When git-p4 reads the output from a p4 command, it assumes it will be
100% UTF-8. If even one character in the output of one p4 command is
not UTF-8, git-p4 crashes with:
File "C:/Program Files/Git/bin/git-p4.py", line 774, in p4CmdList
value = value.decode() UnicodeDecodeError: 'utf-8' codec can't
decode byte Ox93 in position 42: invalid start byte
This is especially a problem for the "git p4 clone ... @all" command,
where git-p4 needs to read thousands of changeset descriptions, one of
which may have a stray smart quote, causing the whole clone operation
to fail.
Add a new config setting, allowing git-p4 to try a fallback encoding
(for example, "cp1252") and/or use the Unicode replacement character,
to prevent the whole program from crashing on such a minor problem.
Signed-off-by: Tzadik Vanderhoof <tzadik.vanderhoof@xxxxxxxxx>
---
Documentation/git-p4.txt | 9 +++
git-p4.py | 11 ++-
t/t9835-git-p4-config-fallback-encoding.sh | 87 ++++++++++++++++++++++
3 files changed, 106 insertions(+), 1 deletion(-)
create mode 100755 t/t9835-git-p4-config-fallback-encoding.sh
diff --git a/Documentation/git-p4.txt b/Documentation/git-p4.txt
index f89e68b424..86d3ffa644 100644
--- a/Documentation/git-p4.txt
+++ b/Documentation/git-p4.txt
@@ -638,6 +638,15 @@ git-p4.pathEncoding::
to transcode the paths to UTF-8. As an example, Perforce on Windows
often uses "cp1252" to encode path names.
+git-p4.fallbackEncoding::
+ Perforce changeset descriptions can be stored in any encoding.
+ Git-p4 first tries to interpret each description as UTF-8. If that
+ fails, this config allows another encoding to be tried. You can specify,
+ for example, "cp1252". If git-p4.fallbackEncoding is "replace", UTF-8 will
+ be used, with invalid UTF-8 characters replaced by the Unicode replacement
+ character. The default is "none": there is no fallback, and any non UTF-8
+ character will cause git-p4 to immediately fail.
+
git-p4.largeFileSystem::
Specify the system that is used for large (binary) files. Please note
that large file systems do not support the 'git p4 submit' command.
diff --git a/git-p4.py b/git-p4.py
index 09c9e93ac4..202fb01bdf 100755
--- a/git-p4.py
+++ b/git-p4.py
@@ -771,7 +771,16 @@ def p4CmdList(cmd, stdin=None, stdin_mode='w+b', cb=None, skip_info=False,
for key, value in entry.items():
key = key.decode()
if isinstance(value, bytes) and not (key in ('data', 'path', 'clientFile') or key.startswith('depotFile')):
- value = value.decode()
+ try:
+ value = value.decode()
+ except UnicodeDecodeError:
+ fallbackEncoding = gitConfig("git-p4.fallbackEncoding").lower() or 'none'
+ if fallbackEncoding == 'none':
+ raise Exception("UTF-8 decoding failed. Consider using git config git-p4.fallbackEncoding")
+ elif fallbackEncoding == 'replace':
+ value = value.decode(errors='replace')
+ else:
+ value = value.decode(encoding=fallbackEncoding)
decoded_entry[key] = value
# Parse out data if it's an error response
if decoded_entry.get('code') == 'error' and 'data' in decoded_entry:
diff --git a/t/t9835-git-p4-config-fallback-encoding.sh b/t/t9835-git-p4-config-fallback-encoding.sh
new file mode 100755
index 0000000000..383507803e
--- /dev/null
+++ b/t/t9835-git-p4-config-fallback-encoding.sh
@@ -0,0 +1,87 @@
+#!/bin/sh
+
+test_description='test git-p4.fallbackEncoding config'
+
+GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main
+export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
+
+. ./lib-git-p4.sh
+
+test_expect_success 'start p4d' '
+ start_p4d
+'
+
+test_expect_success 'add Unicode description' '
+ cd "$cli" &&
+ echo file1 >file1 &&
+ p4 add file1 &&
+ p4 submit -d documentación
+'
+
+# Unicode descriptions cause clone to throw in some environments. This test
+# determines if that is the case in our environment. If so we create a file called "clone_fails".
+# We check that file to in subsequent tests to determine what behavior to expect.
+
+clone_fails="$TRASH_DIRECTORY/clone_fails"
+
+test_expect_success 'clone with git-p4.fallbackEncoding unset' '
+ test_might_fail git config --global --unset git-p4.fallbackEncoding &&
+ test_when_finished cleanup_git && {
+ git p4 clone --dest="$git" //depot@all 2>error || (
+ cp /dev/null "$clone_fails" &&
+ grep "UTF-8 decoding failed. Consider using git config git-p4.fallbackEncoding" error
+ )
+ }
+'
+
+test_expect_success 'clone with git-p4.fallbackEncoding set to "none"' '
+ git config --global git-p4.fallbackEncoding none &&
+ test_when_finished cleanup_git && {
+ (
+ test -f "$clone_fails" &&
+ test_must_fail git p4 clone --dest="$git" //depot@all 2>error &&
+ grep "UTF-8 decoding failed. Consider using git config git-p4.fallbackEncoding" error
+ ) ||
+ (
+ ! test -f "$clone_fails" &&
+ git p4 clone --dest="$git" //depot@all 2>error
+ )
+ }
+'
+
+test_expect_success 'clone with git-p4.fallbackEncoding set to "cp1252"' '
+ git config --global git-p4.fallbackEncoding cp1252 &&
+ test_when_finished cleanup_git &&
+ (
+ git p4 clone --dest="$git" //depot@all &&
+ cd "$git" &&
+ git log --oneline >log &&
+ desc=$(head -1 log | cut -d" " -f2) &&
+ test "$desc" = "documentación"
+ )
+'
+
+test_expect_success 'clone with git-p4.fallbackEncoding set to "replace"' '
+ git config --global git-p4.fallbackEncoding replace &&
+ test_when_finished cleanup_git &&
+ (
+ git p4 clone --dest="$git" //depot@all &&
+ cd "$git" &&
+ git log --oneline >log &&
+ desc=$(head -1 log | cut -d" " -f2) &&
+ {
+ (test -f "$clone_fails" &&
+ test "$desc" = "documentaci�n"
+ ) ||
+ (! test -f "$clone_fails" &&
+ test "$desc" = "documentación"
+ )
+ }
+ )
+'
+
+test_expect_success 'unset git-p4.fallbackEncoding' '
+ git config --global --unset git-p4.fallbackEncoding
+'
+
+test_done
--
2.31.1
