From: Elijah Newren <newren@xxxxxxxxx>
When stash was converted from shell to a builtin, it merely
transliterated the forking of various git commands from shell to a C
program that would fork the same commands. Some of those were converted
over to actual library calls, but much of the pipeline-of-commands
design still remains. Fix some of this by replacing the portion
corresponding to
git diff-index --cached --name-only --diff-filter=A $CTREE >"$a"
git read-tree --reset $CTREE
git update-index --add --stdin <"$a"
rm -f "$a"
into a library function that does the same thing. (The read-tree
--reset was already partially converted over to a library call, but as
an independent piece.) Note here that this came after a merge operation
was performed. The merge machinery always stages anything that cleanly
merges, and the above code only runs if there are no conflicts. Its
purpose is to make it so that when there are no conflicts, all the
changes from the stash are unstaged. However, that causes brand new
files from the stash to become untracked, so the code above first saves
those files off and then re-adds them afterwards.
We replace the whole series of commands with a simple function that will
unstage files that are not newly added. This doesn't fix any bugs in
the usage of these commands, it simply matches the existing behavior but
makes it into a single atomic operation that we can then operate on as a
whole. A subsequent commit will take advantage of this to fix issues
with these commands in sparse-checkouts.
This conversion incidentally fixes t3906.1, because the separate
update-index process would die with the following error messages:
error: uninitialized_sub: is a directory - add files inside instead
fatal: Unable to process path uninitialized_sub
The unstaging of the directory as a submodule meant it was no longer
tracked, and thus as an uninitialized directory it could not be added
back using `git update-index --add`, thus resulting in this error and
early abort. Most of the submodule tests in 3906 continue to fail after
this change, this change was just enough to push the first of those
tests to success.
Signed-off-by: Elijah Newren <newren@xxxxxxxxx>
---
builtin/stash.c | 119 ++++++++++++++++++++++----------------
t/lib-submodule-update.sh | 16 ++---
2 files changed, 78 insertions(+), 57 deletions(-)
diff --git a/builtin/stash.c b/builtin/stash.c
index 3f811f3050..a5465b565a 100644
--- a/builtin/stash.c
+++ b/builtin/stash.c
@@ -325,35 +325,6 @@ static void add_diff_to_buf(struct diff_queue_struct *q,
}
}
-static int get_newly_staged(struct strbuf *out, struct object_id *c_tree)
-{
- struct child_process cp = CHILD_PROCESS_INIT;
- const char *c_tree_hex = oid_to_hex(c_tree);
-
- /*
- * diff-index is very similar to diff-tree above, and should be
- * converted together with update_index.
- */
- cp.git_cmd = 1;
- strvec_pushl(&cp.args, "diff-index", "--cached", "--name-only",
- "--diff-filter=A", NULL);
- strvec_push(&cp.args, c_tree_hex);
- return pipe_command(&cp, NULL, 0, out, 0, NULL, 0);
-}
-
-static int update_index(struct strbuf *out)
-{
- struct child_process cp = CHILD_PROCESS_INIT;
-
- /*
- * Update-index is very complicated and may need to have a public
- * function exposed in order to remove this forking.
- */
- cp.git_cmd = 1;
- strvec_pushl(&cp.args, "update-index", "--add", "--stdin", NULL);
- return pipe_command(&cp, out->buf, out->len, NULL, 0, NULL, 0);
-}
-
static int restore_untracked(struct object_id *u_tree)
{
int res;
@@ -385,6 +356,75 @@ static int restore_untracked(struct object_id *u_tree)
return res;
}
+static void unstage_changes_unless_new(struct object_id *orig_tree)
+{
+ /*
+ * When we enter this function, there has been a clean merge of
+ * relevant trees, and the merge logic always stages whatever merges
+ * cleanly. We want to unstage those changes, unless it corresponds
+ * to a file that didn't exist as of orig_tree.
+ */
+
+ struct diff_options diff_opts;
+ struct lock_file lock = LOCK_INIT;
+ int i;
+
+ /*
+ * Step 1: get a difference between orig_tree (which corresponding
+ * to the index before a merge was run) and the current index
+ * (reflecting the changes brought in by the merge).
+ */
+ diff_setup(&diff_opts);
+ diff_opts.flags.recursive = 1;
+ diff_opts.detect_rename = 0;
+ diff_opts.output_format = DIFF_FORMAT_NO_OUTPUT;
+ diff_setup_done(&diff_opts);
+
+ do_diff_cache(orig_tree, &diff_opts);
+ diffcore_std(&diff_opts);
+
+ /* Iterate over the paths that changed due to the merge... */
+ for (i = 0; i < diff_queued_diff.nr; i++) {
+ struct diff_filepair *p;
+ struct cache_entry *ce;
+ int pos;
+
+ /* Look up the path's position in the current index. */
+ p = diff_queued_diff.queue[i];
+ pos = index_name_pos(&the_index, p->two->path,
+ strlen(p->two->path));
+
+ /*
+ * Step 2: "unstage" changes, as long as they are still tracked
+ */
+ if (p->one->oid_valid) {
+ /*
+ * Path existed in orig_tree; restore index entry
+ * from that tree in order to "unstage" the changes.
+ */
+ int option = ADD_CACHE_OK_TO_REPLACE;
+ if (pos < 0)
+ option = ADD_CACHE_OK_TO_ADD;
+
+ ce = make_cache_entry(&the_index,
+ p->one->mode,
+ &p->one->oid,
+ p->one->path,
+ 0, 0);
+ add_index_entry(&the_index, ce, option);
+ }
+ }
+ diff_flush(&diff_opts);
+
+ /*
+ * Step 3: write the new index to disk
+ */
+ repo_hold_locked_index(the_repository, &lock, LOCK_DIE_ON_ERROR);
+ if (write_locked_index(&the_index, &lock,
+ COMMIT_LOCK | SKIP_IF_UNCHANGED))
+ die(_("Unable to write index."));
+}
+
static int do_apply_stash(const char *prefix, struct stash_info *info,
int index, int quiet)
{
@@ -467,26 +507,7 @@ static int do_apply_stash(const char *prefix, struct stash_info *info,
if (reset_tree(&index_tree, 0, 0))
return -1;
} else {
- struct strbuf out = STRBUF_INIT;
-
- if (get_newly_staged(&out, &c_tree)) {
- strbuf_release(&out);
- return -1;
- }
-
- if (reset_tree(&c_tree, 0, 1)) {
- strbuf_release(&out);
- return -1;
- }
-
- ret = update_index(&out);
- strbuf_release(&out);
- if (ret)
- return -1;
-
- /* read back the result of update_index() back from the disk */
- discard_cache();
- read_cache();
+ unstage_changes_unless_new(&c_tree);
}
if (!quiet) {
diff --git a/t/lib-submodule-update.sh b/t/lib-submodule-update.sh
index 87a759149f..c6d7aab6df 100644
--- a/t/lib-submodule-update.sh
+++ b/t/lib-submodule-update.sh
@@ -316,14 +316,7 @@ test_submodule_switch_common () {
command="$1"
######################### Appearing submodule #########################
# Switching to a commit letting a submodule appear creates empty dir ...
- if test "$KNOWN_FAILURE_STASH_DOES_IGNORE_SUBMODULE_CHANGES" = 1
- then
- # Restoring stash fails to restore submodule index entry
- RESULT="failure"
- else
- RESULT="success"
- fi
- test_expect_$RESULT "$command: added submodule creates empty directory" '
+ test_expect_success "$command: added submodule creates empty directory" '
prolog &&
reset_work_tree_to no_submodule &&
(
@@ -337,6 +330,13 @@ test_submodule_switch_common () {
)
'
# ... and doesn't care if it already exists.
+ if test "$KNOWN_FAILURE_STASH_DOES_IGNORE_SUBMODULE_CHANGES" = 1
+ then
+ # Restoring stash fails to restore submodule index entry
+ RESULT="failure"
+ else
+ RESULT="success"
+ fi
test_expect_$RESULT "$command: added submodule leaves existing empty directory alone" '
prolog &&
reset_work_tree_to no_submodule &&
--
gitgitgadget
