[PATCH v5 17/21] sparse-checkout: toggle sparse index from builtin

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Derrick Stolee <dstolee@xxxxxxxxxxxxx>

The sparse index extension is used to signal that index writes should be
in sparse mode. This was only updated using GIT_TEST_SPARSE_INDEX=1.

Add a '--[no-]sparse-index' option to 'git sparse-checkout init' that
specifies if the sparse index should be used. It also updates the index
to use the correct format, either way. Add a warning in the
documentation that the use of a repository extension might reduce
compatibility with third-party tools. 'git sparse-checkout init' already
sets extension.worktreeConfig, which places most sparse-checkout users
outside of the scope of most third-party tools.

Update t1092-sparse-checkout-compatibility.sh to use this CLI instead of
GIT_TEST_SPARSE_INDEX=1.

Signed-off-by: Derrick Stolee <dstolee@xxxxxxxxxxxxx>
---
 Documentation/git-sparse-checkout.txt    | 14 +++++++
 builtin/sparse-checkout.c                | 17 ++++++++-
 sparse-index.c                           | 33 +++++++++++------
 sparse-index.h                           |  3 ++
 t/t1092-sparse-checkout-compatibility.sh | 47 +++++++++++++-----------
 5 files changed, 80 insertions(+), 34 deletions(-)

diff --git a/Documentation/git-sparse-checkout.txt b/Documentation/git-sparse-checkout.txt
index a0eeaeb02ee3..fdcf43f87cb3 100644
--- a/Documentation/git-sparse-checkout.txt
+++ b/Documentation/git-sparse-checkout.txt
@@ -45,6 +45,20 @@ To avoid interfering with other worktrees, it first enables the
 When `--cone` is provided, the `core.sparseCheckoutCone` setting is
 also set, allowing for better performance with a limited set of
 patterns (see 'CONE PATTERN SET' below).
++
+Use the `--[no-]sparse-index` option to toggle the use of the sparse
+index format. This reduces the size of the index to be more closely
+aligned with your sparse-checkout definition. This can have significant
+performance advantages for commands such as `git status` or `git add`.
+This feature is still experimental. Some commands might be slower with
+a sparse index until they are properly integrated with the feature.
++
+**WARNING:** Using a sparse index requires modifying the index in a way
+that is not completely understood by external tools. If you have trouble
+with this compatibility, then run `git sparse-checkout init --no-sparse-index`
+to rewrite your index to not be sparse. Older versions of Git will not
+understand the sparse directory entries index extension and may fail to
+interact with your repository until it is disabled.
 
 'set'::
 	Write a set of patterns to the sparse-checkout file, as given as
diff --git a/builtin/sparse-checkout.c b/builtin/sparse-checkout.c
index e00b82af727b..ca63e2c64e95 100644
--- a/builtin/sparse-checkout.c
+++ b/builtin/sparse-checkout.c
@@ -14,6 +14,7 @@
 #include "unpack-trees.h"
 #include "wt-status.h"
 #include "quote.h"
+#include "sparse-index.h"
 
 static const char *empty_base = "";
 
@@ -283,12 +284,13 @@ static int set_config(enum sparse_checkout_mode mode)
 }
 
 static char const * const builtin_sparse_checkout_init_usage[] = {
-	N_("git sparse-checkout init [--cone]"),
+	N_("git sparse-checkout init [--cone] [--[no-]sparse-index]"),
 	NULL
 };
 
 static struct sparse_checkout_init_opts {
 	int cone_mode;
+	int sparse_index;
 } init_opts;
 
 static int sparse_checkout_init(int argc, const char **argv)
@@ -303,11 +305,15 @@ static int sparse_checkout_init(int argc, const char **argv)
 	static struct option builtin_sparse_checkout_init_options[] = {
 		OPT_BOOL(0, "cone", &init_opts.cone_mode,
 			 N_("initialize the sparse-checkout in cone mode")),
+		OPT_BOOL(0, "sparse-index", &init_opts.sparse_index,
+			 N_("toggle the use of a sparse index")),
 		OPT_END(),
 	};
 
 	repo_read_index(the_repository);
 
+	init_opts.sparse_index = -1;
+
 	argc = parse_options(argc, argv, NULL,
 			     builtin_sparse_checkout_init_options,
 			     builtin_sparse_checkout_init_usage, 0);
@@ -326,6 +332,15 @@ static int sparse_checkout_init(int argc, const char **argv)
 	sparse_filename = get_sparse_checkout_filename();
 	res = add_patterns_from_file_to_list(sparse_filename, "", 0, &pl, NULL);
 
+	if (init_opts.sparse_index >= 0) {
+		if (set_sparse_index_config(the_repository, init_opts.sparse_index) < 0)
+			die(_("failed to modify sparse-index config"));
+
+		/* force an index rewrite */
+		repo_read_index(the_repository);
+		the_repository->index->updated_workdir = 1;
+	}
+
 	/* If we already have a sparse-checkout file, use it. */
 	if (res >= 0) {
 		free(sparse_filename);
diff --git a/sparse-index.c b/sparse-index.c
index 6f4d95d35b1e..4c73772c6d6c 100644
--- a/sparse-index.c
+++ b/sparse-index.c
@@ -102,21 +102,32 @@ static int convert_to_sparse_rec(struct index_state *istate,
 	return num_converted - start_converted;
 }
 
-static int enable_sparse_index(struct repository *repo)
+static int set_index_sparse_config(struct repository *repo, int enable)
 {
-	const char *config_path = repo_git_path(repo, "config.worktree");
-
-	git_config_set_in_file_gently(config_path,
-				      "index.sparse",
-				      "true");
+	int res;
+	char *config_path = repo_git_path(repo, "config.worktree");
+	res = git_config_set_in_file_gently(config_path,
+					    "index.sparse",
+					    enable ? "true" : NULL);
+	free(config_path);
 
 	prepare_repo_settings(repo);
 	repo->settings.sparse_index = 1;
-	return 0;
+	return res;
+}
+
+int set_sparse_index_config(struct repository *repo, int enable)
+{
+	int res = set_index_sparse_config(repo, enable);
+
+	prepare_repo_settings(repo);
+	repo->settings.sparse_index = enable;
+	return res;
 }
 
 int convert_to_sparse(struct index_state *istate)
 {
+	int test_env;
 	if (istate->split_index || istate->sparse_index ||
 	    !core_apply_sparse_checkout || !core_sparse_checkout_cone)
 		return 0;
@@ -128,11 +139,9 @@ int convert_to_sparse(struct index_state *istate)
 	 * The GIT_TEST_SPARSE_INDEX environment variable triggers the
 	 * index.sparse config variable to be on.
 	 */
-	if (git_env_bool("GIT_TEST_SPARSE_INDEX", 0)) {
-		int err = enable_sparse_index(istate->repo);
-		if (err < 0)
-			return err;
-	}
+	test_env = git_env_bool("GIT_TEST_SPARSE_INDEX", -1);
+	if (test_env >= 0)
+		set_sparse_index_config(istate->repo, test_env);
 
 	/*
 	 * Only convert to sparse if index.sparse is set.
diff --git a/sparse-index.h b/sparse-index.h
index 64380e121d80..39dcc859735e 100644
--- a/sparse-index.h
+++ b/sparse-index.h
@@ -5,4 +5,7 @@ struct index_state;
 void ensure_full_index(struct index_state *istate);
 int convert_to_sparse(struct index_state *istate);
 
+struct repository;
+int set_sparse_index_config(struct repository *repo, int enable);
+
 #endif
diff --git a/t/t1092-sparse-checkout-compatibility.sh b/t/t1092-sparse-checkout-compatibility.sh
index 47f983217852..472c5337de1b 100755
--- a/t/t1092-sparse-checkout-compatibility.sh
+++ b/t/t1092-sparse-checkout-compatibility.sh
@@ -6,6 +6,7 @@ test_description='compare full workdir to sparse workdir'
 # So, disable the check until that integration is complete.
 GIT_TEST_CHECK_CACHE_TREE=0
 GIT_TEST_SPLIT_INDEX=0
+GIT_TEST_SPARSE_INDEX=
 
 . ./test-lib.sh
 
@@ -100,25 +101,26 @@ init_repos () {
 	# initialize sparse-checkout definitions
 	git -C sparse-checkout sparse-checkout init --cone &&
 	git -C sparse-checkout sparse-checkout set deep &&
-	GIT_TEST_SPARSE_INDEX=1 git -C sparse-index sparse-checkout init --cone &&
-	GIT_TEST_SPARSE_INDEX=1 git -C sparse-index sparse-checkout set deep
+	git -C sparse-index sparse-checkout init --cone --sparse-index &&
+	test_cmp_config -C sparse-index true index.sparse &&
+	git -C sparse-index sparse-checkout set deep
 }
 
 run_on_sparse () {
 	(
 		cd sparse-checkout &&
-		GIT_TEST_SPARSE_INDEX=0 "$@" >../sparse-checkout-out 2>../sparse-checkout-err
+		"$@" >../sparse-checkout-out 2>../sparse-checkout-err
 	) &&
 	(
 		cd sparse-index &&
-		GIT_TEST_SPARSE_INDEX=1 "$@" >../sparse-index-out 2>../sparse-index-err
+		"$@" >../sparse-index-out 2>../sparse-index-err
 	)
 }
 
 run_on_all () {
 	(
 		cd full-checkout &&
-		GIT_TEST_SPARSE_INDEX=0 "$@" >../full-checkout-out 2>../full-checkout-err
+		"$@" >../full-checkout-out 2>../full-checkout-err
 	) &&
 	run_on_sparse "$@"
 }
@@ -148,7 +150,7 @@ test_expect_success 'sparse-index contents' '
 			|| return 1
 	done &&
 
-	GIT_TEST_SPARSE_INDEX=1 git -C sparse-index sparse-checkout set folder1 &&
+	git -C sparse-index sparse-checkout set folder1 &&
 
 	test-tool -C sparse-index read-cache --table >cache &&
 	for dir in deep folder2 x
@@ -158,7 +160,7 @@ test_expect_success 'sparse-index contents' '
 			|| return 1
 	done &&
 
-	GIT_TEST_SPARSE_INDEX=1 git -C sparse-index sparse-checkout set deep/deeper1 &&
+	git -C sparse-index sparse-checkout set deep/deeper1 &&
 
 	test-tool -C sparse-index read-cache --table >cache &&
 	for dir in deep/deeper2 folder1 folder2 x
@@ -166,7 +168,14 @@ test_expect_success 'sparse-index contents' '
 		TREE=$(git -C sparse-index rev-parse HEAD:$dir) &&
 		grep "040000 tree $TREE	$dir/" cache \
 			|| return 1
-	done
+	done &&
+
+	# Disabling the sparse-index removes tree entries with full ones
+	git -C sparse-index sparse-checkout init --no-sparse-index &&
+
+	test-tool -C sparse-index read-cache --table >cache &&
+	! grep "040000 tree" cache &&
+	test_sparse_match test-tool read-cache --table
 '
 
 test_expect_success 'expanded in-memory index matches full index' '
@@ -396,19 +405,15 @@ test_expect_success 'submodule handling' '
 test_expect_success 'sparse-index is expanded and converted back' '
 	init_repos &&
 
-	(
-		GIT_TEST_SPARSE_INDEX=1 &&
-		export GIT_TEST_SPARSE_INDEX &&
-		GIT_TRACE2_EVENT="$(pwd)/trace2.txt" GIT_TRACE2_EVENT_NESTING=10 \
-			git -C sparse-index -c core.fsmonitor="" reset --hard &&
-		test_region index convert_to_sparse trace2.txt &&
-		test_region index ensure_full_index trace2.txt &&
-
-		rm trace2.txt &&
-		GIT_TRACE2_EVENT="$(pwd)/trace2.txt" GIT_TRACE2_EVENT_NESTING=10 \
-			git -C sparse-index -c core.fsmonitor="" status -uno &&
-		test_region index ensure_full_index trace2.txt
-	)
+	GIT_TRACE2_EVENT="$(pwd)/trace2.txt" GIT_TRACE2_EVENT_NESTING=10 \
+		git -C sparse-index -c core.fsmonitor="" reset --hard &&
+	test_region index convert_to_sparse trace2.txt &&
+	test_region index ensure_full_index trace2.txt &&
+
+	rm trace2.txt &&
+	GIT_TRACE2_EVENT="$(pwd)/trace2.txt" GIT_TRACE2_EVENT_NESTING=10 \
+		git -C sparse-index -c core.fsmonitor="" status -uno &&
+	test_region index ensure_full_index trace2.txt
 '
 
 test_done
-- 
gitgitgadget




[Index of Archives]     [Linux Kernel Development]     [Gcc Help]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [V4L]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]     [Fedora Users]

  Powered by Linux