On Thu, Mar 04 2021, Elijah Newren wrote:
> Hi Ævar,
>
> On Thu, Mar 4, 2021 at 8:28 AM Ævar Arnfjörð Bjarmason <avarab@xxxxxxxxx> wrote:
>>
>> On Fri, Jan 01 2021, Elijah Newren via GitGitGadget wrote:
>>
>> > + else {
>> > + /* must be the 100644/100755 case */
>> > + assert(S_ISREG(a->mode));
>> > + result->mode = a->mode;
>> > + clean = (b->mode == o->mode);
>> > + /*
>> > + * FIXME: If opt->priv->call_depth && !clean, then we really
>> > + * should not make result->mode match either a->mode or
>> > + * b->mode; that causes t6036 "check conflicting mode for
>> > + * regular file" to fail. It would be best to use some other
>> > + * mode, but we'll confuse all kinds of stuff if we use one
>> > + * where S_ISREG(result->mode) isn't true, and if we use
>> > + * something like 0100666, then tree-walk.c's calls to
>> > + * canon_mode() will just normalize that to 100644 for us and
>> > + * thus not solve anything.
>> > + *
>> > + * Figure out if there's some kind of way we can work around
>> > + * this...
>> > + */
>>
>> So if tree-walk.c didn't call canon_mode() you would do:
>>
>> if (opt->priv->call_depth && !clean)
>> result->mode = 0100666;
>> else
>> result->mode = a->mode;
>>
>> I haven't looked at this bit closer, but that doesn't make the test
>> referenced here pass.
>>
>> I'm refactoring tree-walk.h to do that in a WIP series, and ran into
>> this.
>
> Interesting. Yeah, there might be more steps to make that particular
> test work, but I couldn't go any further due to canon_mode(). It's a
> testcase that has always failed under merge-recursive, and which I was
> resigned to always have fail under merge-ort too; I suspect it's
> enough of a corner case that no one but me ever really cared before.
> (And I didn't hit it in the wild or know anyone that did, I just
> learned of it by trying to clean up merge-recursive.)
I'll send those patches out sooner than later, but as a quick question,
for merges / writing new files to the index/trees etc. we basically:
1. sanitize the mode with canon_mode()
2. write it to a new object, either index or TREE object
I've been trying to refactor things so those things have canon_mode() as
close to the time of writing as possible.
Well, mostly to replace the whole S_*(mode) macros all over the place
with checks against "enum object_type", which is what most of it wants
anyway.
Do you think the merge logic generally wants to operate on the "raw"
mode bits (including what may not even pass fsck checks), or the
sanitized canon_mode()?
>> As an aside, how does one run the merge-ort tests in such a way as
>> they'll pass on master now? There's now a bunch of failures with
>> GIT_TEST_MERGE_ALGORITHM=ort, well, just for t*merge*.sh:
>>
>> t6409-merge-subtree.sh (Wstat: 256 Tests: 12 Failed: 1)
>> Failed test: 12
>> Non-zero exit status: 1
>> t6418-merge-text-auto.sh (Wstat: 256 Tests: 10 Failed: 3)
>> Failed tests: 4-5, 10
>> Non-zero exit status: 1
>> t6437-submodule-merge.sh (Wstat: 0 Tests: 18 Failed: 0)
>> TODO passed: 13, 17
>> t6423-merge-rename-directories.sh (Wstat: 256 Tests: 68 Failed: 4)
>> Failed tests: 7, 53, 55, 59
>> Non-zero exit status: 1
>
> Right, I've been sending merge-ort upstream as fast as possible since
> last September or so, but there's only so much reviewer bandwidth so
> I've been forced to hold back on dozens of patches.
>
> Currently there are 8 test failures (all shown in your output here --
> 1 in t6409, 3 in t6418, and 4 in t6423), and 12 TODO passed (only two
> of which you show here). I was forced to switch my ordering of
> sending patches upstream late last year due to an intern project that
> was planned to do significant work within diffcore-rename; I was
> worried about major conflicts, so I needed to get the diffcore-rename
> changes upstream earlier. That's still in-process.
>
> By the way, if you'd like to help accelerate the merge-ort work; it's
> almost entirely review bound.
> https://lore.kernel.org/git/pull.845.git.1614484707.gitgitgadget@xxxxxxxxx/
> still has no comments, then I have optimization series 10-14 to send
> (viewable up at
> https://github.com/gitgitgadget/git/pulls?q=is%3Apr+author%3Anewren+Optimization+batch),
> then I have other fixes -- mostly for the testsuite (viewable at
> https://github.com/newren/git/tree/ort-remainder), then I need to fix
> up the TODO passed submodule tests. Due to how the submodule testing
> framework functions, I can't just make a simple
> s/test_expect_failure/test_expect_success/ -- the tests are structured
> a bit funny and the tests are themselves buggy in some cases. I
> talked with jrnieder about it a little bit, just need to spend more
> time on it. But it hasn't been critical because the rest of the code
> was so far away from finally landing anyway. Finally, and optionally,
> comes the --remerge-diff and --remerge-diff-only options to log/show
> (viewable at https://github.com/newren/git/tree/remerge-diff, but
> these patches need to both be cleaned up and rebased on
> ort-remainder).
Maybe something like this with a bit of test prereq sprinkle on top? :)
diff --git a/t/t6423-merge-rename-directories-TARGET-ort.sh b/t/t6423-merge-rename-directories-TARGET-ort.sh
new file mode 120000
index 00000000000..6bf750c4036
--- /dev/null
+++ b/t/t6423-merge-rename-directories-TARGET-ort.sh
@@ -0,0 +1 @@
+t6423-merge-rename-directories.sh
\ No newline at end of file
diff --git a/t/t6423-merge-rename-directories.sh b/t/t6423-merge-rename-directories.sh
index 5d3b711fe68..1e571384223 100755
--- a/t/t6423-merge-rename-directories.sh
+++ b/t/t6423-merge-rename-directories.sh
@@ -3,2 +3,4 @@
test_description="recursive merge with directory renames"
+# TARGET-ort: GIT_TEST_MERGE_ALGORITHM=ort && export GIT_TEST_MERGE_ALGORITHM=ort
+
# includes checking of many corner cases, with a similar methodology to:
diff --git a/t/test-lib.sh b/t/test-lib.sh
index d3f6af6a654..8d5da7e0ba9 100644
--- a/t/test-lib.sh
+++ b/t/test-lib.sh
@@ -247,2 +247,11 @@ TEST_STRESS_JOB_SFX="${GIT_TEST_STRESS_JOB_NR:+.stress-$GIT_TEST_STRESS_JOB_NR}"
TEST_NAME="$(basename "$0" .sh)"
+if test -L "$0"
+then
+ target=$(echo "$0" | grep -o "TARGET-[^.]*")
+ if test -n "$target"
+ then
+ to_eval=$(grep "^# $target: " "$0" | sed 's/.*://')
+ eval $to_eval
+ fi
+fi
TEST_NUMBER="${TEST_NAME%%-*}"
That implementation's a bit of a hack, and requires SYMLINK (could be
changed), but now I can:
./t6423-merge-rename-directories-TARGET-ort.sh
./t6423-merge-rename-directories.sh
And run the whole thing with/without ort in one go.
Then with a trivial symlink-in-a-loop $(git grep -l MERGE_ALGORITHM)
loop on top I've got ort and non-ort merge tests all in one go on a WIP
topic.
>> And both test_expect_merge_algorithm and what seems to be a common
>> pattern of e.g.:
>>
>> t6400-merge-df.sh: if test "$GIT_TEST_MERGE_ALGORITHM" = ort
>> t6400-merge-df.sh- then
>> t6400-merge-df.sh- test 0 -eq $(git ls-files -o | wc -l)
>> t6400-merge-df.sh- else
>> t6400-merge-df.sh- test 1 -eq $(git ls-files -o | wc -l)
>> t6400-merge-df.sh- fi &&
>>
>> Will not run tests on both backends, I was expecting to find something
>> so we can the test N times for the backends, and declared if things were
>> to be skipped on ort or whatever.
>
> Yeah, multiple ways of testing were discussed mid last year. There
> were lots of tradeoffs. I think the thing that pushed in this
> direction is that we're not just aiming to add another optional merge
> backend, we're aiming to replace merge-recursive entirely. Since
> merge tests appear all throughout the code base, many as rebase or
> cherry-pick or revert or stash tests...or just as simple setup tests,
> we want all of those tested with the new backend. Trying to duplicate
> all those tests in any way other than just re-running the testsuite
> with a different knob would require huge changes to hundreds
> (thousands?) of testfiles and conflict with nearly every other topic.
> So I made an environment variable that would choose which backend to
> use, but with the downside of having to re-run the testsuite again.
>
>> I understand that this is still WIP code, but it would be nice to have
>> it in a state where one can confidently touch merge-ort.c when changing
>> some API or whatever and have it be tested by default.
>
> Thanks for proactively checking. To make it easier for you, I'll see
> if I can submit a series later today that mostly completes the
> merge-ort implementation; the t6423 testcases won't be fixed until
> "Optimization batch 12" lands, and I might not be able to fix the
> "TODO passed" submodule tests in this series, but the rest of the
> stuff can be fixed with about 10-12 patches. I had been worried about
> overloading the list with too many patches at once, but since it
> sounds like you're willing to review these particular patches... :-)
*nod*
Also, I'll try to get to reviewing some of it, thanks for all your work.
B.t.w., if the original E-Mail sounded like complaining that wasn't the
intent. I just thought I'd shoot off a quick message about if I missed
something about the in-flight status / testing of the ort work...
