Hi Elijah
On 14/10/2020 22:13, Elijah Newren via GitGitGadget wrote:
From: Elijah Newren <newren@xxxxxxxxx>
Many of our test scripts have several "setup" tests. It's a lot easier
to say
./t0050-filesystem.sh --run=setup,9
in order to run all the setup tests as well as test #9, than it is to
track down what all the setup tests are and enter all their numbers in
the list. Also, I often find myself wanting to run just one or a couple
tests from the test file, but I don't know the numbering of any of the
tests -- to get it I either have to first run the whole test file (or
start counting by hand or figure out some other clever but non-obvious
tricks). It's really convenient to be able to just look at the test
description(s) and then run
./t6416-recursive-corner-cases.sh --run=symlink
or
./t6402-merge-rename.sh --run='setup,unnecessary update'
The beginning of match_test_selector_list() looks like
match_test_selector_list () {
title="$1"
shift
arg="$1"
shift
test -z "$1" && return 0
# Both commas and whitespace are accepted as separators.
OLDIFS=$IFS
IFS=' ,'
set -- $1
IFS=$OLDIFS
# If the first selector is negative we include by default.
include=
case "$1" in
!*) include=t ;;
esac
for selector
do
If I'm reading it correctly the selectors are split on commas and
whitespace which would mean we cannot match on "unnecessary update". I
think we definitely want the ability to include whitespace in the
selectors in order to be able to narrow down the tests that are run. I'm
not sure that there is much value in splitting numbers on whitespace as
it would mean the user has to quote them on the command line so we can
probably just do 'IFS=,'. We'd also need to keep IFS as ',' in the case
statement you add below as well rather than restoring it straight after
the 'set' statement above.
Best Wishes
Phillip
Add such an ability to test selection which relies on merely matching
against the test description.
Signed-off-by: Elijah Newren <newren@xxxxxxxxx>
---
t/README | 29 +++++++++++++++++++----------
t/t0000-basic.sh | 41 +++++++++++++++++++++++++----------------
t/test-lib.sh | 16 ++++++++++------
3 files changed, 54 insertions(+), 32 deletions(-)
diff --git a/t/README b/t/README
index 2adaf7c2d2..0a8b60b5c7 100644
--- a/t/README
+++ b/t/README
@@ -258,16 +258,13 @@ For an individual test suite --run could be used to specify that
only some tests should be run or that some tests should be
excluded from a run.
-The argument for --run is a list of individual test numbers or
-ranges with an optional negation prefix that define what tests in
-a test suite to include in the run. A range is two numbers
-separated with a dash and matches a range of tests with both ends
-been included. You may omit the first or the second number to
-mean "from the first test" or "up to the very last test"
-respectively.
-
-Optional prefix of '!' means that the test or a range of tests
-should be excluded from the run.
+The argument for --run, <test-selector>, is a list of description
+substrings or globs or individual test numbers or ranges with an
+optional negation prefix (of '!') that define what tests in a test
+suite to include (or exclude, if negated) in the run. A range is two
+numbers separated with a dash and matches a range of tests with both
+ends been included. You may omit the first or the second number to
+mean "from the first test" or "up to the very last test" respectively.
If --run starts with an unprefixed number or range the initial
set of tests to run is empty. If the first item starts with '!'
@@ -317,6 +314,18 @@ test in the test suite except from 7 up to 11:
$ sh ./t9200-git-cvsexport-commit.sh --run='!7-11'
+Sometimes there may be multiple tests with e.g. "setup" in their name
+that are needed and rather than figuring out the number for all of them
+we can just use "setup" as a substring/glob to match against the test
+description:
+
+ $ sh ./t0050-filesystem.sh --run=setup,9-11
+
+or one could select both the setup tests and the rename ones (assuming all
+relevant tests had those words in their descriptions):
+
+ $ sh ./t0050-filesystem.sh --run=setup,rename
+
Some tests in a test suite rely on the previous tests performing
certain actions, specifically some tests are designated as
"setup" test, so you cannot _arbitrarily_ disable one test and
diff --git a/t/t0000-basic.sh b/t/t0000-basic.sh
index 923281af93..07105b2078 100755
--- a/t/t0000-basic.sh
+++ b/t/t0000-basic.sh
@@ -705,7 +705,31 @@ test_expect_success '--run empty selectors' "
EOF
"
-test_expect_success '--run invalid range start' "
+test_expect_success '--run substring selector' "
+ run_sub_test_lib_test run-substring-selector \
+ '--run empty selectors' \
+ --run='relevant' <<-\\EOF &&
+ test_expect_success \"relevant test\" 'true'
+ for i in 1 2 3 4 5 6
+ do
+ test_expect_success \"other test #\$i\" 'true'
+ done
+ test_done
+ EOF
+ check_sub_test_lib_test run-substring-selector <<-\\EOF
+ > ok 1 - relevant test
+ > ok 2 # skip other test #1 (--run)
+ > ok 3 # skip other test #2 (--run)
+ > ok 4 # skip other test #3 (--run)
+ > ok 5 # skip other test #4 (--run)
+ > ok 6 # skip other test #5 (--run)
+ > ok 7 # skip other test #6 (--run)
+ > # passed all 7 test(s)
+ > 1..7
+ EOF
+"
+
+test_expect_success '--run keyword selection' "
run_sub_test_lib_test_err run-inv-range-start \
'--run invalid range start' \
--run='a-5' <<-\\EOF &&
@@ -735,21 +759,6 @@ test_expect_success '--run invalid range end' "
EOF_ERR
"
-test_expect_success '--run invalid selector' "
- run_sub_test_lib_test_err run-inv-selector \
- '--run invalid selector' \
- --run='1?' <<-\\EOF &&
- test_expect_success \"passing test #1\" 'true'
- test_done
- EOF
- check_sub_test_lib_test_err run-inv-selector \
- <<-\\EOF_OUT 3<<-\\EOF_ERR
- > FATAL: Unexpected exit with code 1
- EOF_OUT
- > error: --run: invalid non-numeric in test selector: '1?'
- EOF_ERR
-"
-
test_set_prereq HAVEIT
haveit=no
diff --git a/t/test-lib.sh b/t/test-lib.sh
index ef31f40037..a040d54a76 100644
--- a/t/test-lib.sh
+++ b/t/test-lib.sh
@@ -769,6 +769,8 @@ match_pattern_list () {
}
match_test_selector_list () {
+ operation="$1"
+ shift
title="$1"
shift
arg="$1"
@@ -805,13 +807,13 @@ match_test_selector_list () {
*-*)
if expr "z${selector%%-*}" : "z[0-9]*[^0-9]" >/dev/null
then
- echo "error: $title: invalid non-numeric in range" \
+ echo "error: $operation: invalid non-numeric in range" \
"start: '$orig_selector'" >&2
exit 1
fi
if expr "z${selector#*-}" : "z[0-9]*[^0-9]" >/dev/null
then
- echo "error: $title: invalid non-numeric in range" \
+ echo "error: $operation: invalid non-numeric in range" \
"end: '$orig_selector'" >&2
exit 1
fi
@@ -819,9 +821,11 @@ match_test_selector_list () {
*)
if expr "z$selector" : "z[0-9]*[^0-9]" >/dev/null
then
- echo "error: $title: invalid non-numeric in test" \
- "selector: '$orig_selector'" >&2
- exit 1
+ case "$title" in *${selector}*)
+ include=$positive
+ ;;
+ esac
+ continue
fi
esac
@@ -1031,7 +1035,7 @@ test_skip () {
skipped_reason="GIT_SKIP_TESTS"
fi
if test -z "$to_skip" && test -n "$run_list" &&
- ! match_test_selector_list '--run' $test_count "$run_list"
+ ! match_test_selector_list '--run' "$1" $test_count "$run_list"
then
to_skip=t
skipped_reason="--run"
