Change the exit code for the likes of "git remote add/rename" to exit
with 2 if the remote in question doesn't exist, and 3 if it
does. Before we'd just die() and exit with the general 128 exit code.
This changes the output message from e.g.:
fatal: remote origin already exists.
To:
error: remote origin already exists.
Which I believe is a feature, since we generally use "fatal" for the
generic errors, and "error" for the more specific ones with a custom
exit code, but this part of the change may break code that already
relies on stderr parsing (not that we ever supported that...).
The motivation for this is a discussion around some code in GitLab's
gitaly which wanted to check this, and had to parse stderr to do so:
https://gitlab.com/gitlab-org/gitaly/-/merge_requests/2695
It's worth noting as an aside that a method of checking this that
doesn't rely on that is to check with "git config" whether the value
in question does or doesn't exist. That introduces a TOCTOU race
condition, but on the other hand this code (e.g. "git remote add")
already has a TOCTOU race.
We go through the config.lock for the actual setting of the config,
but the pseudocode logic is:
read_config();
check_config_and_arg_sanity();
save_config();
So e.g. if a sleep() is added right after the remote_is_configured()
check in add() we'll clobber rermote.NAME.url, and add
another (usually duplicate) remote.NAME.fetch entry (and other values,
depending on invocation).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@xxxxxxxxx>
---
Documentation/git-remote.txt | 11 ++++++++++
builtin/remote.c | 42 ++++++++++++++++++++++++------------
t/t5505-remote.sh | 16 +++++++-------
3 files changed, 47 insertions(+), 22 deletions(-)
diff --git a/Documentation/git-remote.txt b/Documentation/git-remote.txt
index 9659abbf8e..c1f1355f52 100644
--- a/Documentation/git-remote.txt
+++ b/Documentation/git-remote.txt
@@ -203,6 +203,17 @@ The remote configuration is achieved using the `remote.origin.url` and
`remote.origin.fetch` configuration variables. (See
linkgit:git-config[1]).
+EXIT STATUS
+-----------
+
+On success, the exit status is `0`.
+
+When subcommands such as 'add', 'rename' and 'remove' can't find the
+remote in question the exit status is `2`, when the remote already
+exists the exit status is `3`.
+
+On any other error, the exit status may be any other non-zero value.
+
EXAMPLES
--------
diff --git a/builtin/remote.c b/builtin/remote.c
index 64b4b551eb..c1828ca7d2 100644
--- a/builtin/remote.c
+++ b/builtin/remote.c
@@ -191,8 +191,10 @@ static int add(int argc, const char **argv)
url = argv[1];
remote = remote_get(name);
- if (remote_is_configured(remote, 1))
- die(_("remote %s already exists."), name);
+ if (remote_is_configured(remote, 1)) {
+ error(_("remote %s already exists."), name);
+ exit(3);
+ }
strbuf_addf(&buf2, "refs/heads/test:refs/remotes/%s/test", name);
if (!valid_fetch_refspec(buf2.buf))
@@ -686,15 +688,19 @@ static int mv(int argc, const char **argv)
rename.remote_branches = &remote_branches;
oldremote = remote_get(rename.old_name);
- if (!remote_is_configured(oldremote, 1))
- die(_("No such remote: '%s'"), rename.old_name);
+ if (!remote_is_configured(oldremote, 1)) {
+ error(_("No such remote: '%s'"), rename.old_name);
+ exit(2);
+ }
if (!strcmp(rename.old_name, rename.new_name) && oldremote->origin != REMOTE_CONFIG)
return migrate_file(oldremote);
newremote = remote_get(rename.new_name);
- if (remote_is_configured(newremote, 1))
- die(_("remote %s already exists."), rename.new_name);
+ if (remote_is_configured(newremote, 1)) {
+ error(_("remote %s already exists."), rename.new_name);
+ exit(3);
+ }
strbuf_addf(&buf, "refs/heads/test:refs/remotes/%s/test", rename.new_name);
if (!valid_fetch_refspec(buf.buf))
@@ -829,8 +835,10 @@ static int rm(int argc, const char **argv)
usage_with_options(builtin_remote_rm_usage, options);
remote = remote_get(argv[1]);
- if (!remote_is_configured(remote, 1))
- die(_("No such remote: '%s'"), argv[1]);
+ if (!remote_is_configured(remote, 1)) {
+ error(_("No such remote: '%s'"), argv[1]);
+ exit(2);
+ }
known_remotes.to_delete = remote;
for_each_remote(add_known_remote, &known_remotes);
@@ -1511,8 +1519,10 @@ static int set_remote_branches(const char *remotename, const char **branches,
strbuf_addf(&key, "remote.%s.fetch", remotename);
remote = remote_get(remotename);
- if (!remote_is_configured(remote, 1))
- die(_("No such remote '%s'"), remotename);
+ if (!remote_is_configured(remote, 1)) {
+ error(_("No such remote '%s'"), remotename);
+ exit(2);
+ }
if (!add_mode && remove_all_fetch_refspecs(key.buf)) {
strbuf_release(&key);
@@ -1565,8 +1575,10 @@ static int get_url(int argc, const char **argv)
remotename = argv[0];
remote = remote_get(remotename);
- if (!remote_is_configured(remote, 1))
- die(_("No such remote '%s'"), remotename);
+ if (!remote_is_configured(remote, 1)) {
+ error(_("No such remote '%s'"), remotename);
+ exit(2);
+ }
url_nr = 0;
if (push_mode) {
@@ -1633,8 +1645,10 @@ static int set_url(int argc, const char **argv)
oldurl = newurl;
remote = remote_get(remotename);
- if (!remote_is_configured(remote, 1))
- die(_("No such remote '%s'"), remotename);
+ if (!remote_is_configured(remote, 1)) {
+ error(_("No such remote '%s'"), remotename);
+ exit(2);
+ }
if (push_mode) {
strbuf_addf(&name_buf, "remote.%s.pushurl", remotename);
diff --git a/t/t5505-remote.sh b/t/t5505-remote.sh
index 8d62edd98b..c99659d39e 100755
--- a/t/t5505-remote.sh
+++ b/t/t5505-remote.sh
@@ -145,8 +145,8 @@ test_expect_success 'remove remote protects local branches' '
test_expect_success 'remove errors out early when deleting non-existent branch' '
(
cd test &&
- echo "fatal: No such remote: '\''foo'\''" >expect &&
- test_must_fail git remote rm foo 2>actual &&
+ echo "error: No such remote: '\''foo'\''" >expect &&
+ test_expect_code 2 git remote rm foo 2>actual &&
test_i18ncmp expect actual
)
'
@@ -173,24 +173,24 @@ test_expect_success 'remove remote with a branch without configured merge' '
test_expect_success 'rename errors out early when deleting non-existent branch' '
(
cd test &&
- echo "fatal: No such remote: '\''foo'\''" >expect &&
- test_must_fail git remote rename foo bar 2>actual &&
+ echo "error: No such remote: '\''foo'\''" >expect &&
+ test_expect_code 2 git remote rename foo bar 2>actual &&
test_i18ncmp expect actual
)
'
test_expect_success 'add existing foreign_vcs remote' '
test_config remote.foo.vcs bar &&
- echo "fatal: remote foo already exists." >expect &&
- test_must_fail git remote add foo bar 2>actual &&
+ echo "error: remote foo already exists." >expect &&
+ test_expect_code 3 git remote add foo bar 2>actual &&
test_i18ncmp expect actual
'
test_expect_success 'add existing foreign_vcs remote' '
test_config remote.foo.vcs bar &&
test_config remote.bar.vcs bar &&
- echo "fatal: remote bar already exists." >expect &&
- test_must_fail git remote rename foo bar 2>actual &&
+ echo "error: remote bar already exists." >expect &&
+ test_expect_code 3 git remote rename foo bar 2>actual &&
test_i18ncmp expect actual
'
--
2.28.0.297.g1956fa8f8d
