From: Jeff Hostetler <jeffhost@xxxxxxxxxxxxx>
Signed-off-by: Jeff Hostetler <jeffhost@xxxxxxxxxxxxx>
---
t/t7527-builtin-fsmonitor.sh | 497 +++++++++++++++++++++++++++++++++++
1 file changed, 497 insertions(+)
create mode 100755 t/t7527-builtin-fsmonitor.sh
diff --git a/t/t7527-builtin-fsmonitor.sh b/t/t7527-builtin-fsmonitor.sh
new file mode 100755
index 00000000000..58b56dc9940
--- /dev/null
+++ b/t/t7527-builtin-fsmonitor.sh
@@ -0,0 +1,497 @@
+#!/bin/sh
+
+test_description='built-in file system watcher'
+
+. ./test-lib.sh
+
+if ! test_have_prereq FSMONITOR_DAEMON
+then
+ skip_all="fsmonitor--daemon is not supported on this platform"
+ test_done
+fi
+
+stop_daemon_delete_repo () {
+ r=$1
+ git -C $r fsmonitor--daemon stop >/dev/null 2>/dev/null
+ rm -rf $1
+ return 0
+}
+
+start_daemon () {
+ case "$#" in
+ 1) r="-C $1";;
+ *) r="";
+ esac
+
+ git $r fsmonitor--daemon start || return $?
+ git $r fsmonitor--daemon status || return $?
+
+ return 0
+}
+
+test_expect_success 'explicit daemon start and stop' '
+ test_when_finished "stop_daemon_delete_repo test_explicit" &&
+
+ git init test_explicit &&
+ start_daemon test_explicit &&
+
+ git -C test_explicit fsmonitor--daemon stop &&
+ test_must_fail git -C test_explicit fsmonitor--daemon status
+'
+
+test_expect_success 'implicit daemon start' '
+ test_when_finished "stop_daemon_delete_repo test_implicit" &&
+
+ git init test_implicit &&
+ test_must_fail git -C test_implicit fsmonitor--daemon status &&
+
+ # query will implicitly start the daemon.
+ #
+ # for test-script simplicity, we send a V1 timestamp rather than
+ # a V2 token. either way, the daemon response to any query contains
+ # a new V2 token. (the daemon may complain that we sent a V1 request,
+ # but this test case is only concerned with whether the daemon was
+ # implicitly started.)
+
+ GIT_TRACE2_EVENT="$(pwd)/.git/trace" \
+ test-tool -C test_implicit fsmonitor-client query --token 0 >actual &&
+ nul_to_q <actual >actual.filtered &&
+ grep "builtin:" actual.filtered &&
+
+ # confirm that a daemon was started in the background.
+ #
+ # since the mechanism for starting the background daemon is platform
+ # dependent, just confirm that the foreground command received a
+ # response from the daemon.
+
+ grep :\"query/response-length\" .git/trace &&
+
+ git -C test_implicit fsmonitor--daemon status &&
+ git -C test_implicit fsmonitor--daemon stop &&
+ test_must_fail git -C test_implicit fsmonitor--daemon status
+'
+
+test_expect_success 'implicit daemon stop (delete .git)' '
+ test_when_finished "stop_daemon_delete_repo test_implicit_1" &&
+
+ git init test_implicit_1 &&
+
+ start_daemon test_implicit_1 &&
+
+ # deleting the .git directory will implicitly stop the daemon.
+ rm -rf test_implicit_1/.git &&
+
+ # [1] Create an empty .git directory so that the following Git
+ # command will stay relative to the `-C` directory.
+ #
+ # Without this, the Git command will override the requested
+ # -C argument and crawl out to the containing Git source tree.
+ # This would make the test result dependent upon whether we
+ # were using fsmonitor on our development worktree.
+ #
+ sleep 1 &&
+ mkdir test_implicit_1/.git &&
+
+ test_must_fail git -C test_implicit_1 fsmonitor--daemon status
+'
+
+test_expect_success 'implicit daemon stop (rename .git)' '
+ test_when_finished "stop_daemon_delete_repo test_implicit_2" &&
+
+ git init test_implicit_2 &&
+
+ start_daemon test_implicit_2 &&
+
+ # renaming the .git directory will implicitly stop the daemon.
+ mv test_implicit_2/.git test_implicit_2/.xxx &&
+
+ # See [1] above.
+ #
+ sleep 1 &&
+ mkdir test_implicit_2/.git &&
+
+ test_must_fail git -C test_implicit_2 fsmonitor--daemon status
+'
+
+test_expect_success 'cannot start multiple daemons' '
+ test_when_finished "stop_daemon_delete_repo test_multiple" &&
+
+ git init test_multiple &&
+
+ start_daemon test_multiple &&
+
+ test_must_fail git -C test_multiple fsmonitor--daemon start 2>actual &&
+ grep "fsmonitor--daemon is already running" actual &&
+
+ git -C test_multiple fsmonitor--daemon stop &&
+ test_must_fail git -C test_multiple fsmonitor--daemon status
+'
+
+# These tests use the main repo in the trash directory
+
+test_expect_success 'setup' '
+ >tracked &&
+ >modified &&
+ >delete &&
+ >rename &&
+ mkdir dir1 &&
+ >dir1/tracked &&
+ >dir1/modified &&
+ >dir1/delete &&
+ >dir1/rename &&
+ mkdir dir2 &&
+ >dir2/tracked &&
+ >dir2/modified &&
+ >dir2/delete &&
+ >dir2/rename &&
+ mkdir dirtorename &&
+ >dirtorename/a &&
+ >dirtorename/b &&
+
+ cat >.gitignore <<-\EOF &&
+ .gitignore
+ expect*
+ actual*
+ EOF
+
+ git -c core.useBuiltinFSMonitor= add . &&
+ test_tick &&
+ git -c core.useBuiltinFSMonitor= commit -m initial &&
+
+ git config core.useBuiltinFSMonitor true
+'
+
+# The test already explicitly stopped (or tried to stop) the daemon.
+# This is here in case something else fails first.
+#
+redundant_stop_daemon () {
+ git fsmonitor--daemon stop
+ return 0
+}
+
+test_expect_success 'update-index implicitly starts daemon' '
+ test_when_finished redundant_stop_daemon &&
+
+ test_must_fail git fsmonitor--daemon status &&
+
+ GIT_TRACE2_EVENT="$(pwd)/.git/trace_implicit_1" \
+ git update-index --fsmonitor &&
+
+ git fsmonitor--daemon status &&
+ test_might_fail git fsmonitor--daemon stop &&
+
+ grep \"event\":\"start\".*\"fsmonitor--daemon\" .git/trace_implicit_1
+'
+
+test_expect_success 'status implicitly starts daemon' '
+ test_when_finished redundant_stop_daemon &&
+
+ test_must_fail git fsmonitor--daemon status &&
+
+ GIT_TRACE2_EVENT="$(pwd)/.git/trace_implicit_2" \
+ git status >actual &&
+
+ git fsmonitor--daemon status &&
+ test_might_fail git fsmonitor--daemon stop &&
+
+ grep \"event\":\"start\".*\"fsmonitor--daemon\" .git/trace_implicit_2
+'
+
+edit_files() {
+ echo 1 >modified
+ echo 2 >dir1/modified
+ echo 3 >dir2/modified
+ >dir1/untracked
+}
+
+delete_files() {
+ rm -f delete
+ rm -f dir1/delete
+ rm -f dir2/delete
+}
+
+create_files() {
+ echo 1 >new
+ echo 2 >dir1/new
+ echo 3 >dir2/new
+}
+
+rename_files() {
+ mv rename renamed
+ mv dir1/rename dir1/renamed
+ mv dir2/rename dir2/renamed
+}
+
+file_to_directory() {
+ rm -f delete
+ mkdir delete
+ echo 1 >delete/new
+}
+
+directory_to_file() {
+ rm -rf dir1
+ echo 1 >dir1
+}
+
+verify_status() {
+ git status >actual &&
+ GIT_INDEX_FILE=.git/fresh-index git read-tree master &&
+ GIT_INDEX_FILE=.git/fresh-index git -c core.useBuiltinFSMonitor= status >expect &&
+ test_cmp expect actual &&
+ echo HELLO AFTER &&
+ cat .git/trace &&
+ echo HELLO AFTER
+}
+
+# The next few test cases confirm that our fsmonitor daemon sees each type
+# of OS filesystem notification that we care about. At this layer we just
+# ensure we are getting the OS notifications and do not try to confirm what
+# is reported by `git status`.
+#
+# We run a simple query after modifying the filesystem just to introduce
+# a bit of a delay so that the trace logging from the daemon has time to
+# get flushed to disk.
+#
+# We `reset` and `clean` at the bottom of each test (and before stopping the
+# daemon) because these commands might implicitly restart the daemon.
+
+clean_up_repo_and_stop_daemon () {
+ git reset --hard HEAD
+ git clean -fd
+ git fsmonitor--daemon stop
+ rm -f .git/trace
+}
+
+test_expect_success 'edit some files' '
+ test_when_finished clean_up_repo_and_stop_daemon &&
+
+ (
+ GIT_TRACE_FSMONITOR="$(pwd)/.git/trace" &&
+ export GIT_TRACE_FSMONITOR &&
+
+ start_daemon
+ ) &&
+
+ edit_files &&
+
+ test-tool fsmonitor-client query --token 0 >/dev/null 2>&1 &&
+
+ grep "^event: dir1/modified$" .git/trace &&
+ grep "^event: dir2/modified$" .git/trace &&
+ grep "^event: modified$" .git/trace &&
+ grep "^event: dir1/untracked$" .git/trace
+'
+
+test_expect_success 'create some files' '
+ test_when_finished clean_up_repo_and_stop_daemon &&
+
+ (
+ GIT_TRACE_FSMONITOR="$(pwd)/.git/trace" &&
+ export GIT_TRACE_FSMONITOR &&
+
+ start_daemon
+ ) &&
+
+ create_files &&
+
+ test-tool fsmonitor-client query --token 0 >/dev/null 2>&1 &&
+
+ grep "^event: dir1/new$" .git/trace &&
+ grep "^event: dir2/new$" .git/trace &&
+ grep "^event: new$" .git/trace
+'
+
+test_expect_success 'delete some files' '
+ test_when_finished clean_up_repo_and_stop_daemon &&
+
+ (
+ GIT_TRACE_FSMONITOR="$(pwd)/.git/trace" &&
+ export GIT_TRACE_FSMONITOR &&
+
+ start_daemon
+ ) &&
+
+ delete_files &&
+
+ test-tool fsmonitor-client query --token 0 >/dev/null 2>&1 &&
+
+ grep "^event: dir1/delete$" .git/trace &&
+ grep "^event: dir2/delete$" .git/trace &&
+ grep "^event: delete$" .git/trace
+'
+
+test_expect_success 'rename some files' '
+ test_when_finished clean_up_repo_and_stop_daemon &&
+
+ (
+ GIT_TRACE_FSMONITOR="$(pwd)/.git/trace" &&
+ export GIT_TRACE_FSMONITOR &&
+
+ start_daemon
+ ) &&
+
+ rename_files &&
+
+ test-tool fsmonitor-client query --token 0 >/dev/null 2>&1 &&
+
+ grep "^event: dir1/rename$" .git/trace &&
+ grep "^event: dir2/rename$" .git/trace &&
+ grep "^event: rename$" .git/trace &&
+ grep "^event: dir1/renamed$" .git/trace &&
+ grep "^event: dir2/renamed$" .git/trace &&
+ grep "^event: renamed$" .git/trace
+'
+
+test_expect_success 'rename directory' '
+ test_when_finished clean_up_repo_and_stop_daemon &&
+
+ (
+ GIT_TRACE_FSMONITOR="$(pwd)/.git/trace" &&
+ export GIT_TRACE_FSMONITOR &&
+
+ start_daemon
+ ) &&
+
+ mv dirtorename dirrenamed &&
+
+ test-tool fsmonitor-client query --token 0 >/dev/null 2>&1 &&
+
+ grep "^event: dirtorename/*$" .git/trace &&
+ grep "^event: dirrenamed/*$" .git/trace
+'
+
+test_expect_success 'file changes to directory' '
+ test_when_finished clean_up_repo_and_stop_daemon &&
+
+ (
+ GIT_TRACE_FSMONITOR="$(pwd)/.git/trace" &&
+ export GIT_TRACE_FSMONITOR &&
+
+ start_daemon
+ ) &&
+
+ file_to_directory &&
+
+ test-tool fsmonitor-client query --token 0 >/dev/null 2>&1 &&
+
+ grep "^event: delete$" .git/trace &&
+ grep "^event: delete/new$" .git/trace
+'
+
+test_expect_success 'directory changes to a file' '
+ test_when_finished clean_up_repo_and_stop_daemon &&
+
+ (
+ GIT_TRACE_FSMONITOR="$(pwd)/.git/trace" &&
+ export GIT_TRACE_FSMONITOR &&
+
+ start_daemon
+ ) &&
+
+ directory_to_file &&
+
+ test-tool fsmonitor-client query --token 0 >/dev/null 2>&1 &&
+
+ grep "^event: dir1$" .git/trace
+'
+
+# The next few test cases exercise the token-resync code. When filesystem
+# drops events (because of filesystem velocity or because the daemon isn't
+# polling fast enough), we need to discard the cached data (relative to the
+# current token) and start collecting events under a new token.
+#
+# the 'test-tool fsmonitor-client flush' command can be used to send a
+# "flush" message to a running daemon and ask it to do a flush/resync.
+
+test_expect_success 'flush cached data' '
+ test_when_finished "stop_daemon_delete_repo test_flush" &&
+
+ git init test_flush &&
+
+ (
+ GIT_TEST_FSMONITOR_TOKEN=true &&
+ export GIT_TEST_FSMONITOR_TOKEN &&
+
+ GIT_TRACE_FSMONITOR="$(pwd)/.git/trace_daemon" &&
+ export GIT_TRACE_FSMONITOR &&
+
+ start_daemon test_flush
+ ) &&
+
+ # The daemon should have an initial token with no events in _0 and
+ # then a few (probably platform-specific number of) events in _1.
+ # These should both have the same <token_id>.
+
+ test-tool -C test_flush fsmonitor-client query --token "builtin:test_00000001:0" >actual_0 &&
+ nul_to_q <actual_0 >actual_q0 &&
+
+ touch test_flush/file_1 &&
+ touch test_flush/file_2 &&
+
+ test-tool -C test_flush fsmonitor-client query --token "builtin:test_00000001:0" >actual_1 &&
+ nul_to_q <actual_1 >actual_q1 &&
+
+ grep "file_1" actual_q1 &&
+
+ # Force a flush. This will change the <token_id>, reset the <seq_nr>, and
+ # flush the file data. Then create some events and ensure that the file
+ # again appears in the cache. It should have the new <token_id>.
+
+ test-tool -C test_flush fsmonitor-client flush >flush_0 &&
+ nul_to_q <flush_0 >flush_q0 &&
+ grep "^builtin:test_00000002:0Q/Q$" flush_q0 &&
+
+ test-tool -C test_flush fsmonitor-client query --token "builtin:test_00000002:0" >actual_2 &&
+ nul_to_q <actual_2 >actual_q2 &&
+
+ grep "^builtin:test_00000002:0Q$" actual_q2 &&
+
+ touch test_flush/file_3 &&
+
+ test-tool -C test_flush fsmonitor-client query --token "builtin:test_00000002:0" >actual_3 &&
+ nul_to_q <actual_3 >actual_q3 &&
+
+ grep "file_3" actual_q3
+'
+
+# The next few test cases create repos where the .git directory is NOT
+# inside the one of the working directory. That is, where .git is a file
+# that points to a directory elsewhere. This happens for submodules and
+# non-primary worktrees.
+
+test_expect_success 'setup worktree base' '
+ git init wt-base &&
+ echo 1 >wt-base/file1 &&
+ git -C wt-base add file1 &&
+ git -C wt-base commit -m "c1"
+'
+
+test_expect_success 'worktree with .git file' '
+ git -C wt-base worktree add ../wt-secondary &&
+
+ (
+ GIT_TRACE2_PERF="$(pwd)/trace2_wt_secondary" &&
+ export GIT_TRACE2_PERF &&
+
+ GIT_TRACE_FSMONITOR="$(pwd)/trace_wt_secondary" &&
+ export GIT_TRACE_FSMONITOR &&
+
+ start_daemon wt-secondary
+ ) &&
+
+ git -C wt-secondary fsmonitor--daemon stop &&
+ test_must_fail git -C wt-secondary fsmonitor--daemon status
+'
+
+# NEEDSWORK: Repeat one of the "edit" tests on wt-secondary and
+# confirm that we get the same events and behavior -- that is, that
+# fsmonitor--daemon correctly watches BOTH the working directory and
+# the external GITDIR directory and behaves the same as when ".git"
+# is a directory inside the working directory.
+
+test_expect_success 'cleanup worktrees' '
+ stop_daemon_delete_repo wt-secondary &&
+ stop_daemon_delete_repo wt-base
+'
+
+test_done
--
gitgitgadget
