[PATCH v2 11/13] pull: add pull.mode=fast-forward

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



It is very typical for Git newcomers to inadvertently create merges and
worse; pushing them. This is one of the reasons many experienced users
prefer to avoid 'git pull', and recommend newcomers to avoid it as well.

To escape these problems--and keep 'git pull' useful--it has been
suggested that 'git pull' barfs by default if the merge is
non-fast-forward, which unfortunately would break backwards
compatibility.

This patch leaves everything in place to enable this new mode, but it
only gets enabled if the user specifically configures it:

  pull.mode = fast-forward

Later on this mode can be enabled by default.

For *some* of the long discussions you can read:

https://lore.kernel.org/git/20130522115042.GA20649@xxxxxxxxxxxxxx
https://lore.kernel.org/git/1377988690-23460-1-git-send-email-felipe.contreras@xxxxxxxxx
https://lore.kernel.org/4ay6w9i74cygt6ii1b0db7wg.1398433713382@xxxxxxxxxxxxxxxxx

Signed-off-by: Felipe Contreras <felipe.contreras@xxxxxxxxx>
---
 Documentation/config/pull.txt   |  4 +--
 Documentation/config/remote.txt |  4 +--
 builtin/pull.c                  |  6 ++++-
 rebase.c                        |  2 ++
 rebase.h                        |  3 ++-
 t/t5520-pull.sh                 | 44 +++++++++++++++++++++++++++++++++
 6 files changed, 57 insertions(+), 6 deletions(-)

diff --git a/Documentation/config/pull.txt b/Documentation/config/pull.txt
index f4385cde33..2b5e813259 100644
--- a/Documentation/config/pull.txt
+++ b/Documentation/config/pull.txt
@@ -32,8 +32,8 @@ for details).
 pull.mode::
 	When "git pull" is run, this determines if it would either merge or
 	rebase the fetched branch. The possible values are 'merge',
-	and 'rebase'. See "branch.<name>.pullmode" for setting this on a
-	per-branch basis.
+	'rebase', and 'fast-forward'. See "branch.<name>.pullmode" for setting
+	this on a per-branch basis.
 
 pull.octopus::
 	The default merge strategy to use when pulling multiple branches
diff --git a/Documentation/config/remote.txt b/Documentation/config/remote.txt
index a732c92cf5..e7db1d46c1 100644
--- a/Documentation/config/remote.txt
+++ b/Documentation/config/remote.txt
@@ -87,6 +87,6 @@ remote.<name>.partialclonefilter::
 
 remote.<name>.pullmode::
 	When "git pull" is run, this determines if it would either merge or
-	rebase the branches from this remote. The possible values are 'merge', and
-	'rebase'. See "pull.mode" for doing this in a non
+	rebase the branches from this remote. The possible values are 'merge',
+	'rebase', and 'fast-forward'. See "pull.mode" for doing this in a non
 	repository-specific manner.
diff --git a/builtin/pull.c b/builtin/pull.c
index bfadd585c7..ef23d8a52f 100644
--- a/builtin/pull.c
+++ b/builtin/pull.c
@@ -985,7 +985,7 @@ static void show_advice_pull_non_ff(void)
 		 "\n"
 		 "  git config --global pull.mode merge\n"
 		 "  git config --global pull.mode rebase\n"
-		 "  git config --global pull.ff only       # fast-forward only\n"
+		 "  git config --global pull.mode fast-forward\n"
 		 "\n"
 		 "If unsure, run \"git pull --merge\".\n"
 		 "Read \"git pull --help\" for more information."));
@@ -1027,6 +1027,7 @@ int cmd_pull(int argc, const char **argv, const char *prefix)
 
 		switch (mode) {
 		case PULL_MODE_MERGE:
+		case PULL_MODE_FAST_FORWARD:
 			opt_rebase = REBASE_FALSE;
 			break;
 		case PULL_MODE_REBASE:
@@ -1117,6 +1118,9 @@ int cmd_pull(int argc, const char **argv, const char *prefix)
 
 	can_ff = get_can_ff(&orig_head, &merge_heads.oid[0]);
 
+	if (mode == PULL_MODE_FAST_FORWARD && !can_ff)
+		die(_("The pull was not fast-forward, please either merge or rebase.\n"));
+
 	if (!opt_rebase && !can_ff) {
 		if (opt_verbosity >= 0)
 			show_advice_pull_non_ff();
diff --git a/rebase.c b/rebase.c
index bdfca49886..9fe99b5b16 100644
--- a/rebase.c
+++ b/rebase.c
@@ -40,6 +40,8 @@ enum pull_mode_type pull_mode_parse_value(const char *value)
 		return PULL_MODE_MERGE;
 	else if (!strcmp(value, "rebase") || !strcmp(value, "r"))
 		return PULL_MODE_REBASE;
+	else if (!strcmp(value, "fast-forward") || !strcmp(value, "f"))
+		return PULL_MODE_FAST_FORWARD;
 
 	return PULL_MODE_INVALID;
 }
diff --git a/rebase.h b/rebase.h
index 5ab8f4ddd5..e66a73feb4 100644
--- a/rebase.h
+++ b/rebase.h
@@ -17,7 +17,8 @@ enum pull_mode_type {
 	PULL_MODE_INVALID = -1,
 	PULL_MODE_DEFAULT = 0,
 	PULL_MODE_MERGE,
-	PULL_MODE_REBASE
+	PULL_MODE_REBASE,
+	PULL_MODE_FAST_FORWARD
 };
 
 enum pull_mode_type pull_mode_parse_value(const char *value);
diff --git a/t/t5520-pull.sh b/t/t5520-pull.sh
index 59799ac4d5..45d818065f 100755
--- a/t/t5520-pull.sh
+++ b/t/t5520-pull.sh
@@ -873,4 +873,48 @@ test_expect_success 'git pull --rebase against local branch' '
 	test_cmp expect file2
 '
 
+setup_other () {
+	test_when_finished "git checkout master && git branch -D other test" &&
+	git checkout -b other $1 &&
+	>new &&
+	git add new &&
+	git commit -m new &&
+	git checkout -b test -t other &&
+	git reset --hard master
+}
+
+setup_ff () {
+	setup_other master
+}
+
+setup_non_ff () {
+	setup_other master^
+}
+
+test_expect_success 'fast-forward (pull.mode=fast-forward)' '
+	setup_ff &&
+	git -c pull.mode=fast-forward pull
+'
+
+test_expect_success 'non-fast-forward (pull.mode=fast-forward)' '
+	setup_non_ff &&
+	test_must_fail git -c pull.mode=fast-forward pull
+'
+
+test_expect_success 'non-fast-forward with merge (pull.mode=fast-forward)' '
+	setup_non_ff &&
+	git -c pull.mode=fast-forward pull --merge
+'
+
+test_expect_success 'non-fast-forward with rebase (pull.mode=fast-forward)' '
+	setup_non_ff &&
+	git -c pull.mode=fast-forward pull --rebase
+'
+
+test_expect_success 'non-fast-forward error message (pull.mode=fast-forward)' '
+	setup_non_ff &&
+	test_must_fail git -c pull.mode=fast-forward pull 2> error &&
+	test_i18ngrep "The pull was not fast-forward" error
+'
+
 test_done
-- 
2.30.0.rc0




[Index of Archives]     [Linux Kernel Development]     [Gcc Help]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [V4L]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]     [Fedora Users]

  Powered by Linux