t/t7002-mv-sparse-checkout.sh
@@ -0,0 +1,186 @@
+#!/bin/sh
+
+test_description='git mv in sparse working trees'
+
+. ./test-lib.sh
+
+test_expect_success 'setup' "
+	mkdir -p sub/dir sub/dir2 &&
+	touch a b c sub/d sub/dir/e sub/dir2/e &&
+	git add -A &&
+	git commit -m files &&
+
+	cat >sparse_error_header <<-EOF &&
+	The following pathspecs didn't match any eligible path, but they do match index
+	entries outside the current sparse checkout:
+	EOF
+
+	cat >sparse_hint <<-EOF
+	hint: Disable or modify the sparsity rules if you intend to update such entries.
+	hint: Disable this message with \"git config advice.updateSparsePath false\"
+	EOF
+"
+
+test_expect_success 'mv refuses to move sparse-to-sparse' '
+	test_when_finished rm -f e &&
+	git reset --hard &&
+	git sparse-checkout set a &&
+	touch b &&
+	test_must_fail git mv b e 2>stderr &&
+	cat sparse_error_header >expect &&
+	echo b >>expect &&
+	echo e >>expect &&
+	cat sparse_hint >>expect &&
+	test_cmp expect stderr &&
+	git mv --sparse b e 2>stderr &&
+	test_must_be_empty stderr
+'
+
+test_expect_success 'mv refuses to move sparse-to-sparse, ignores failure' '
+	test_when_finished rm -f b c e &&
+	git reset --hard &&
+	git sparse-checkout set a &&
+
+	# tracked-to-untracked
+	touch b &&
+	git mv -k b e 2>stderr &&
+	test_path_exists b &&
+	test_path_is_missing e &&
+	cat sparse_error_header >expect &&
+	echo b >>expect &&
+	echo e >>expect &&
+	cat sparse_hint >>expect &&
+	test_cmp expect stderr &&
+
+	git mv --sparse b e 2>stderr &&
+	test_must_be_empty stderr &&
+	test_path_is_missing b &&
+	test_path_exists e &&
+
+	# tracked-to-tracked
+	git reset --hard &&
+	touch b &&
+	git mv -k b c 2>stderr &&
+	test_path_exists b &&
+	test_path_is_missing c &&
+	cat sparse_error_header >expect &&
+	echo b >>expect &&
+	echo c >>expect &&
+	cat sparse_hint >>expect &&
+	test_cmp expect stderr &&
+
+	git mv --sparse b c 2>stderr &&
+	test_must_be_empty stderr &&
+	test_path_is_missing b &&
+	test_path_exists c
+'
+
+test_expect_success 'mv refuses to move non-sparse-to-sparse' '
+	test_when_finished rm -f b c e &&
+	git reset --hard &&
+	git sparse-checkout set a &&
+
+	# tracked-to-untracked
+	test_must_fail git mv a e 2>stderr &&
+	test_path_exists a &&
+	test_path_is_missing e &&
+	cat sparse_error_header >expect &&
+	echo e >>expect &&
+	cat sparse_hint >>expect &&
+	test_cmp expect stderr &&
+	git mv --sparse a e 2>stderr &&
+	test_must_be_empty stderr &&
+	test_path_is_missing a &&
+	test_path_exists e &&
+
+	# tracked-to-tracked
+	rm e &&
+	git reset --hard &&
+	test_must_fail git mv a c 2>stderr &&
+	test_path_exists a &&
+	test_path_is_missing c &&
+	cat sparse_error_header >expect &&
+	echo c >>expect &&
+	cat sparse_hint >>expect &&
+	test_cmp expect stderr &&
+	git mv --sparse a c 2>stderr &&
+	test_must_be_empty stderr &&
+	test_path_is_missing a &&
+	test_path_exists c
+'
+
+test_expect_success 'mv refuses to move sparse-to-non-sparse' '
+	test_when_finished rm -f b c e &&
+	git reset --hard &&
+	git sparse-checkout set a e &&
+
+	# tracked-to-untracked
+	touch b &&
+	test_must_fail git mv b e 2>stderr &&
+	cat sparse_error_header >expect &&
+	echo b >>expect &&
+	cat sparse_hint >>expect &&
+	test_cmp expect stderr &&
+	git mv --sparse b e 2>stderr &&
+	test_must_be_empty stderr
+'
+
+test_expect_success 'recursive mv refuses to move (possible) sparse' '
+	test_when_finished rm -rf b c e sub2 &&
+	git reset --hard &&
+	# Without cone mode, "sub" and "sub2" do not match
+	git sparse-checkout set sub/dir sub2/dir &&
+
+	# Add contained contents to ensure we avoid non-existence errors
+	mkdir sub/dir2 &&
+	touch sub/d sub/dir2/e &&
+
+	test_must_fail git mv sub sub2 2>stderr &&
+	cat sparse_error_header >expect &&
+	cat >>expect <<-\EOF &&
+	sub/d
+	sub2/d
+	sub/dir/e
+	sub2/dir/e
+	sub/dir2/e
+	sub2/dir2/e
+	EOF
+	cat sparse_hint >>expect &&
+	test_cmp expect stderr &&
+	git mv --sparse sub sub2 2>stderr &&
+	test_must_be_empty stderr &&
+	git commit -m "moved sub to sub2" &&
+	git rev-parse HEAD~1:sub >expect &&
+	git rev-parse HEAD:sub2 >actual &&
+	test_cmp expect actual &&
+	git reset --hard HEAD~1
+'
+
+test_expect_success 'recursive mv refuses to move sparse' '
+	git reset --hard &&
+	# Use cone mode so "sub/" matches the sparse-checkout patterns
+	git sparse-checkout init --cone &&
+	git sparse-checkout set sub/dir sub2/dir &&
+
+	# Add contained contents to ensure we avoid non-existence errors
+	mkdir sub/dir2 &&
+	touch sub/dir2/e &&
+
+	test_must_fail git mv sub sub2 2>stderr &&
+	cat sparse_error_header >expect &&
+	cat >>expect <<-\EOF &&
+	sub/dir2/e
+	sub2/dir2/e
+	EOF
+	cat sparse_hint >>expect &&
+	test_cmp expect stderr &&
+	git mv --sparse sub sub2 2>stderr &&
+	test_must_be_empty stderr &&
+	git commit -m "moved sub to sub2" &&
+	git rev-parse HEAD~1:sub >expect &&
+	git rev-parse HEAD:sub2 >actual &&
+	test_cmp expect actual &&
+	git reset --hard HEAD~1
+'
+
+test_done
-- 
gitgitgadget




[Index of Archives]     [Linux Kernel Development]     [Gcc Help]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [V4L]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]     [Fedora Users]

  Powered by Linux