The standard `die()` function that is used in C code prefixes all the
messages passed to it with 'fatal: '. This does not happen with the
`die` used in 'git-submodule.sh'.
Let's prefix each of the shell die messages with 'fatal: ' so that when
they are converted to C code, the error messages stay the same as before
the conversion.
Note that the shell version of `die` exits with error code 1, while the
C version exits with error code 128. In practice, this does not change
any behaviour, as no functionality in 'submodule add' and 'submodule
update' relies on the value of the exit code.
Signed-off-by: Atharva Raykar <raykar.ath@xxxxxxxxx>
Mentored-by: Christian Couder <christian.couder@xxxxxxxxx>
Mentored-by: Shourya Shukla <periperidip@xxxxxxxxx>
---
git-submodule.sh | 38 ++++++++++++++++++-------------------
t/t7400-submodule-basic.sh | 4 ++--
t/t7406-submodule-update.sh | 10 +++++-----
3 files changed, 26 insertions(+), 26 deletions(-)
diff --git a/git-submodule.sh b/git-submodule.sh
index 4678378424..b887daa8a1 100755
--- a/git-submodule.sh
+++ b/git-submodule.sh
@@ -147,7 +147,7 @@ cmd_add()
if ! git submodule--helper config --check-writeable >/dev/null 2>&1
then
- die "$(eval_gettext "please make sure that the .gitmodules file is in the working tree")"
+ die "$(eval_gettext "fatal: please make sure that the .gitmodules file is in the working tree")"
fi
if test -n "$reference_path"
@@ -176,7 +176,7 @@ cmd_add()
case "$repo" in
./*|../*)
test -z "$wt_prefix" ||
- die "$(gettext "Relative path can only be used from the toplevel of the working tree")"
+ die "$(gettext "fatal: Relative path can only be used from the toplevel of the working tree")"
# dereference source url relative to parent's url
realrepo=$(git submodule--helper resolve-relative-url "$repo") || exit
@@ -186,7 +186,7 @@ cmd_add()
realrepo=$repo
;;
*)
- die "$(eval_gettext "repo URL: '\$repo' must be absolute or begin with ./|../")"
+ die "$(eval_gettext "fatal: repo URL: '\$repo' must be absolute or begin with ./|../")"
;;
esac
@@ -205,17 +205,17 @@ cmd_add()
if test -z "$force"
then
git ls-files --error-unmatch "$sm_path" > /dev/null 2>&1 &&
- die "$(eval_gettext "'\$sm_path' already exists in the index")"
+ die "$(eval_gettext "fatal: '\$sm_path' already exists in the index")"
else
git ls-files -s "$sm_path" | sane_grep -v "^160000" > /dev/null 2>&1 &&
- die "$(eval_gettext "'\$sm_path' already exists in the index and is not a submodule")"
+ die "$(eval_gettext "fatal: '\$sm_path' already exists in the index and is not a submodule")"
fi
if test -d "$sm_path" &&
test -z $(git -C "$sm_path" rev-parse --show-cdup 2>/dev/null)
then
git -C "$sm_path" rev-parse --verify -q HEAD >/dev/null ||
- die "$(eval_gettext "'\$sm_path' does not have a commit checked out")"
+ die "$(eval_gettext "fatal: '\$sm_path' does not have a commit checked out")"
fi
if test -z "$force"
@@ -238,7 +238,7 @@ cmd_add()
if ! git submodule--helper check-name "$sm_name"
then
- die "$(eval_gettext "'$sm_name' is not a valid submodule name")"
+ die "$(eval_gettext "fatal: '$sm_name' is not a valid submodule name")"
fi
# perhaps the path exists and is already a git repo, else clone it
@@ -281,7 +281,7 @@ or you are unsure what this means choose another name with the '--name' option."
git config submodule."$sm_name".url "$realrepo"
git add --no-warn-embedded-repo $force "$sm_path" ||
- die "$(eval_gettext "Failed to add submodule '\$sm_path'")"
+ die "$(eval_gettext "fatal: Failed to add submodule '\$sm_path'")"
git submodule--helper config submodule."$sm_name".path "$sm_path" &&
git submodule--helper config submodule."$sm_name".url "$repo" &&
@@ -290,7 +290,7 @@ or you are unsure what this means choose another name with the '--name' option."
git submodule--helper config submodule."$sm_name".branch "$branch"
fi &&
git add --force .gitmodules ||
- die "$(eval_gettext "Failed to register submodule '\$sm_path'")"
+ die "$(eval_gettext "fatal: Failed to register submodule '\$sm_path'")"
# NEEDSWORK: In a multi-working-tree world, this needs to be
# set in the per-worktree config.
@@ -565,7 +565,7 @@ cmd_update()
else
subsha1=$(sanitize_submodule_env; cd "$sm_path" &&
git rev-parse --verify HEAD) ||
- die "$(eval_gettext "Unable to find current revision in submodule path '\$displaypath'")"
+ die "$(eval_gettext "fatal: Unable to find current revision in submodule path '\$displaypath'")"
fi
if test -n "$remote"
@@ -575,12 +575,12 @@ cmd_update()
then
# Fetch remote before determining tracking $sha1
fetch_in_submodule "$sm_path" $depth ||
- die "$(eval_gettext "Unable to fetch in submodule path '\$sm_path'")"
+ die "$(eval_gettext "fatal: Unable to fetch in submodule path '\$sm_path'")"
fi
remote_name=$(sanitize_submodule_env; cd "$sm_path" && git submodule--helper print-default-remote)
sha1=$(sanitize_submodule_env; cd "$sm_path" &&
git rev-parse --verify "${remote_name}/${branch}") ||
- die "$(eval_gettext "Unable to find current \${remote_name}/\${branch} revision in submodule path '\$sm_path'")"
+ die "$(eval_gettext "fatal: Unable to find current \${remote_name}/\${branch} revision in submodule path '\$sm_path'")"
fi
if test "$subsha1" != "$sha1" || test -n "$force"
@@ -604,36 +604,36 @@ cmd_update()
# not be reachable from any of the refs
is_tip_reachable "$sm_path" "$sha1" ||
fetch_in_submodule "$sm_path" "$depth" "$sha1" ||
- die "$(eval_gettext "Fetched in submodule path '\$displaypath', but it did not contain \$sha1. Direct fetching of that commit failed.")"
+ die "$(eval_gettext "fatal: Fetched in submodule path '\$displaypath', but it did not contain \$sha1. Direct fetching of that commit failed.")"
fi
must_die_on_failure=
case "$update_module" in
checkout)
command="git checkout $subforce -q"
- die_msg="$(eval_gettext "Unable to checkout '\$sha1' in submodule path '\$displaypath'")"
+ die_msg="$(eval_gettext "fatal: Unable to checkout '\$sha1' in submodule path '\$displaypath'")"
say_msg="$(eval_gettext "Submodule path '\$displaypath': checked out '\$sha1'")"
;;
rebase)
command="git rebase ${GIT_QUIET:+--quiet}"
- die_msg="$(eval_gettext "Unable to rebase '\$sha1' in submodule path '\$displaypath'")"
+ die_msg="$(eval_gettext "fatal: Unable to rebase '\$sha1' in submodule path '\$displaypath'")"
say_msg="$(eval_gettext "Submodule path '\$displaypath': rebased into '\$sha1'")"
must_die_on_failure=yes
;;
merge)
command="git merge ${GIT_QUIET:+--quiet}"
- die_msg="$(eval_gettext "Unable to merge '\$sha1' in submodule path '\$displaypath'")"
+ die_msg="$(eval_gettext "fatal: Unable to merge '\$sha1' in submodule path '\$displaypath'")"
say_msg="$(eval_gettext "Submodule path '\$displaypath': merged in '\$sha1'")"
must_die_on_failure=yes
;;
!*)
command="${update_module#!}"
- die_msg="$(eval_gettext "Execution of '\$command \$sha1' failed in submodule path '\$displaypath'")"
+ die_msg="$(eval_gettext "fatal: Execution of '\$command \$sha1' failed in submodule path '\$displaypath'")"
say_msg="$(eval_gettext "Submodule path '\$displaypath': '\$command \$sha1'")"
must_die_on_failure=yes
;;
*)
- die "$(eval_gettext "Invalid update mode '$update_module' for submodule path '$path'")"
+ die "$(eval_gettext "fatal: Invalid update mode '$update_module' for submodule path '$path'")"
esac
if (sanitize_submodule_env; cd "$sm_path" && $command "$sha1")
@@ -660,7 +660,7 @@ cmd_update()
res=$?
if test $res -gt 0
then
- die_msg="$(eval_gettext "Failed to recurse into submodule path '\$displaypath'")"
+ die_msg="$(eval_gettext "fatal: Failed to recurse into submodule path '\$displaypath'")"
if test $res -ne 2
then
err="${err};$die_msg"
diff --git a/t/t7400-submodule-basic.sh b/t/t7400-submodule-basic.sh
index 7aa7fefdfa..cb1b8e35db 100755
--- a/t/t7400-submodule-basic.sh
+++ b/t/t7400-submodule-basic.sh
@@ -51,7 +51,7 @@ test_expect_success 'submodule update aborts on missing gitmodules url' '
test_expect_success 'add aborts on repository with no commits' '
cat >expect <<-\EOF &&
- '"'repo-no-commits'"' does not have a commit checked out
+ fatal: '"'repo-no-commits'"' does not have a commit checked out
EOF
git init repo-no-commits &&
test_must_fail git submodule add ../a ./repo-no-commits 2>actual &&
@@ -199,7 +199,7 @@ test_expect_success 'submodule add to .gitignored path with --force' '
test_expect_success 'submodule add to path with tracked content fails' '
(
cd addtest &&
- echo "'\''dir-tracked'\'' already exists in the index" >expect &&
+ echo "fatal: '\''dir-tracked'\'' already exists in the index" >expect &&
mkdir dir-tracked &&
test_commit foo dir-tracked/bar &&
test_must_fail git submodule add "$submodurl" dir-tracked >actual 2>&1 &&
diff --git a/t/t7406-submodule-update.sh b/t/t7406-submodule-update.sh
index f4f61fe554..11cccbb333 100755
--- a/t/t7406-submodule-update.sh
+++ b/t/t7406-submodule-update.sh
@@ -448,7 +448,7 @@ test_expect_success 'fsck detects command in .gitmodules' '
'
cat << EOF >expect
-Execution of 'false $submodulesha1' failed in submodule path 'submodule'
+fatal: Execution of 'false $submodulesha1' failed in submodule path 'submodule'
EOF
test_expect_success 'submodule update - command in .git/config catches failure' '
@@ -465,7 +465,7 @@ test_expect_success 'submodule update - command in .git/config catches failure'
'
cat << EOF >expect
-Execution of 'false $submodulesha1' failed in submodule path '../submodule'
+fatal: Execution of 'false $submodulesha1' failed in submodule path '../submodule'
EOF
test_expect_success 'submodule update - command in .git/config catches failure -- subdirectory' '
@@ -484,7 +484,7 @@ test_expect_success 'submodule update - command in .git/config catches failure -
test_expect_success 'submodule update - command run for initial population of submodule' '
cat >expect <<-EOF &&
- Execution of '\''false $submodulesha1'\'' failed in submodule path '\''submodule'\''
+ fatal: Execution of '\''false $submodulesha1'\'' failed in submodule path '\''submodule'\''
EOF
rm -rf super/submodule &&
test_must_fail git -C super submodule update 2>actual &&
@@ -493,8 +493,8 @@ test_expect_success 'submodule update - command run for initial population of su
'
cat << EOF >expect
-Execution of 'false $submodulesha1' failed in submodule path '../super/submodule'
-Failed to recurse into submodule path '../super'
+fatal: Execution of 'false $submodulesha1' failed in submodule path '../super/submodule'
+fatal: Failed to recurse into submodule path '../super'
EOF
test_expect_success 'recursive submodule update - command in .git/config catches failure -- subdirectory' '
--
2.32.0
